IEC 60455-3-8-2013 Resin based reactive compounds used for electrical insulation - Part 3 Specifications for individual materials - Sheet 8 Resins for cable acc.pdf

1、 IEC 60455-3-8 Edition 1.0 2013-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 8: Resins for cable accessories Composs ractifs base de rsines utiliss comme isolants lectriques Partie 3

2、 Spcifications pour matriaux particuliers Feuille 8: Rsines pour accessoires de cble IEC 60455-3-8:2013 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any f

3、orm or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to

4、this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, le

5、ctronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes

6、ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global org

7、anization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amen

8、dment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications.

9、IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrica

10、l terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this public

11、ation or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et au

12、x technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/sear

13、chpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform

14、sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000

15、 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vo

16、us avez des questions contactez-nous: csciec.ch. IEC 60455-3-8 Edition 1.0 2013-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 8: Resins for cable accessories Composs ractifs base de r

17、sines utiliss comme isolants lectriques Partie 3: Spcifications pour matriaux particuliers Feuille 8: Rsines pour accessoires de cble INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 29.035.01 PRICE CODE CODE PRIX ISBN 978-2-83220-758-1 Registered trademark

18、of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 6045

19、5-3-8 IEC:2013 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 7 4 Designation 7 5 Type testing . 7 5.1 General . 7 5.2 Sampling . 8 5.3 Preparation and conditioning . 8 5.3.1 General . 8 5.3.2 Individual components prior to mixing 8 5.3.3 Resi

20、n just after mixing (curing stage) . 8 5.3.4 Cured resin (original) . 8 5.3.5 Cured resin after thermal ageing (dry and wet) 8 5.4 Sequence of tests . 8 5.5 Test report 9 6 Test methods . 9 7 Information on supply, packaging, marking and labelling 12 7.1 Packaging . 12 7.2 Marking and labelling 12 7

21、2.1 General . 12 7.2.2 Components 12 7.2.3 Accessory kit . 12 Bibliography 13 Table 1 Categories of resins 7 Table 2 Type tests: test methods and requirements . 10 60455-3-8 IEC:2013 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION Part 3:

22、Specifications for individual materials Sheet 8: Resins for cable accessories FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

23、 international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (he

24、reafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also p

25、articipate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible

26、 an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While

27、all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to

28、apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation

29、of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this

30、publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indir

31、ect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the

32、 correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60455-3-8 has been pre

33、pared by IEC technical committee 15: Solid electrical insulating materials, in collaboration with working group 11 of Cenelec technical committee 20. The text of this standard is based on the following documents: FDIS Report on voting 15/701/FDIS 15/711/RVD Full information on the voting for the app

34、roval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 60455-3-8 IEC:2013 A list of all the parts in the IEC 60455 series, published under the general title Resin based reactive

35、compounds used for electrical insulation, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At th

36、is date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60455-3-8 IEC:2013 5 INTRODUCTION This part of IEC 60455-3-8 is one of a series which deals with specifications for reactive compounds and their components for electrical insulation. This series consi

37、st of three parts: Part 1: Definitions and general requirements (IEC 60455-1); Part 2: Methods of test (IEC 60455-2); Part 3: Specifications for individual materials (IEC 60455-3) IEC 60455-3-8 consists of one of the sheets comprising Part 3 as follows: Sheet 8: Resins for cable accessories 6 60455-

38、3-8 IEC:2013 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION Part 3: Specifications for individual materials Sheet 8: Resins for cable accessories 1 Scope This sheet 8 of IEC 60455-3 gives the requirements for resins for power cable accessories which conform to this specification and m

39、eet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not on this specification alone. 2 Normative references The following documents, in w

40、hole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60093, Methods of test for volum

41、e resistivity and surface resistivity of solid electrical insulating materials IEC 60212, Standard conditions for use prior to and during the testing of solid electrical insulating materials IEC 60243-1, Electric strength of insulating materials Test methods Part 1: Tests at power frequencies IEC 60

42、250, Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths IEC 60455-2, Resin based reactive compounds used for electrical insulation Part 2: Methods of test

43、 1ISO 179 (all parts), Plastics Determination of Charpy impact properties ISO 527 (all parts), Plastics Determination of tensile properties ISO 868, Plastics and ebonite Determination of indentation hardness by means of a durometer (Shore hardness) ISO 1183-1, Plastics Methods for determining the de

44、nsity of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method ISO 2555, Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method 1Third edition to be published. 60455-3-8 IEC:2013 7 I

45、SO 4895, Plastics Liquid epoxy resins Determination of tendency to crystallize 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 tendency to crystallization measurement of the ability of epoxy base resin not to change from a liquid to a solid s

46、tate at a certain temperature close to water freezing point for a fixed time 3.2 type tests tests made on materials or components of a cable accessory in order to demonstrate satisfactory performance characteristics to meet the intended application 3.3 outer protection cured resinous compound to pro

47、tect the connections from damage by external mechanical forces 4 Designation Resins for cable accessories are classified according to their application in categories as follows: Table 1 Categories of resins Voltage Class Function Characteristic Low Voltage (L) Outer Protection (OP) Cures in presence

48、 of water a(W) Medium Voltage (M) Insulation (I) a Low foaming during curing when in contact with water as described in the subclause dealing with curing under water in IEC 60455-2. A resin is identified by a combination of categories. For example: Low voltage compound for outer protection: L-OP; Lo

49、w voltage compound for insulation, curing in presence of water: L-I-W; Low voltage compound for insulation and mechanical protection: L-OP-I. Tests for type testing are carried out in accordance with each of the resin categories. Low voltage: 0,6/1,0 (1,2) kV Medium voltage: 20,8/36 (42) kV 5 Type testing 5.1 General Tests shall be carried out based on the category of the resins as defined i