IEC TS 62436-2008 Guideline for implementation of copy controlled multimedia interface《复印控制多媒体接口的执行用指南》.pdf

1、 IEC/TS 62436 Edition 1.0 2008-02 TECHNICAL SPECIFICATIONGuideline for implementation of copy controlled multimedia interface IEC/TS 62436:2008(E) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publicat

2、ion may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enq

3、uiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Elec

4、trotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure th

5、at you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects,

6、withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online d

7、ictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish t

8、o give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC/TS 62436 Edition 1.0 2008-02 TECHNICAL SPECIFICATIONGuideline for implementation of copy controlled mu

9、ltimedia interface INTERNATIONAL ELECTROTECHNICAL COMMISSION Q ICS 33.160; 35.240.99 PRICE CODE ISBN 2-8318-9612-6 2 TS 62436 IEC:2008(E) CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms, definitions and abbreviations 6 3.1 Terms and definitions 6 3.2 Abbreviations 7 4

10、Relation between interface standards and specifications 7 4.1 IEC standards with copy control information7 4.2 Relation between IEC standards7 4.3 IEC 60958 conformant data format 8 4.3.1 The structure defined in IEC 61883-6 8 4.3.2 Application to the other interface specification.10 4.4 IEC 61937 f

11、ormat based on IEC 6095810 5 Information for copy control11 5.1 Audio 11 5.1.1 SCMS11 5.1.2 Other information.11 5.2 Video 11 6 Implementation of copy control information of audio .11 6.1 IEC 61937 implementation 11 6.2 IEC 61883-6 implementation .12 7 Implementation of copy control information of a

12、udio accompanied with video .12 8 Implementation of other information12 Annex A (informative) Relation between IEC standards and other specifications13 Annex B (informative) Copy control information of audio accompanied with video15 Bibliography16 Figure 1 The relationship between IEC standards 8 Fi

13、gure 2 Sub-frame format .9 Figure 3 IEC 60958 conformant data format.9 Figure 4 The logical structure of IEC 60958 conformant data format 10 Figure 5 IEC 61937 data area 10 Figure A.1 The relationship between IEC 60958, AES3 and CP-340 13 Figure A.2 The relationship IEEE1394 and IEC 61883-6 14 Table

14、 1 IEC standards with copy control information7 Table 2 IEC 60958 conformant data format9 TS 62436 IEC:2008(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ GUIDELINE FOR IMPLEMENTATION OF COPY CONTROLLED MULTIMEDIA INTERFACE FOREWORD 1) The International Electrotechnical Commission (IEC) is a world

15、wide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other ac

16、tivities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subje

17、ct dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions det

18、ermined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Comm

19、ittees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in whic

20、h they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publicat

21、ion and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure tha

22、t they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nat

23、ure whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the reference

24、d publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main t

25、ask of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may propose the publication of a technical specification when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts,

26、 or the subject is still under technical development or where, for any other reason, there is the future but no immediate possibility of an agreement on an International Standard. Technical specifications are subject to review within three years of publication to decide whether they can be transform

27、ed into International Standards. IEC 62436, which is a technical specification, has been prepared by technical area 4: Digital system interfaces and protocols, of IEC technical committee 100: Audio, video and multimedia systems and equipment. 4 TS 62436 IEC:2008(E) The text of this technical specifi

28、cation is based on the following documents: Enquiry draft Report on voting 100/1231/DTS 100/1334/RVC Full information on the voting for the approval of this technical specification can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with

29、 the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be

30、transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. TS 62436 IEC:2008(E) 5 INTRODUCTION Various IEC standards have included methods for transmission of copy control infor

31、mation at the time when they were developed. For instance, IEC 61119-6 defines copyright status bit for DAT recorder, and IEC 60958-3 defines the L bit that is specified in IEC 61119-6. The current consumer products become more complex and use the many IEC standards in one product. For instance, a D

32、VD player produces its high quality audio signal securely through IEC 61883-6, it also performs CD quality audio signal through IEC 60958 or IEC 61937, and the DVD player can produce audio signals through the other interface using IEC 60958 conformant data format, defined in IEC 61883-6. Another exa

33、mple is a digital video recorder with hard disk drive or DVD that produces audio signal to the other audio recorder using IEC 60958 or IEC 61883-6. These consumer products use many interface standards and should give copy control information and other information appropriately. This guideline descri

