IEC 60728-7-1-2003 Cable networks for television signals sound signals and interactive services - Part 7-1 Hybrid Fibre Coax Outside Plant Status Monitoring Phy.pdf

1、INTERNATIONALSTANDARDIEC60728-7-1First edition2003-10Cable networks for television signals,sound signals and interactive services Part 7-1:Hybrid Fibre Coax Outside PlantStatus Monitoring Physical (PHY) Layer SpecificationReference numberIEC 60728-7-1:2003(E)Copyright International Electrotechnical

2、Commission Provided by IHS under license with IECNot for ResaleNo reproduction or networking permitted without license from IHS-,-Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034

3、-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further

4、 information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see be

5、low) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site

6、(www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, wit

7、hdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have a

8、ny questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyright International Electrotechnical Commission Provided by IHS under license with IECNot for ResaleNo reproduction or

9、 networking permitted without license from IHS-,-INTERNATIONALSTANDARDIEC60728-7-1First edition2003-10Cable networks for television signals,sound signals and interactive services Part 7-1:Hybrid Fibre Coax Outside PlantStatus Monitoring Physical (PHY) Layer Specification IEC 2003 Copyright - all rig

10、hts reservedNo part of this publication may be reproduced or utilized in any form or by any means, electronic ormechanical, including photocopying and microfilm, without permission in writing from the publisher.International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 2

11、0, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.chRFor price, see current cataloguePRICE CODECommission Electrotechnique InternationaleInternational Electrotechnical Commission Copyright International Electrotechnical Commission Provided by IHS u

12、nder license with IECNot for ResaleNo reproduction or networking permitted without license from IHS-,- 2 60728-7-1 IEC:2003(E)CONTENTSFOREWORD 3INTRODUCTION 51 Scope 62 Normative references. 73 Terms, definitions and abbreviations 73.10 Abbreviated terms 84 HMS reference architecture forward and ret

13、urn channel specifications. 94.1 HMS specification documents . 94.2 Functional assumptions .105 Physical layer specification.105.1 Separate forward and return channels .105.2 Single forward and return path channels115.3 Byte-based transmission115.4 Byte formats and transmission order115.5 Packet-bas

14、ed transmission 115.6 Duplex operation .115.7 Forward and return channel specifications.115.8 Media access control layer interface185.9 RF cut-off 18Bibliography19Figure 1 HMS Reference architecture diagram 9Figure 2 Bit transmission order.11Table 1 Transponder type classifications. 6Table 2 HMS doc

15、ument family. 9Table 3 Spectral limits by geographical area 10Table 4 HMS PHY channel RF and modulation specifications.12Copyright International Electrotechnical Commission Provided by IHS under license with IECNot for ResaleNo reproduction or networking permitted without license from IHS-,-60728-7-

16、1 IEC:2003(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION_CABLE NETWORKS FOR TELEVISION SIGNALS,SOUND SIGNALS AND INTERACTIVE SERVICES Part 7-1: Hybrid Fibre Coax Outside Plant status monitoring Physical (PHY) layer specificationFOREWORD1) The International Electrotechnical Commission (IEC) is a wor

17、ldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other act

18、ivities, IEC publishes International Standards, Technical Specifications,Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IECPublication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interestedin the subject d

19、ealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closelywith the International Organization for Standardization (ISO) in accordance with conditions determine

20、d byagreement between the two organizations.2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an internationalconsensus of opinion on the relevant subjects since each technical committee has representation from allinterested IEC National Committees.3)

21、IEC Publications have the form of recommendations for international use and are accepted by IEC NationalCommittees in that sense. While all reasonable efforts are made to ensure that the technical content of IECPublications is accurate, IEC cannot be held responsible for the way in which they are us

22、ed or for anymisinterpretation by any end user.4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publicationstransparently to the maximum extent possible in their national and regional publications. Any divergencebetween any IEC Publication and the corre

23、sponding national or regional publication shall be clearly indicated inthe latter.5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with an IEC Publication.6) All users should ensure that they have the lates

24、t edition of this publication.7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts andmembers of its technical committees and IEC National Committees for any personal injury, property damage orother damage of any nature whatsoever, whether

25、direct or indirect, or for costs (including legal fees) andexpenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IECPublications.8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications isindispensa

26、ble for the correct application of this publication.9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject ofpatent rights. IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 60728-7-1 has

27、been prepared by technical area 5: Cable networksfor television signals, sound signals and interactive services, of IEC technical committee 100:Audio, video and multimedia systems and equipment.This standard was submitted to the national committees for voting under the Fast TrackProcedure as the fol

28、lowing documents:CDV Report on voting100/576/CDV 100/683/RVCFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.Copyright International El

29、ectrotechnical Commission Provided by IHS under license with IECNot for ResaleNo reproduction or networking permitted without license from IHS-,- 4 60728-7-1 IEC:2003(E)The committee has decided that the contents of this publication will remain unchanged until2006. At this date, the publication will

30、 be reconfirmed; withdrawn; replaced by a revised edition, or amended.The following differences exist in some countries:The Japanese de facto standard (NCTEA S-006) concerning requirements for the HFCoutside plant management, which was published in 1995, has already been available inJapan. The purpo

