IEC 60204-31-2013 Safety of machinery - Electrical equipment of machines - Part 31 Particular safety and EMC requirements for sewing machines units and systems《.pdf

1、 IEC 60204-31 Edition 4.0 2013-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Safety of machinery Electrical equipment of machines Part 31: Particular safety and EMC requirements for sewing machines, units and systems Scurit des machines quipement lectrique des machines Partie 31: Exigences particul

2、ires de scurit et de CEM pour machines coudre, units et systmes de couture IEC 60204-31:2013 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by an

3、y means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publica

4、tion, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou

5、 mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou c

6、ontactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization th

7、at prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might

8、have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Pub

9、lished - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms cont

10、aining more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or nee

11、d further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologi

12、es apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La rec

13、herche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouv

14、elles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et d

15、finitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des

16、questions contactez-nous: csciec.ch. IEC 60204-31 Edition 4.0 2013-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Safety of machinery Electrical equipment of machines Part 31: Particular safety and EMC requirements for sewing machines, units and systems Scurit des machines quipement lectrique des ma

17、chines Partie 31: Exigences particulires de scurit et de CEM pour machines coudre, units et systmes de couture INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE T ICS 13.110; 61.080 PRICE CODE CODE PRIX ISBN 978-2-83220-749-9 Registered trademark of the Internation

18、al Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 60204-31 IEC:2013 CONT

19、ENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 General requirements . 7 5 Incoming supply conductor terminations and devices for disconnecting and switching off . 7 6 Protection against electric shock 8 7 Protection of equipment 8 8 Equipotential bonding . 9 9

20、 Control circuits and control functions 9 10 Operator interface and machine mounted control devices . 10 11 Controlgear: location, mounting and enclosures . 11 12 Conductors and cables . 12 13 Wiring practices 12 14 Electric motors and associated equipment 12 15 Accessories and lighting . 13 16 Mark

21、ing, warning signs and reference designations 13 17 Technical documentation 13 18 Verification . 14 Annex AA (normative) Electromagnetic compatibility requirements 15 Bibliography 22 Figure AA.1 Ports 15 Figure AA.2 Standard sewing unit for EMC tests 17 Table AA.1 Emission Radiated (enclosure) and c

22、onducted (AC mains) . 18 Table AA.2 Immunity Enclosure port . 19 Table AA.3 Immunity Ports for signal lines and data buses . 20 Table AA.4 Immunity AC input and AC output power ports 21 60204-31 IEC:2013 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SAFETY OF MACHINERY ELECTRICAL EQUIPMENT OF MACHIN

23、ES Part 31: Particular safety and EMC requirements for sewing machines, units and systems FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC i

24、s to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) an

25、d Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with th

26、e IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly

27、 as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that s

28、ense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees u

29、ndertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any

30、attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edit

31、ion of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether dir

32、ect or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispens

33、able for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60204-31 h

34、as been prepared by IEC technical committee 44: Safety of machinery Electrotechnical aspects. This fourth edition cancels and replaces the third edition, published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect t

35、o the previous edition: a) Alignment of the normative references; b) Alignment of titles and subtitles to the IEC 60204-1; c) Revision of Annex AA to align this annex with the relevant IEC standards. 4 60204-31 IEC:2013 The text of this standard is based on the following documents: FDIS Report on vo

36、ting 44/685/FDIS 44/687/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This International Standard is to be used in conjunctio

37、n with IEC 60204-1:2005 and its Amendment 1:2008. This part supplements or modifies the corresponding clauses in IEC 60204-1 so as to convert that publication into the IEC standard dealing with requirements for the electrical equipment of sewing machines, units and systems. Where a particular subcla

38、use of Part 1 is not mentioned in this part, that subclause applies as far as is reasonable. Where this part states “addition“, “modification“ or “replacement“ the relevant text in Part 1 is adapted accordingly. The Annex which is additional to those in Part 1 is lettered AA. A list of all the parts

39、 in the IEC 60204 series, published under the general title Safety of machinery Electrical equipment of machines, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:

40、/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60204-31 IEC:2013 5 SAFETY OF MACHINERY ELECTRICAL EQUIPMENT OF MACHINES Part 31: Particular safety and EMC requirements for sew

41、ing machines, units and systems 1 Scope This clause of Part 1 is replaced by: This part of IEC 60204 applies to the application of electrical and electronic equipment to sewing machines, units and systems, designed specifically for professional use in the sewing industry. NOTE The requirements for s

42、ewing machines for household and similar use can be found in IEC 60335-2-28. The equipment covered by this part commences at the point of connection of the supply to the electrical equipment of the machine (see 5.1). This part is applicable to the electrical equipment or parts of the electrical equi

43、pment which operate with nominal supply voltages not exceeding 1 000 V for alternating current and not exceeding 1 500 V for direct current, and with nominal frequencies not exceeding 200 Hz. It does not cover all the requirements (e.g. guarding, interlocking, control) that are necessary to safeguar

44、d persons from hazards other than electrical hazards and which are specified in other standards. This part applies to sewing units and systems which are installed in dry and well-kept clean locations and which process dry sewing material, as in the clothing industry. Where sewing units and systems a

45、re used in other than dry and well-kept clean locations, more stringent measures can be necessary, which need to be agreed between manufacturer and customer. The noise emission of electrical and electronic equipment for sewing machines is not considered to be a relevant hazard. Therefore this standa

46、rd does not contain any specific requirements on noise. 2 Normative references This clause of Part 1 is applicable except as follows: Additional references: IEC 60204-1:2005, Safety of machinery Electrical equipment of machines Part 1: General requirements Amendment 1:2008 IEC 60364-4-41, Low-voltag

47、e electrical installations Part 4-41: Protection for safety Protection against electric shock IEC 60664-1:2007, Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests 6 60204-31 IEC:2013 IEC 60721-3-3, Classification of environmental conditions Pa

48、rt 3: Classification of groups of environmental parameters and their severities Section 3: Stationary use at weatherprotected locations IEC 60947-1:2007, Low-voltage switchgear and controlgear Part 1: General rules Amendment 1:2010 IEC 61000-3-2, Electromagnetic compatibility (EMC) Part 3-2: Limits

49、Limits for harmonic current emissions (equipment input current 16 A per phase) IEC 61000-3-3, Electromagnetic compatibility (EMC) Part 3-3: Limits Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection IEC 61000-4-2, Electromagnetic compat