IEC 60404-8-7-2017 Magnetic materials - Part 8-7 Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered.pdf

1、 IEC 60404-8-7 Edition 4.0 2017-09 REDLINE VERSION Magnetic materials Part 8-7: Specifications for individual materials Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state IEC 60404-8-7:2017-09 RLV(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECT

2、ED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs mem

3、ber National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel

4、.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and r

5、elated technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone applica

6、tion for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publi

7、cations by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications rel

8、eased. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the Inter

9、national Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of

10、 IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60404-8-7 Edition 4.0 2017-09 REDLINE VERSION Magnetic materials Part 8-7: S

11、pecifications for individual materials Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.030 ISBN 978-2-8322-4837-9 Registered trademark of the International Electrotechnical Commission Warning! Make su

12、re that you obtained this publication from an authorized distributor. colour inside 2 IEC 60404-8-7:2017 RLV IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Classification . 8 5 Designation . 8 6 General requirements 8 6.1 Production process . 8 6.2 Form

13、 of supply 8 6.3 Delivery condition . 9 6.4 Surface condition 9 6.5 Suitability for cutting . 9 7 Technical requirements . 9 7.1 Magnetic properties 9 7.1.1 General . 9 7.1.2 Magnetic polarization . 9 7.1.3 Specific total loss 10 7.2 Geometric characteristics and tolerances 11 7.2.1 Thickness 11 7.2

14、.2 Width . 12 7.2.3 Length . 13 7.2.4 Edge camber . 13 7.2.5 Flatness Edge wave (wave factor) . 13 7.2.6 Residual curvature . 13 7.2.7 Burr height . 13 7.3 Technological characteristics 13 7.3.1 Density 13 7.3.2 Stacking factor. 13 7.3.3 Number of bends . 13 7.3.4 Internal stresses 13 7.3.5 Insulati

15、on coating resistance . 14 8 Inspection and testing 14 8.1 General . 14 8.2 Selection of samples . 14 8.3 Preparation of test specimens . 15 8.3.1 Magnetic properties . 15 8.3.2 Geometrical characteristics and tolerances 15 8.3.3 Technological characteristics . 15 8.4 Test methods 16 8.4.1 General .

16、 16 8.4.2 Magnetic properties . 16 8.4.3 Geometrical characteristics and tolerances 16 8.4.4 Technological characteristics . 17 8.5 Retests . 17 9 Marking, labelling and packaging . 17 IEC 60404-8-7:2017 RLV IEC 2017 3 10 Complaints 18 11 Information to be supplied by the purchaser 18 Annex A (infor

17、mative) European steel designation . Bibliography 20 Table 1 Technological and magnetic properties of the conventional grades of grain- oriented material electrical steel strip and sheet . 10 Table 2 Technological and magnetic properties of the high permeability grades of grain-oriented material ele

18、ctrical steel strip and sheet 11 Table 3 Tolerances on nominal width . 12 4 IEC 60404-8-7:2017 RLV IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MAGNETIC MATERIALS Part 8-7: Specifications for individual materials Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fu

19、lly-processed state FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning st

20、andardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their prepar

21、ation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely w

22、ith the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant su

23、bjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technic

24、al content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent

25、 possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide co

26、nformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its di

27、rectors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses aris

28、ing out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is

29、drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. DISCLAIMER This Redline version is not an official IEC Standard and is intended only to provide the user wi

30、th an indication of what changes have been made to the previous version. Only the current version of the standard is to be considered the official document. This Redline version provides you with a quick and easy way to compare all the changes between this standard and its previous edition. A vertic

31、al bar appears in the margin wherever a change has been made. Additions are in green text, deletions are in strikethrough red text. IEC 60404-8-7:2017 RLV IEC 2017 5 International Standard IEC 60404-8-7 has been prepared by IEC technical committee 68: Magnetic alloys and steels. This fourth edition

32、cancels and replaces the third edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: extension of the range of electrical steels to include the improved grades. The text of thi

33、s International Standard is based on the following documents: CDV Report on voting 68/545/CDV 68/561/RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with

34、 the ISO/IEC Directives, Part 2. A list of all the parts in the IEC 60404 series, published under the general title Magnetic materials, can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC we

35、bsite under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The “colour inside” logo on the cov

36、er page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this publication using a colour printer. 6 IEC 60404-8-7:2017 RLV IEC 2017 MAGNETIC MATERIALS Part 8-7: Specifications for indi

37、vidual materials Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state 1 Scope This part of IEC 60404 defines the grades of cold-rolled grain-oriented electrical steel strip and sheet in nominal thicknesses of 0,23 mm, 0,27 mm, 0,30 mm and 0,35 mm. In par

38、ticular, it gives general requirements, magnetic properties, geometric characteristics, tolerances and technological characteristics, as well as inspection procedures. This document applies to Goss textured grain-oriented electrical steel strip and sheet supplied in the final annealed condition in c

39、oils or sheets, and intended for the construction of magnetic circuits. The grades are grouped into two classes: conventional grades; high permeability grades, including grades which may be delivered in the domain refined condition. They correspond to Class C22 of IEC 60404-1. 2 Normative references

40、 The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) appli

41、es. IEC 60050-121, International Electrotechnical Vocabulary Part 121: Electromagnetism (available at http:/www.electropedia.org/) IEC 60050-221, International Electrotechnical Vocabulary Chapter 221: Magnetic materials and components (available at http:/www.electropedia.org/) IEC 60404-1, Magnetic

42、materials Part 1: Classification IEC 60404-1-1, Magnetic materials Part 1-1: Classification - Surface insulations of electrical steel sheet, strip and laminations IEC 60404-2, Magnetic materials Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of

43、 an Epstein frame IEC 60404-3:1992, Magnetic materials Part 3: Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester IEC 60404-3:1992/AMD1:2002 IEC 60404-9, Magnetic materials Part 9: Methods of determination of the geometrical characteristic

44、s of magnetic steel sheet and strip IEC 60404-8-7:2017 RLV IEC 2017 7 IEC 60404-11, Magnetic materials Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip IEC 60404-13, Magnetic materials Part 13: Methods of measurement of density, resistivity a

45、nd stacking factor of electrical steel sheet and strip ISO 404, Steel and steel products General technical delivery requirements ISO 7799, Metallic materials Sheet and strip 3 mm thick or less Reverse bend test ISO 10474, Steel and steel products Inspection documents 3 Terms and definitions For the

46、purposes of this document, the terms and definitions of the principal terms relating to magnetic properties given in IEC 60050-121 and IEC 60050-221 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: availab

47、le at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1 edge camber greatest distance between a longitudinal edge of a length of strip or a sheet and the line joining the two extremities of the measured length of this edge Note 1 to entry: See IEC 60404

48、-9. 3.2 flatness (wave factor) the property of a sheet or of a length of strip which is characterized by the wave factor, i.e. by the relation of the height of the wave to its length NOTE See IEC 60404-9. 3.2 edge wave wave factor variations of flatness of a length of strip or a sheet taking a form

49、of waves at the slit edge of the product Note 1 to entry: The edge wave is characterized by the wave factor which is the relation of the height of the wave to its length, expressed as a percentage. 3.3 number of bends number of alternate bends possible before the appearance of the first crack in the base metal visible to the naked eye Note 1 to entry: The number of bends constitutes an indication of the ductility of the material product. 3.4 internal stresses st