IEC 60401-3-2015 Terms and nomenclature for cores made of magnetically soft ferrites - Part 3 Guidelines on the format of data appearing in manufacturers catalo.pdf

1、 IEC 60401-3 Edition 2.0 2015-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Terms and nomenclature for cores made of magnetically soft ferrites Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor cores Termes et nomenclature pour noyaux en matr

2、iaux ferrites magntiquement doux Partie 3: Lignes directrices relatives aux formats des donnes figurant dans les catalogues des fabricants de noyaux pour transformateurs et inductances IEC 60401-3:2015-12(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All righ

3、ts reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the reques

4、ter. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie d

5、e cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIE

6、C ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www

7、.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under con

8、stant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Sp

9、ecifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives informat

10、ion on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds

11、leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More th

12、an 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If

13、you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout

14、 ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webst

15、ore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.

16、ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez infor

17、m sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et df

18、initions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniques, en anglais et en franais, extraite

19、s des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des que

20、stions contactez-nous: csciec.ch. IEC 60401-3 Edition 2.0 2015-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Terms and nomenclature for cores made of magnetically soft ferrites Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor cores Termes et

21、 nomenclature pour noyaux en matriaux ferrites magntiquement doux Partie 3: Lignes directrices relatives aux formats des donnes figurant dans les catalogues des fabricants de noyaux pour transformateurs et inductances INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONA

22、LE ICS 29.100.10 ISBN 978-2-8322-3029-9 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous

23、avez obtenu cette publication via un distributeur agr. 2 IEC 60401-3:2015 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Measuring methods . 6 4 Table of material properties and measuring conditions 6 5 Integrity of value 7 6 Reliability 9 Annex A (informative)

24、Breakdown voltage test for insulated ring cores Measurement techniques 11 A.1 Method A 11 A.2 Method B 11 A.2.1 General 11 A.2.2 Method B 1 11 A.2.3 Method B 2 12 A.2.4 Method B 3 12 A.3 Notes on voltage breakdown testing 13 Bibliography 14 Figure A.1 Method A: measurement principle . 11 Figure A.2

25、Method B 1: Measurement principle 12 Figure A.3 Method B 2: Measurement principle 12 Figure A.4 Method B 3: Measurement principle 13 Table 1 Rules for property values given in Table 2 . 7 Table 2 Property values and measuring conditions (1 of 2) 8 IEC 60401-3:2015 IEC 2015 3 INTERNATIONAL ELECTROTEC

26、HNICAL COMMISSION _ TERMS AND NOMENCLATURE FOR CORES MADE OF MAGNETICALLY SOFT FERRITES Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor cores FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for sta

27、ndardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes I

28、nternational Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may partici

29、pate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement betw

30、een the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publicatio

31、ns have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for an

32、y misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding

33、 national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any serv

34、ices carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC Nat

35、ional Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention

36、is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC sha

37、ll not be held responsible for identifying any or all such patent rights. International Standard IEC 60401-3 has been prepared IEC technical committee 51: Magnetic components and ferrite materials. This second edition cancels and replaces the first edition published in 2003. This edition constitutes

38、 a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of reliability in Clause 6. 4 IEC 60401-3:2015 IEC 2015 The text of this standard is based on the following documents: FDIS Report on voting 51/1106/FDIS 51/1121

39、/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60401 series, published under the general title

40、 Terms and nomenclature for cores made of magnetically soft ferrites, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the

41、specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 60401-3:2015 IEC 2015 5 INTRODUCTION For various reasons, a manufacturer may wish to publish in its catalogue typical data for material parameters as measured on test pi

42、eces. It is the object of this part of IEC 60401 to promote the comparability of such information in the area of soft ferrite materials. Except for several specific property limits that should be given separately for each particular core, the properties described in this standard are material charac

43、teristics, intended to facilitate meaningful evaluation of ferrite materials. It should be recognized, however, that there is no direct relation between material characteristics as measured on test pieces and the corresponding parameters measured on other cores, made of the same material, because of

44、 differences in geometry and variation in production processes. Also, the extrapolation of material characteristics to other flux densities and other frequencies will not permit valid comparison of cores of different materials under these new conditions of operation. It is therefore emphasized that

45、it is impossible to design and specify a core on the basis of material properties published by a manufacturer in its catalogue, without due contact with that manufacturer. Also, the publication of material characteristics should not be considered as a guarantee for core properties; for this purpose,

46、 only the specification of that core should be used. It is strongly recommended that, together with the material characteristics, manufacturers publish a note covering the two statements above on the limitations of this kind of information. This standard further addresses the comparability of variou

47、s grades of ferrite from different manufacturers by defining the baseline reliability and temperature performance that is inherent for all MnZn ferrite materials, and the limitations that exist when specifying related performance characteristics in ferrite cores. 6 IEC 60401-3:2015 IEC 2015 TERMS AN

48、D NOMENCLATURE FOR CORES MADE OF MAGNETICALLY SOFT FERRITES Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor cores 1 Scope This part of IEC 60401 gives guidelines for a uniform method of presentation for the properties of magnetically soft fe

49、rrite materials and measuring conditions under which they should be determined. It is intended for use in manufacturers catalogues of transformer and inductor cores, in order to aid the comparability of such data. Additional guidance is given for users and manufacturers concerning testing and specification of reliability for ferrite cores and for devices using ferrite cores. 2 Normative references The following documents, i