IEC 60721-2-9-2014 Classification of environmental conditions - Part 2-9 Environmental conditions appearing in nature - Measured shock and vibration data - Stor.pdf

1、 IEC 60721-2-9 Edition 1.0 2014-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Classification of environmental conditions Part 2-9: Environmental conditions appearing in nature Measured shock and vibration data Storage, transportation and in-use Classification des conditions denvironnement Partie 2-

2、9: Conditions denvironnement prsentes dans la nature Donnes de chocs et de vibrations mesures Stockage, transport et utilisation IEC 60721-2-9:2014-03(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified,

3、 no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC

4、 copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reprodui

5、te ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits s

6、upplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International

7、Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sur

8、e that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and othe

9、r documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn

10、publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic

11、and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology e

12、ntries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on thi

13、s publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique

14、 et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonom

15、e pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet

16、de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Ju

17、st Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi

18、 que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des

19、publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60

20、721-2-9 Edition 1.0 2014-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Classification of environmental conditions Part 2-9: Environmental conditions appearing in nature Measured shock and vibration data Storage, transportation and in-use Classification des conditions denvironnement Partie 2-9: Cond

21、itions denvironnement prsentes dans la nature Donnes de chocs et de vibrations mesures Stockage, transport et utilisation INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE R ICS 19.040 PRICE CODE CODE PRIX ISBN 978-2-8322-1446-6 Registered trademark of the Internat

22、ional Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 6

23、0721-2-9:2014 IEC 2014 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope and object . 6 2 Normative references 6 3 General . 6 3.1 Introductory remarks 6 3.2 Storage 7 3.3 Transportation . 7 3.3.1 Road 7 3.3.2 Rail . 7 3.3.3 Air 8 3.3.4 Sea . 8 3.4 In-use 8 4 Shock and vibration data . 9 5 Description

24、of the methods 9 5.1 General 9 5.2 ASD envelope method . 9 5.3 Normal tolerance limit method 10 5.4 Product axis . 11 5.4.1 Known axis . 11 5.4.2 Unknown axis . 12 5.5 Factoring for variables and unknowns 12 Annex A (informative) Worked example . 13 A.1 Envelope curve 13 A.2 NTL curve calculation 13

25、 A.3 Processing of the envelope curve and NTL curve . 13 Annex B (informative) Method to smooth and envelop an environmental description spectrum . 15 B.1 Original data 15 B.2 Octave averaging . 15 B.3 Averaging method 15 B.4 Standard slope curves . 16 B.5 Comparison of envelope and NTL curves . 17

26、Bibliography 19 Figure A.1 Comparison of curves 1 to 5 and the envelope curve 7 and 95/50 NTL curve 6 . 14 Figure B.1 95/50 NTL envelope of data 15 Figure B.2 95/50 NTL envelope of data 16 Figure B.3 1/3 octave averaged with standard slopes 17 Figure B.4 Comparison of curves with increasing normal t

27、olerance factors C . 18 Table 1 Normal tolerance factors, C . 11 Table A.1 Example of five hypothetical curves for random vibration . 13 Table A.2 Calculation for the five hypothetical curves 14 IEC 60721-2-9:2014 IEC 2014 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CLASSIFICATION OF ENVIRONMENTAL

28、 CONDITIONS Part 2-9: Environmental conditions appearing in nature Measured shock and vibration data Storage, transportation and in-use FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees

29、IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Repor

30、ts, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and no

31、n- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements

32、of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are

33、 accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote inter

34、national uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in t

35、he latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All user

36、s should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or othe

37、r damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. U

38、se of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent

39、 rights. International Standard IEC 60721-2-9 has been prepared by IEC technical committee 104: Classification of environmental conditions. The text of this standard is based on the following documents: FDIS Report on voting 104/630/FDIS 104/632/RVD Full information on the voting for the approval of

40、 this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 IEC 60721-2-9:2014 IEC 2014 A list of all parts in the IEC 60721 series, published under the general title Classification of enviro

41、nmental conditions, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publicati

42、on will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this d

43、ocument using a colour printer. IEC 60721-2-9:2014 IEC 2014 5 INTRODUCTION This part of IEC 60721 is intended as part of the strategy for defining an environmental description from measured data acquired at multiple locations whilst a product is either in storage, being transported or in-use at weat

44、her or non-weather protected locations. This measured data is normally in the form of acceleration versus time records. This, in turn, will then allow appropriate severities to be chosen from the IEC 60068-2 series 11of shock and vibration test methods. Environmental levels given in IEC 60721-3 2 sh

45、ould then be applied, having been updated based upon the strategy described in this standard. More detailed information may be obtained from specialist documentation, some of which is given in the bibliography. _ 1Numbers in square brackets refer to the Bibliography. 6 IEC 60721-2-9:2014 IEC 2014 CL

46、ASSIFICATION OF ENVIRONMENTAL CONDITIONS Part 2-9: Environmental conditions appearing in nature Measured shock and vibration data Storage, transportation and in-use 1 Scope and object This part of IEC 60721 is intended to be used to define the strategy for arriving at an environmental description fr

47、om measured data when related to a products life cycle. Its object is to define fundamental properties and quantities for characterization of storage, transportation and in-use shock and vibration data as background material for the severities to which products are liable to be exposed during those

48、phases of their lifecycle. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced do

49、cument (including any amendments) applies. None. 3 General 3.1 Introductory remarks Shock and vibrations measured in storage, transportation platforms and in-use locations can vary considerably from a basic sinusoidal character to pure random, which itself may or may not be normally distributed. If it is the latter, it can be reasonably assumed that the process is a sum of nor