IEC 60603-7-82-2016 Connectors for electronic equipment - Part 7-82 Detail specification for 8-way 12 contacts shielded free and fixed connectors for data trans.pdf

1、 IEC 60603-7-82 Edition 1.0 2016-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Connectors for electronic equipment Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz Connecteurs pour quipements lectroni

2、ques Partie 7-82: Spcification particulire pour les fiches et les embases crantes 8 voies et 12 contacts pour la transmission de donnes des frquences jusqu 2 000 MHz IEC 60603-7-82:2016-08(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unl

3、ess otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have

4、 any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publicat

5、ion ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsi

6、rez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About th

7、e IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by

8、the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Te

9、chnical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects,

10、 replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online d

11、ictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminolo

12、gy entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on

13、 this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectron

14、ique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application aut

15、onome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance per

16、met de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC

17、. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que

18、 les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications

19、 IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60603-7-82 Edi

20、tion 1.0 2016-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Connectors for electronic equipment Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz Connecteurs pour quipements lectroniques Partie 7-82: S

21、pcification particulire pour les fiches et les embases crantes 8 voies et 12 contacts pour la transmission de donnes des frquences jusqu 2 000 MHz INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 31.220.10 ISBN 978-2-8322-3556-0 Registered trademark of the Int

22、ernational Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60603-7-82

23、:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references. 7 3 Terms and definitions 8 4 Common features and isometric view . 8 5 Cable terminations and internal connections Fixed and free connectors . 8 6 Gauges . 8 7 Characteristics 9 7.1 General . 9 7.2 Pin and pair g

24、rouping assignment 9 7.3 Classification into climatic category . 9 7.4 Electrical characteristics 9 7.5 Transmission characteristics . 9 7.5.1 General . 9 7.5.2 Insertion loss . 10 7.5.3 Return loss 10 7.5.4 Propagation delay 10 7.5.5 Delay skew 10 7.5.6 NEXT . 11 7.5.7 Power sum NEXT (for informati

25、on only) 11 7.5.8 FEXT . 11 7.5.9 Power sum FEXT (for information only). 11 7.5.10 Transverse conversion loss 12 7.5.11 Transverse conversion transfer loss . 12 7.5.12 Coupling attenuation 12 7.5.13 Power sum alien (exogenous) NEXT . 12 7.5.14 Power sum alien (exogenous) FEXT . 13 7.6 Mechanical . 1

26、3 7.6.1 Mechanical operation . 13 7.6.2 Effectiveness of connector coupling devices . 13 7.6.3 Insertion and withdrawal forces 13 8 Tests and test schedule . 13 8.1 General . 13 8.2 Arrangement for contact resistance test . 13 8.3 Arrangement for vibration test . 13 8.4 Test procedures and measuring

27、 methods . 13 8.5 Preconditioning . 14 8.6 Wiring and mounting of specimens 14 8.6.1 Wiring 14 8.6.2 Mounting 14 8.7 Test schedules 14 8.7.1 General . 14 8.7.2 Basic (minimum) test schedule . 14 8.7.3 Full test schedule . 14 Bibliography . 17 IEC 60603-7-82:2016 IEC 2016 3 Figure 1 Diagram of the in

28、terrelation of the documents . 6 Table 1 Test group EP . 15 4 IEC 60603-7-82:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequenci

29、es up to 2 000 MHz FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning sta

30、ndardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their prepara

31、tion is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely wi

32、th the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant sub

33、jects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technica

34、l content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent

35、possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide con

36、formity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its dir

37、ectors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arisi

38、ng out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is d

39、rawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60603-7-82 has been prepared by subcommittee 48B: Electrical connectors, of IEC t

40、echnical committee 48: Electrical connectors and mechanical structures for electrical and electronic equipment. The text of this standard is based on the following documents: FDIS Report on voting 48B/2497/FDIS 48B/2510/RVD Full information on the voting for the approval of this standard can be foun

41、d in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 60603-7-82:2016 IEC 2016 5 A list of all parts of the IEC 60603 series, under the general title Connectors for electronic equipment, can be found on the IE

42、C website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced

43、 by a revised edition, or amended. 6 IEC 60603-7-82:2016 IEC 2016 INTRODUCTION IEC 60603-7 is the base specification of the whole series. Subsequent specifications do not duplicate information given in the base document, but list only additional requirements. For complete specification regarding a c

44、omponent of a higher number document all lower numbered documents shall be considered as well. The following diagram (Figure 1) shows the interrelation of the documents: Key Indicates reference for dimensions, mechanical and electrical characteristics, tests and test schedules Indicates reference fo

45、r transmission performance (backward compatibility) Figure 1 Diagram of the interrelation of the documents Unshielded (8 way) Shielded (8 way) (8 way, 12 contacts) 3 MHz 100 MHz 250 MHz 600 MHz IEC 60603-7 IEC 60603-7-1 IEC 60603-7-3 IEC 60603-7-4 IEC 60603-7-5 IEC 60603-7-7 500 MHz IEC 60603-7-41 I

46、EC 60603-7-51 1 000 MHz IEC 60603-7-81 IEC 60603-7-2 2 000 MHz IEC 60603-7-71 IEC 60603-7-82 2 000 MHz IEC IEC 60603-7-82:2016 IEC 2016 7 CONNECTORS FOR ELECTRONIC EQUIPMENT Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with freque

47、ncies up to 2 000 MHz 1 Scope This part of IEC 60603 covers 8-way, 12 contacts, shielded, free and fixed connectors, references dimensional, mechanical, electrical and environmental characteristics and tests in IEC 60603-7-7, and specifies electrical transmission requirements, including power sum al

48、ien (exogenous) crosstalk, for frequencies up to 2 000 MHz. These connectors are typically used as “category 8.2” connectors in “class II” cabling systems specified in ISO/IEC TR 11801-9901 and specified in ISO/IEC 11801-1 1 . These connectors are intermateable and interoperable with other IEC 60603

49、-7 series connectors, i.e. as defined in IEC 60603-7-7 and IEC 60603-7-1. These connectors are backward compatible with other IEC 60603-7 series connectors. NOTE Transmission performance categories: in this IEC standard, the term “category”, when used in reference to transmission performance, refers to those categories defined by ISO/IEC 11801-1. 2 Normative references The following documents, in whol