IEC 60384-26-1-2010 Fixed capacitors for use in electronic equipment - Part 26-1 Blank detail specification - Fixed aluminium electrolytic capacitors with condu.pdf

1、 IEC 60384-26-1 Edition 1.0 2010-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 26-1: Blank detail specification Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte Assessment level EZ Condensateurs fixes utiliss dan

2、s les quipements lectroniques Partie 26-1: Spcification particulire cadre Condensateurs fixes lectrolytiques en aluminium lectrolyte solide en polymre conducteur Niveau dassurance de la qualit EZ IEC 60384-26-1:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All

3、rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the re

4、quester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune part

5、ie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyrigh

6、t de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the I

7、EC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the

8、 IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives

9、information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org Th

10、e worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/websto

11、re/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la pre

12、mire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldit

13、ion la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi

14、des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. E

15、lectropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique In

16、ternational en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00

17、IEC 60384-26-1 Edition1.0 2010-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 26-1: Blank detail specification Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte Assessment level EZ Condensateurs fixes utiliss dans

18、les quipements lectroniques Partie 26-1: Spcification particulire cadre Condensateurs fixes lectrolytiques en aluminium lectrolyte solide en polymre conducteur Niveau dassurance de la qualit EZ INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE Q ICS 31.060.50 PRICE

19、 CODE CODE PRIX ISBN 978-2-88912-169-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60384-26-1 IEC:2010 CONTENTS FOREWORD.3 1 General data 6 1.1 Recommended method(s) of mounting (to be inserted)6 1.2 Dimensions

20、 .6 1.3 Rating and characteristics .7 1.4 Normative references 7 1.5 Marking .8 1.6 Ordering information8 1.7 Certified records of released lots.8 1.8 Additional information (not for inspection)8 1.9 Other requirements for generic or sectional specifications.8 2 Inspection requirements .8 2.1 Proced

21、ures8 2.1.1 Qualification approval8 2.1.2 Quality conformance inspection.8 Bibliography17 Table 1 Case size reference and dimensions .6 Table 2 Values of capacitance and of voltage related to case sizes .7 Table 3 Characteristics 7 Table 4 Other requests (other characteristics) .8 Table 5 Test sched

22、ule for quality conformance inspection9 60384-26-1 IEC:2010 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 26-1: Blank detail specification Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte Assessment level EZ FOREW

23、ORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the elec

24、trical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to tec

25、hnical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Org

26、anization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technic

27、al committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publica

28、tions is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their nation

29、al and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment servi

30、ces and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, serva

31、nts or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publicatio

32、n, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility

33、that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-26-1 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equip

34、ment The text of this standard is based on the following documents: FDIS Report on voting 40/2053/FDIS 40/2063/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with

35、the ISO/IEC Directives, Part 2. 4 60384-26-1 IEC:2010 A list of all parts of the IEC 60384 series can be found, under the general title Fixed capacitors for use in the electronic equipment, on the IEC website. The committee has decided that the contents of this publication will remain unchanged unti

36、l the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60384-26-1 IEC:2010 5 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUI

37、PMENT Part 26-1: Blank detail specification Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte Assessment level EZ Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and

38、 layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specification nor shall they so be described. In the preparation of detail specifications the contents of 1.4 of the sectional speci

39、fication shall be taken into account. The numbers between brackets on the first page correspond to the following information which shall be inserted in the position indicated. Identification of the detail specification 1 The “International Electrotechnical Commission” or the National Standards Organ

40、ization under whose authority the detail specification is drafted. 2 The IEC or National Standards number of the detail specification, date of issue and any further information required by the national system. 3 The number and date of issue of the IEC or National Generic Specification. 4 The number

41、of the IEC or National blank detail specification. Identification of the capacitor 5 A short description of the type of capacitor. 6 Information on typical construction (If applicable). 7 Outline drawing with main dimensions which are of importance for interchange ability and / or reference to the n

42、ational or international documents for outlines. Alternatively, this drawing may be given in an appendix to the detail specification. 8 Application or group of applications covered and / or assessment level. 9 Reference data on the most important properties, to allow comparison between the various c

43、apacitor types. 6 60384-26-1 IEC:2010 124 IEC 60384-26-1 ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: 3 5 Aluminium electrolytic capacitors with conductive polymer solid electrolyte 6 Outline drawing: (see Table 1) ( angle projection) 7 8 Assessment level(s): EZ Information on the a

44、vailability of components qualified to this detail specification is given in the qualified product list. 9 1 General data 1.1 Recommended method(s) of mounting (to be inserted) See IEC 60384-26, 1.4.2 1.2 Dimensions Table 1 Case size reference and dimensions Dimensions in millimeters Case size refer

45、ence L W H d NOTE 1 When there is no case-size reference, decline Table 1 and give the dimensions in Table 2 as Table 1. NOTE 2 Indicate the dimensions as maximum dimension or as nominal dimensions with tolerance. 60384-26-1 IEC:2010 7 1.3 Rating and characteristics Ratings and characteristics are a

46、s listed below. Nominal capacitance range (see Table 2) Tolerance on nominal capacitance Rated voltage (see Table 2) Climatic category Rated temperature Rated ripple current (see Table 3) Tangent of loss angle (see Table 3) Leakage current (see Table 3) Equivalent series resistance (see Table 3) Rev

47、erse voltage (if required in the detail specification) Table 2 Values of capacitance and of voltage related to case sizes Rated voltage Case size Case size Case size Case size Case size Nominal capacitance Table 3 Characteristics U RC NTangent of loss angle at C, . Hz Leakage current at C Equivalent

48、 series resistance at C, Hz Rated ripple current at C, Hz V F Hz A mA or A 1.4 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-20:2008, Environmental testing Part 2-20: Tests Test T Test methods for solderability and resistance to soldering heat of devices with leads IEC 60384-1:2008, Fixed capacitors for use in electronic equipment Part 1: Gener