34、bes the relation between digital interface standards, the relation of copy control information and related information, the method for information implementation. 6 TS 62436 IEC:2008(E) GUIDELINE FOR IMPLEMENTATION OF COPY CONTROLLED MULTIMEDIA INTERFACE 1 Scope This Technical Specification gives a

35、guideline for the implementation of the audio and video interfaces with copy control information. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest

36、 edition of the referenced document (including any amendments) applies. IEC 60958 (all parts), Digital audio interface IEC 60958-1, Digital audio interface Part 1: General IEC 60958-3, Digital audio interface Part 3: Consumer applications IEC 61119-6, Digital audio tape cassette system (DAT) Part 6:

37、 Serial copy management system IEC 61880-2, Video systems (525/60) Video and accompanied data using the vertical blanking interval Analogue interface Part 2: 525 progressive scan system IEC 61883-6, Consumer audio/video equipment Digital interface Part 6: Audio and music data transmission protocol I

38、EC 61909, Audio recording Minidisc system IEC 61937 (all parts), Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 IEC 61937-1, Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 1: General IEC 61937-2, Digital audio Inter

39、face for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 2: Bust-info IEC 62375, Video systems (625/50 progressive) Video and accompanied data using the vertical blanking interval Analogue interface 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of

40、this document, the following terms and definitions apply. 3.1.1 IEC 60958 conformant data format data format that has conformance with the data protocol defined in of IEC 60958 TS 62436 IEC:2008(E) 7 3.2 Abbreviations SCMS serial copy management system, for copy management of one generation CCI copy

41、 control information CGMS-A copy generation management system on analogue video interface 4 Relation between interface standards and specifications 4.1 IEC standards with copy control information IEC standards that have information of copy control are described in Table 1, these standards are the su

42、bjects of this technical specification. Table 1 IEC standards with copy control information IEC standard Description of copy control information IEC 60958-3 Digital audio interface, contains SCMS information IEC 61937-1, IEC 61937-2, IEC 61937-3, IEC 61937-4, IEC 61937-5, IEC 61937-6, IEC 61937-7, I

43、EC 61937-8, IEC 61937-9 Digital audio interface, contains SCMS information (note 1) IEC 61883-6 Digital audio interface, contains SCMS and Audio CCI (note 2) IEC 61119-6 Digital audio tape cassette system, defines SCMS IEC 61909 Minidisc system, describes SCMS IEC 61880-2 525 progressive video syste

44、m, defines VBI with CGMS-A IEC 62375 625 progressive video system, defines VBI with CGMS-A NOTE 1 IEC 61937 does not describe SCMS, that come from the structure of IEC 60958. NOTE 2 SCMS is contained in the IEC 60958 conformant data format. 4.2 Relation between IEC standards Figure 1 shows the relat

45、ion between digital audio interface standards IEC 60958, IEC 61937 and IEC 61883-6. IEC 60958-1 is the fundamental standard of these related standards, and it defines the basic structure. The application standards derived form IEC 60958-1 for the linear PCM audio data transmission are IEC 60958-3 fo

46、r consumer use and IEC 60958-4 for professional use. IEC 61937 is derived from IEC 60958, it specifies the data packet structure based on IEC 60958-1, it is mainly for the transmission of compressed audio data. IEC 61937-1 and IEC 61937-2 specify the general structure. In part 1 and part 2 of IEC 61

47、937, transmission method for the specific compressed audio format are specified from part 3 to part 9. Also IEC 62105 specifies the receiver data transmission using IEC 61937-1 structure. IEC 61883-6 specifies IEC 60958 conformant data format, this format defines IEC 60958-1 structure in IEC 61883-6

48、. IEC 60958 conformant data format can transmit IEC 60958-1 and all of its derivative standards. IEC 60958 conformant data format can be used in any other interface specification applying the definition of the structure of IEC 60958-1. 8 TS 62436 IEC:2008(E) Figure 1 The relationship between IEC sta

49、ndards 4.3 IEC 60958 conformant data format 4.3.1 The structure defined in IEC 61883-6 IEC 60958 conformant data format is defined by IEC 61883-6, this format defines the use of the frame format and sub-frame format defined in IEC 60958-1 as it is. Figure 2 shows the sub-frame format of IEC 60958 defined in IEC 60958-1. Figure 3 shows IEC 60958 conformant data format defined in IEC 61883-6. This defines the sync preamble in 2 bits as described in T