IEC 60404-8-4-2013 Magnetic materials - Part 8-4 Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered i.pdf

1、 IEC 60404-8-4 Edition 3.0 2013-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Magnetic materials Part 8-4: Specifications for individual materials Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state Matriaux magntiques Partie 8-4: Spcifications pour matr

2、iaux particuliers Bandes et tles magntiques en acier grains non orients, lamines froid et livres ltat fini IEC60404-8-4:2013 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced

3、or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining a

4、dditional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et

5、 par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, util

6、isez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is th

7、e leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a c

8、orrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and with

9、drawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of elec

10、tronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your fee

11、dback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit

12、 llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications C

13、EI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpubl

14、ished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il con

15、tient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette

16、publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60404-8-4 Edition 3.0 2013-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Magnetic materials Part 8-4: Specifications for individual materials Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-pro

17、cessed state Matriaux magntiques Partie 8-4: Spcifications pour matriaux particuliers Bandes et tles magntiques en acier grains non orients, lamines froid et livres ltat fini INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE S ICS 17.220.20; 29.030 PRICE CODE CODE

18、PRIX ISBN 978-2-83220-786-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu

19、cette publication via un distributeur agr. 2 60404-8-4 IEC:2013 CONTENTS FOREWORD . 4 1 Scope . 6 2 Normative references 6 3 Terms and definitions . 6 4 Classification 7 5 Designation 7 6 General requirements . 7 6.1 Production process 7 6.2 Form of supply . 7 6.3 Delivery condition 8 6.4 Surface co

20、ndition . 8 6.5 Suitability for cutting 8 7 Technical requirements . 9 7.1 Magnetic properties . 9 7.1.1 General . 9 7.1.2 Magnetic polarization . 9 7.1.3 Specific total loss . 13 7.1.4 Anisotropy of loss 13 7.2 Geometrical characteristics and tolerances 13 7.2.1 Thickness 13 7.2.2 Width . 14 7.2.3

21、Length . 14 7.2.4 Edge camber . 14 7.2.5 Flatness (wave factor) 15 7.2.6 Residual curvature . 15 7.3 Technological characteristics . 15 7.3.1 Density 15 7.3.2 Stacking factor . 15 7.3.3 Number of bends . 15 7.3.4 Internal stresses 15 8 Inspection and testing . 15 8.1 General . 15 8.2 Selection of sa

22、mples 16 8.3 Preparation of test specimens 16 8.3.1 Magnetic properties . 16 8.3.2 Geometrical characteristics and tolerances 16 8.3.3 Technological characteristics . 17 8.4 Test methods 17 8.4.1 General . 17 8.4.2 Magnetic properties . 17 8.4.3 Geometrical characteristics and tolerances 18 8.4.4 Te

23、chnological characteristics . 18 8.5 Retests 18 9 Marking, labelling and packaging 19 10 Complaints . 19 11 Information to be supplied by the purchaser 19 60404-8-4 IEC:2013 3 Annex A (informative) Non-specified magnetic properties . 20 Annex B (informative) European steel numbers 21 Annex C (inform

24、ative) Calculation of density values 22 Bibliography 23 Table 1 Technological properties and magnetic properties measured by the Epstein method (1 of 2) . 10 Table 2 Technological properties and magnetic properties measured by the Epstein method for strip and sheet of nominal thickness 0,47 mm for u

25、se at 60 Hz only 12 Table 3 Tolerances on nominal width 14 Table A.1 Non-specified properties . 20 Table B.1 European steel numbers . 21 4 60404-8-4 IEC:2013 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MAGNETIC MATERIALS Part 8-4: Specifications for individual materials Cold-rolled non-oriented elec

26、trical steel strip and sheet delivered in the fully-processed state FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote internati

27、onal co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter re

28、ferred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate

29、in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an intern

30、ational consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasona

31、ble efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC P

32、ublications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformi

33、ty. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication

34、 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for

35、 costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct ap

36、plication of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60404-8-4 has been prepared by IE

37、C technical committee 68: Magnetic alloys and steels, in collaboration with ISO technical committee 17: Steel. This third edition cancels and replaces the second edition published in 1998. It constitutes a technical revision. This edition includes the following significant technical changes with res

38、pect to the previous edition: Deletion of the dates for all normative references (see Clause 2); Introduction of the new grades M210-35A 5 and M230-50A 5 (see Table 1). 60404-8-4 IEC:2013 5 The text of this standard is based on the following documents: CDV Report on voting 68/436/CDV 68/450/RVC Full

39、 information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60404 series, published under the general title Magnetic

40、 materials, can be found on the IEC website. 6 60404-8-4 IEC:2013 MAGNETIC MATERIALS Part 8-4: Specifications for individual materials Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state 1 Scope This part of IEC 60404 defines the grades of cold-rolled non

41、oriented electrical steel strip and sheet in nominal thicknesses of 0,35 mm, 0,50 mm, 0,65 mm and 1,00 mm. In particular, it specifies general requirements, the magnetic properties, geometric characteristics and tolerances, and technological characteristics, as well as the inspection procedure. Thi

42、s standard gives in Table 2 the magnetic properties of cold-rolled non-oriented electrical steel strip and sheet of nominal thickness 0,47 mm for use at 60 Hz only. This standard applies to materials supplied in the fully annealed condition intended for the construction of magnetic circuits. It does

43、 not apply to semi-processed material. These magnetic materials correspond to class C.21 of IEC 60404-1. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition

44、cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050 (all parts), International Electrotechnical Vocabulary (available at ) IEC 60404-2, Magnetic materials Part 2: Methods of measurement of the magnetic properties of elect

45、rical steel sheet and strip by means of an Epstein frame IEC 60404-9, Magnetic materials Part 9: Methods of determination of the geometrical characteristics of magnetic steel sheet and strip IEC 60404-13, Magnetic materials Part 13: Methods of measurement of density, resistivity and stacking factor

46、of electrical steel sheet and strip ISO 404, Steel and steel products General technical delivery requirements ISO 7799, Metallic materials Sheet and strip 3 mm thick or less Reverse bend test ISO 10474, Steel and steel products Inspection documents 3 Terms and definitions For the purposes of this do

47、cument, the terms and definitions relating to magnetic properties given in IEC 60050-121 and IEC 60050-221 and the following apply. 60404-8-4 IEC:2013 7 3.1 edge camber greatest distance between a longitudinal edge of the sheet and the line joining the two extremities of the measured length of this

48、edge 3.2 flatness property of a sheet or a length of strip which is characterized by the wave factor, i.e. by the relation of the height of the wave to its length 3.3 number of bends number of alternate bends possible before the appearance in the base metal of the first crack visible to the naked ey

49、e Note 1 to entry: The number of bends constitutes an indication of the ductility of the material. 3.4 internal stresses deviation from the shearing line due to internal stresses 4 Classification The grades covered by this standard are classified according to the value of maximum specific total loss in watts per kilogram at 1,5 T and according to the nominal thickness of the material (0,35