IEC 60512-19-1-2010 Connectors for electronic equipment - Tests and measurements - Part 19-1 Chemical resistance tests - Test 19a Fluid resistance of pre-insula.pdf

1、 IEC 60512-19-1Edition 1.0 2010-03INTERNATIONAL STANDARD NORME INTERNATIONALEConnectors for electronic equipment Tests and measurements Part 19-1: Chemical resistance tests Test 19a: Fluid resistance of pre-insulated crimp barrels Connecteurs pour quipements lectroniques Essais et mesures Partie 19-

2、1: Essais de rsistance chimique Essai 19a: Rsistance aux fluides des cosses de sertissage prisoles IEC60512-19-1:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or util

3、ized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining addition

4、al rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par au

5、cun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez le

6、s coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that pre

7、pares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have b

8、een published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/onlin

9、e_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000

10、terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, p

11、lease visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trai

12、t llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de

13、 la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www

14、.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques

15、 et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous d

16、sirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60512-19-1Edition 1.0 2010-03INTERNATIONAL STANDARD NORME INTERNATIONALEConnectors for electro

17、nic equipment Tests and measurements Part 19-1: Chemical resistance tests Test 19a: Fluid resistance of pre-insulated crimp barrels Connecteurs pour quipements lectroniques Essais et mesures Partie 19-1: Essais de rsistance chimique Essai 19a: Rsistance aux fluides des cosses de sertissage prisoles

18、INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE EICS 31.220.01 PRICE CODECODE PRIXISBN 2-8318-1085-6 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60512-19-1 IEC:2010 INTERNAT

19、IONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 19-1: Chemical resistance tests Test 19a: Fluid resistance of pre-insulated crimp barrels FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardizatio

20、n comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Internationa

21、l Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in thi

22、s preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two

23、organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the

24、form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpr

25、etation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or

26、 regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried

27、 out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Commit

28、tees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to

29、the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be he

30、ld responsible for identifying any or all such patent rights. International Standard IEC 60512-19-1 has been prepared by subcommittee 48B: Connectors, of IEC technical committee 48: Electromechanical components and mechanical structures for electronic equipment. This standard cancels and replaces Te

31、st 19a of IEC 60512-9, issued in 1992. The structure of IEC 60512 series is explained in IEC 60512-1-100. 60512-19-1 IEC:2010 3 The text of this standard is based on the following documents: CDV Report on voting 48B/2022/CDV 48B/2112/RVC Full information on the voting for the approval of this standa

32、rd can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 60512 series, under the general title Connectors for electronic equipment Tests and measurements, can be found on

33、the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, r

34、eplaced by a revised edition, or amended. 4 60512-19-1 IEC:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 19-1: Chemical resistance tests Test 19a: Fluid resistance of pre-insulated crimp barrels 1 Scope and object This part of IEC 60512, when required by the detail specificati

35、on, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard method to assess the ability of the insulation of pre-insulated crimp barrels to withst

36、and specified fluids under specified conditions. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including an

37、y amendments) applies. IEC 60512-1-1, Connectors for electronic equipment Tests and measurements Part 1-1: General examination Test 1a: Visual examination IEC 60512-4-3, Connectors for electronic equipment Tests and measurements Part 4-3: Voltage stress tests Test 4c: Voltage proof of pre-insulated

38、crimp barrels 3 Preparation of the specimen The specimen shall consist of a crimp contact or a terminal end having a pre-insulated crimp barrel and the appropriate cable/wire and shall be prepared in accordance with the detail specification. The cable or wire, stripped as specified, shall be fitted

39、to the crimp barrel and then crimped in the normal manner. The specimen shall be visually examined with a suitable magnification (e.g. 2 X to 4 X) in accordance with IEC 60512-1-1, test 1a to ensure that the insulation of the crimped barrel is free of splits or cuts which would render the test inval

40、id. 4 Test method 4.1 Conditioning The specimen shall be immersed for 20 h (unless otherwise specified in the detail specification) in the fluid and at the temperature specified in the detail specification. Two specimens shall be immersed in each fluid. No specimen shall be subjected to more than on

41、e fluid. 60512-19-1 IEC:2010 5 4.2 Recovery After removal from the fluid, the specimen shall be allowed to recover for 1 h under standard atmospheric conditions, after which any remaining fluid shall be wiped away. 5 Final measurements 5.1 Visual examination The specimen shall be visually examined w

42、ith a suitable magnification (e.g. 2 X to 4 X) in accordance with IEC 60512-1-1, test 1a. 5.2 Voltage proof After the visual examination, the specimen shall be prepared and then submitted to the voltage proof test as detailed in IEC 60512-4-3, test 4c. The proof voltage shall be as specified in the

43、detail specification. 6 Requirements 6.1 Visual examination There shall be no signs of splitting or other deterioration which would impair use. Discolouration of the insulation is permitted. 6.2 Voltage proof There shall be no breakdown or flashover. 6.3 Details to be specified When this test is req

44、uired by the detail specification, the following details shall be specified: a) preparation of the specimen; b) cable or wire to be used; c) type and die setting of crimping tool; d) fluid and temperature; e) immersion time if other than 20 h; f) proof voltage; g) any deviation from the standard tes

45、t method. _ 6 60512-19-1 CEI:2010 COMMISSION LECTROTECHNIQUE INTERNATIONALE _ CONNECTEURS POUR QUIPEMENTS LECTRONIQUES ESSAIS ET MESURES Partie 19-1: Essais de rsistance chimique Essai 19a: Rsistance aux fluides des cosses de sertissage prisoles AVANT-PROPOS 1) La Commission Electrotechnique Interna

46、tionale (CEI) est une organisation mondiale de normalisation compose de lensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CEI a pour objet de favoriser la coopration internationale pour toutes les questions de normalisation dans les domaines de llectricit et de llectro

47、nique. A cet effet, la CEI entre autres activits publie des Normes internationales, des Spcifications techniques, des Rapports techniques, des Spcifications accessibles au public (PAS) et des Guides (ci-aprs dnomms “Publication(s) de la CEI“). Leur laboration est confie des comits dtudes, aux travau

48、x desquels tout Comit national intress par le sujet trait peut participer. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec la CEI, participent galement aux travaux. La CEI collabore troitement avec lOrganisation Internationale de Normalisation (ISO), selo

49、n des conditions fixes par accord entre les deux organisations. 2) Les dcisions ou accords officiels de la CEI concernant les questions techniques reprsentent, dans la mesure du possible, un accord international sur les sujets tudis, tant donn que les Comits nationaux de la CEI intresss sont reprsents dans c