IEC 60384-20-1-2008 Fixed capacitors for use in electronic equipment - Part 20-1 Blank detail specification - Fixed metallized polyphenylene sulfide film dielec.pdf

1、 IEC 60384-20-1 Edition 2.0 2008-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 20-1: Blank detail specification Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors Assessment level EZ Condensateurs fixes utiliss

2、dans les quipements lectroniques Partie 20-1: Spcification particulire cadre Condensateurs fixes pour montage en surface pour courant continu dilectrique en film de sulfure de polyphnylne mtallis Niveau dassurance EZ IEC 60384-20-1:2008 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Gen

3、eva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in

4、the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication c

5、ontraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des ques

6、tions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Gen

7、eva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of I

8、EC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of c

9、riteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line

10、and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrot

11、echnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la p

12、remire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ld

13、ition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des info

14、rmations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electroped

15、ia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique Internatio

16、nal (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60384-20-1 Edition 2.0 2008-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic e

17、quipment Part 20-1: Blank detail specification Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors Assessment level EZ Condensateurs fixes utiliss dans les quipements lectroniques Partie 20-1: Spcification particulire cadre Condensateurs fixes pour montage en surface

18、 pour courant continu dilectrique en film de sulfure de polyphnylne mtallis Niveau dassurance EZ INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 31.060.10 PRICE CODE CODE PRIX ISBN 978-2-83220-701-7 Registered trademark of the International Electrotechnical

19、 Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 60384-20-1 IEC:2008 INTERNATIONAL ELECTRO

20、TECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 20-1: Blank detail specification Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors Assessment level EZ FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organi

21、zation for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, I

22、EC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt wi

23、th may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by

24、agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3)

25、IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are

26、used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the

27、 corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have

28、 the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoe

29、ver, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publicati

30、ons is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standar

31、d IEC 60384-20-1 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This second edition cancels and replaces the first edition published in 1996 and constitutes a minor revision related to tables and references. This bilingual version (2013-05) corres

32、ponds to the monolingual English version, published in 2008-01. 60384-20-1 IEC:2008 3 The text of this standard is based on the following documents: FDIS Report on voting 40/1872/FDIS 40/1889/RVD Full information on the voting for the approval of this standard can be found in the report on voting in

33、dicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The list of all parts of the IEC 60384 series, under the (new) general title Fixed capacitors for use in electronic equipment,

34、 can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be

35、 reconfirmed, withdrawn, replaced by a revised edition, or amended. The contents of the corrigendum of February 2008 have been included in this copy. 4 60384-20-1 IEC:2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 20-1: Blank detail specification Fixed metallized polyphenylene sulfide fi

36、lm dielectric surface mount d.c. capacitors Assessment level EZ Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not co

37、mplying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications, the content of 1.4 of the sectional specification shall be taken into account. The numbers between brackets on the first p

38、age correspond to the following information which shall be inserted in the position indicated. Identification of the detail specification 1 The “International Electrotechnical Commission“ or the National Standards Organization under whose authority the detail specification is drafted. 2 The IEC or N

39、ational Standards number of the detail specification, date of issue and any further information required by the national system. 3 The number and issue number of the IEC or national generic specification. 4 The IEC number of the blank detail specification. Identification of the capacitor 5 A short d

40、escription of the type of capacitor. 6 Information on typical construction (when applicable). When the capacitor is not designed for use in printed-board applications, this shall be clearly stated in the detail specification in this position. 7 Outline drawing with main dimensions which are of impor

41、tance for interchangeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in an annex to the detail specification. 8 Application or group of applications covered and/or assessment level. NOTE The assessment level(s) to be used in

42、a detail specification are selected from 3.5.4 of the sectional specification. This implies that one blank detail specification may be used in combination with several assessment levels, provided the grouping of the tests does not change. 9 Reference data on the most important properties, to allow c

43、omparison between the various capacitor types. 60384-20-1 IEC:2008 5 1 IEC 60384-20-1XX 2 QC 302001XXXXXX ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: 3 IEC 60384-20-1 4 QC 302001 FIXED METALLIZED 5 POLYETHYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS Outline drawing:

44、see Table 1) .angle projection 7 Other shapes are permitted within the dimensions given. 6 Assessment level(s): EZ 8 Information on the availability of components qualified to this detail specification is given in the Register of Approvals (9) 1 General data 1.1 Recommended method(s) of mounting (t

45、o be inserted) See 1.4.2 of IEC 60384-20. 1.2 Dimensions Table 1 Dimensions Case size reference Dimensions mm L 1W 1H 1L 2L 3L 4When there is no case size reference, Table 1 may be omitted and the dimensions shall be given in Table 2, which then becomes Table 1. The dimensions shall be given as maxi

46、mum dimensions or as nominal dimensions with a tolerance. 6 60384-20-1 IEC:2008 1.3 Ratings and characteristics Capacitance range (see Table 2) Tolerance on rated capacitance Rated voltage (see Table 2) Category voltage (if applicable) (see Table 2) Climatic category Rated temperature Maximum a.c. v

47、oltage (if applicable) Maximum pulse load (if applicable) Tangent of loss angle Insulation resistance Table 2 Values of capacitance and of voltage related to case sizes Rated voltage Category voltageaRated capacitance (in nF and/or F) Case size Case size Case size Case size aIf different from the ra

48、ted voltage. 1.4 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60384-1

49、 Fixed capacitors for use in electronic equipment Part 1: Generic specification IEC 60384-20, Fixed capacitors for use in electronic equipment Part 20: Sectional specification Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors 1.5 Marking The marking of the capacitor and the package shall be in accordance with the requirement