IEC 60384-16-2005 Fixed capacitors for use in electronic equipment - Part 16 Sectional specification - Fixed metallized polypropylene film dielectric d.c capaci.pdf

1、 INTERNATIONAL STANDARD IEC 60384-16QC 301200 Second edition 2005-11Fixed capacitors for use in electronic equipment Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors Reference number IEC 60384-16:2005(E) Publication numbering As from 1 January 1997 all

2、 IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publ

3、ication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. I

4、nformation relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has

5、prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches

6、 technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by em

7、ail. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00

8、INTERNATIONAL STANDARD IEC 60384-16QC 301200 Second edition 2005-11Fixed capacitors for use in electronic equipment Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced

9、or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41

10、22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch U For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission 2 60384-16 IEC:2005(E) CONTENTS FOREWORD.4 1 General 7 1.1 Scope7 1.2 Object .7 1.3 Normative references 7 1.4 Informat

11、ion to be given in a detail specification .8 1.5 Terms and definitions 9 1.6 Marking .10 2 Preferred ratings and characteristics 10 2.1 Preferred characteristics .10 2.2 Preferred values of ratings 10 3 Quality assessment procedures11 3.1 Primary stage of manufacture11 3.2 Structurally similar compo

12、nents.11 3.3 Certified records of released lots.11 3.4 Qualification approval12 3.5 Quality conformance inspection.18 4 Test and measurement procedures.19 4.1 Visual examination and check of dimensions.19 4.2 Electrical tests.20 4.3 Robustness of terminations .23 4.4 Resistance to soldering heat .23

13、 4.5 Solderability 23 4.6 Rapid change of temperature 23 4.7 Vibration23 4.8 Bump 24 4.9 Shock24 4.10 Climatic sequence.25 4.11 Damp heat, steady state26 4.12 Endurance.26 4.13 Charge and discharge .26 4.14 Component solvent resistance.28 4.15 Solvent resistance of the marking28 Bibliography29 Table

14、 1 Preferred values9 Table 2 Preferred combinations .11 Table 3 Sampling plan together with numbers of permissible defectives for qualification approval tests .13 Table 4 Test schedule for qualification approval.14 Table 5 Lot-by-lot inspection19 Table 6 Periodic inspection19 60384-16 IEC:2005(E) 3

15、Table 7 Voltages to be applied.20 Table 8 Measurement requirements .21 Table 9 Insulation resistance requirements 21 Table 10 Correction factors22 Table 11 Characteristics at lower category temperature.22 Table 12 Characteristics at upper category temperature 22 Table 13 Preferred severities .24 Tab

16、le 14 Test conditions26 Table 15 Lead spacing.27 4 60384-16 IEC:2005(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors FOREWORD 1) The International Electrot

17、echnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To

18、this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Nation

19、al Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (IS

20、O) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation f

21、rom all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be

22、held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any

23、 divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publica

24、tion. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, proper

25、ty damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in th

26、is publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any o

27、r all such patent rights. International Standard IEC 60384-16 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This second edition cancels and replaces the first edition published in 1982, amendment 1 (1987) and amendment 2 (1992) and constitutes mi

28、nor revisions related to tables, figures and references. The text of this standard is based on the following documents: FDIS Report on voting 40/1595/FDIS 40/1628/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. T

29、his publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 60384-16 IEC:2005(E) 5 IEC 60384 consists of the following parts, under the (new) general title Fixed capacitors for use in electronic equipment: Part 1: Generic specification Part 2: Sectional specification: Fixed m

30、etallized polyethylene-terephthalate film dielectric d.c. capacitors Part 3: Sectional specification: Fixed tantalum chip capacitors Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte Part 5: Sectional specification: Fixed mica dielectric d.c. cap

31、acitors with a rated voltage not exceeding 3000 V Selection of methods of test and general requirements Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric d.c. capacitors Part 7: Sectional specification: Fixed polystyrene film dielectric metal foil d.c. capacitors Part 8

32、 Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 Part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors Part 12: Sectional specification:

33、Fixed polycarbonate film dielectric metal foil d.c. capacitors Part 13: Sectional specification: Fixed polypropylene film dielectric metal foil d.c. capacitors Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Part 15:

34、Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors Part 18:

35、Sectional specification: Fixed aluminium electrolytic chip capacitors with solid and non-solid electrolyte Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric chip d.c. capacitors Part 20: Sectional specification: Fixed metallized polyphenylene sulfide film

36、dielectric chip d.c. capacitors Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 Part 23: Sectional specification: Fixed surface mount

37、metallized polyethylene naphthalate film dielectric d.c. capacitors Part 24: Sectional specification Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte (under consideration) Part 25: Sectional specification Surface mount fixed aluminium electrolytic capaci

38、tors with conductive polymer solid electrolyte (under consideration) All sectional specifications mentioned above do have one or more blank detail specifications being a supplementary document, containing requirements for style, layout and minimum content of detail specifications. 6 60384-16 IEC:200

39、5(E) The QC 301 200 number that appears on the front cover of this publication is the specification number in the IECQ Quality Assessment System for Electronic Components. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicate

40、d on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 60384-16 IEC:2005(E) 7

41、FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors 1 General 1.1 Scope This part of IEC 60384 applies to fixed capacitors with metallized electrodes and poly- propylene dielectric for use in electronic equ

42、ipment. These capacitors may have “self-healing properties“ depending on conditions of use. They are mainly intended for use with direct voltage. Capacitors for alternating voltage and pulse applications are not included, but are covered by IEC 60384-17. The maximum power to be applied is 500 var at

43、 50 Hz and the maximum peak voltage is 2 500 V. Two performance grades of capacitors are covered, Grade 1 for long-life application and Grade 2 for general application. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384-14. Capacitors for electrica

44、l shock hazard protection (covered by IEC 60065) and fluorescent lamp and motor capacitors (covered by IEC technical committee 33, and IEC technical committee 34). 1.2 Object The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60384-1 (1999) the a

45、ppropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of equal or higher performance level,

46、 because lower performance levels are not permitted. 1.3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includ

47、ing any amendments) applies. IEC 60063:1963, Preferred number series for resistors and capacitors Amendment 1 (1967) Amendment 2 (1977) IEC 60068-1, Environmental testing. Part 1: General and guidance IEC 60384-1, Fixed capacitors for use in electronic equipment Part 1: Generic specification IEC 603

48、84-16-1, Fixed capacitors for use in electronic equipment Part 16: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors Assessment level E IEC 60410, Sampling plans and procedures for inspection by attributes ISO 3, Preferred numbers Series of preferred numbers

49、8 60384-16 IEC:2005(E) 1.4 Information to be given in a detail specification Detail specifications shall be derived from the relevant blank detail specification. Detail specifications shall not specify requirements inferior to those of the generic, sectional or blank detail specification. When more severe requirements are included, they shall be listed in 1.9 of the detail specification and indicated in the test sch