31、se of this standard is to support the design and implementation ofinteroperable management systems for HFC cable networks used in Japan. (see Table 4)Copyright International Electrotechnical Commission Provided by IHS under license with IECNot for ResaleNo reproduction or networking permitted withou

32、t license from IHS-,-60728-7-1 IEC:2003(E) 5 INTRODUCTIONStandards of the IEC 60728 series deal with cable networks for television signals, soundsignals and interactive services including equipment, systems and installations for head-end reception, processing and distribution of television and sound

33、 signals and theirassociated data signals, and processing, interfacing and transmitting all kinds of signals for interactive servicesusing all applicable transmission media.All kinds of networks like CATV-networks, MATV-networks and SMATV-networks, individual receiving networksand all kinds of equip

34、ment, systems and installations installed in such networks, are withinthis scope.The extent of this standardization work is from the antennas, special signal source inputs tothe head-end or other interface points to the network up to the system outlet or the terminalinput, where no system outlet exi

35、sts.The standardization of any user terminals (i.e. tuners, receivers, decoders, multimediaterminals, etc.) as well as of any coaxial and optical cables and accessories therefore isexcluded.Copyright International Electrotechnical Commission Provided by IHS under license with IECNot for ResaleNo rep

36、roduction or networking permitted without license from IHS-,- 6 60728-7-1 IEC:2003(E)CABLE NETWORKS FOR TELEVISION SIGNALS,SOUND SIGNALS AND INTERACTIVE SERVICES Part 7-1: Hybrid Fibre Coax Outside Plant status monitoring Physical (PHY) layer specification1 ScopeThis part of IEC 60728 specifies requ

37、irements for The Hybrid Fibre Coax (HFC) Outside Plant(OSP) Physical (PHY) Layer Specification and is part of the series of specifications developedby the Hybrid Management Sub-Layer (HMS) subcommittee under the SCTE. The purpose ofthe HMS specification is to support the design and implementation of

38、 interoperablemanagement systems for evolving HFC cable networks. The HMS Physical (PHY) LayerSpecification describes the physical layer portion of the protocol stack used forcommunication between HMS-compliant transponders interfacing to managed outside plantnetwork elements (NE) and a centralized

39、head-end element (HE).This standard describes the PHY layer requirements that must be implemented by all Type 2and Type 3 compliant OSP HMS transponders on the HFC plant and the controlling equipmentin the head-end. Any exceptions to compliance with this standard will be specifically notedherein as

40、necessary. Refer to Table 1 for a full definition of the type classifications.Electromagnetic Compatibility (EMC) is not specified in this standard and is left to the vendorto ensure compliance with local EMC regulatory requirements. Other than operatingtemperature, physical parameters such as shock

41、, vibration, humidity, etc., are also notspecified and left to the vendors discretion.Transponder type classifications referenced within the HMS series of standards are defined inTable 1.Table 1 Transponder type classificationsType Description ApplicationType 0Refers to legacy transponderequipment,

42、which is incapable ofsupporting the HMS specificationsThis transponder interfaces with legacy network equipmentthrough proprietary means.This transponder could be managed through the samemanagement applications as the other types through proxiesor other means at the head-endType 1Refers to stand-alo

43、ne transponderequipment (legacy or new) which canbe upgraded to support the HMSspecificationsThis transponder interfaces with legacy network equipmentthrough proprietary means.Type 1 is a standards-compliant transponder (eithermanufactured to the standard or upgraded) that connects tolegacy network

44、equipment via a proprietary interfaceType 2Refers to a stand-alone, HMS-compliant transponderThis transponder interfaces with network equipment designedto support the electrical and physical specifications defined inthe HMS standards.It can be factory or field-installed.Its RF connection is independ

45、ent of the monitored NEType 3Refers to a stand-alone or embedded,HMS-compliant transponderThis transponder interfaces with network equipment designedto support the electrical specifications defined in the HMSstandards.It may or may not support the physical specifications definedin the HMS standards.

46、It can be factory-installed. It may or may not be field-installed.Its RF connection is through the monitored NECopyright International Electrotechnical Commission Provided by IHS under license with IECNot for ResaleNo reproduction or networking permitted without license from IHS-,-60728-7-1 IEC:2003

47、(E) 7 2 Normative referencesNone.3 Terms, definitions and abbreviationsFor the purposes of this document, the following terms and definitions apply.3.1 forward spectrumthe pass-band of frequencies in HFC cable systems with a lower edge of between 48 MHzand 87,5 MHz, depending on the particular geogr

48、aphical area, and an upper edge that istypically in the range of 300 MHz to 860 MHz depending on implementation3.2 full spectrumcombined forward and return spectrums in HFC cable systems and excludes any guard band3.3 guard bandunused frequency band between the upper edge of the usable return spectrum and the loweredge of the usable forward spectrum in HFC cable systems3.4 network element (NE)active element in the outside plant that is capable of receiving commands from a head-endelement (HE) in the head-end and, as necessary, providing status information and alarmsback to the HE3.