IEC 60730-2-17 Edition 1.2-2007 Automatic electrical controls for household and similar use - Part 2-17 Particular requirements for electrically operated gas va.pdf

1、 IEC 60730-2-17Edition 1.2 2007-11INTERNATIONAL STANDARD NORME INTERNATIONALEAutomatic electrical controls for household and similar use Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements Dispositifs de commande lectrique automatiques usage dom

2、estique et analogue Partie 2-17: Rgles particulires pour les lectrovannes de gaz, y compris les prescriptions mcaniques IEC60730-2-17:1997+A1:2000+A2:2007 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this

3、publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or hav

4、e an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sou

5、s quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentair

6、es sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the

7、 leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a co

8、rrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications.

9、 IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electric

10、al terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publ

11、ication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes in

12、ternationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t

13、 publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires

14、ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en

15、ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/cu

16、stserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60730-2-17Edition 1.2 2007-11INTERNATIONAL STANDARD NORME

17、 INTERNATIONALEAutomatic electrical controls for household and similar use Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements Dispositifs de commande lectrique automatiques usage domestique et analogue Partie 2-17: Rgles particulires pour les l

18、ectrovannes de gaz, y compris les prescriptions mcaniques INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE CGICS 97.120 PRICE CODECODE PRIXISBN 2-8318-9327-5 2 60730-2-17 IEC:1997+A1:2000 +A2:2007 CONTENTS FOREWORD.3 1 Scope and normative references.5 2 Definition

19、s 7 3 General requirements .9 4 General notes on tests9 5 Rating.10 6 Classification 10 7 Information .12 8 Protection against electric shock.14 9 Provision for protective earthing14 10 Terminals and terminations.14 11 Constructional requirements .14 12 Moisture and dust resistance 20 13 Electric st

20、rength and insulation resistance.20 14 Heating.21 15 Manufacturing deviation and drift 21 16 Environmental stress 22 17 Endurance 22 18 Mechanical strength24 19 Threaded parts and connections .24 20 Creepage distances, clearances and distances through solid insulation.25 21 Resistance to heat, fire

21、and tracking .25 22 Resistance to corrosion 25 23 Electromagnetic compatibility (EMC) requirements emission 25 24 Components .25 25 Normal operation 25 26 Electromagnetic compatibility (EMC) requirements immunity 25 27 Abnormal operation.25 28 Guidance on the use of electronic disconnection .27 Anne

22、xes29 Annex H (normative) Requirements for electronic controls.29 Figures .28 Table 27.2.101 Maximum winding temperature (for test of blocked output conditions and valves declared under table 7.2, item 110)26 60730-2-17 IEC:1997+A1:2000 3 +A2:2007 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ AUTOMATI

23、C ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national elect

24、rotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specific

25、ations, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internation

26、al, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal de

27、cisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for int

28、ernational use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In

29、order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be

30、clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability

31、shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including

32、legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this

33、publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60730-2-17 has been prepared by IEC technical commi

34、ttee 72: Automatic controls for household use. This consolidated version of IEC 60730-2-17 consists of the first edition (1997) documents 72/348/FDIS and 72/371/RVD, its amendment 1 (2000) documents 72/466/FDIS and 72/490/RVD and its amendment 2 (2007) documents 72/744/FDIS and 72/749/RVD. The techn

35、ical content is therefore identical to the base edition and its amendments and has been prepared for user convenience. It bears the edition number 1.2. A vertical line in the margin shows where the base publication has been modified by amendments 1 and 2. 4 60730-2-17 IEC:1997+A1:2000 +A2:2007 This

36、Part 2-17 is intended to be used in conjunction with IEC 60730-1. It was established on the basis of the third edition of that standard (1999) and its amendment 1 (2003). Consideration may be given to future editions of, or amendments to IEC 60730-1. Where this part 2 states “addition“, “modificatio

37、n“ or “replacement“, the relevant requirement, test specification or explanatory matter in part 1 should be adapted accordingly. Where no change is necessary, part 2 indicates that the relevant clause or subclause applies. In the development of a fully international standard it has been necessary to

38、 take into consideration the differing requirements resulting from practical experience in various parts of the world and to recognize the variation in national electrical systems and wiring rules. The “in some countries” notes regarding differing national practice are contained in the following sub

39、clauses: 6.11.101 6.103 6.104 Table 7.2, requirements 117 and 118 Table 7.2, notes 103 and 104 11.102 11.103 11.104.3 11.104.5 11.104.11 11.104.14 11.105.1 11.105.2 11.105.3 11.105.6 11.106.1 11.115 17.16.101 18.102 18.103 27.2.101.1 In this publication: 1) The following print types are used: Requir

40、ements proper: in roman type; Test specifications: in italic type; Explanatory matter: in smaller roman type. 2) Subclauses, notes or requirements which are additional to those in part 1 are numbered starting from 101. The committee has decided that the contents of the base publication and its amend

41、ments will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60730-2-17 IEC:1997+A1:2

42、000 5 +A2:2007 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements 1 Scope and normative references This clause of part 1 is replaced as follows: Replacement: 1.1 This part 2 of IEC 607

43、30 applies to electrically operated gas valves for use in, on or in association with, equipment for household and similar use that use electricity, in combination with fuel in the gaseous state such as manufactured gas, natural gas or liquefied petroleum gas intended to be used for gas burning equip

44、ment. Additional considerations may be necessary for gas with corrosive properties. This part 2 also applies to electrically operated gas valves using NTC or PTC thermistors, requirements for which are contained in annex J. 1.1.1 This standard applies to the inherent safety, to the operating values,

45、 operating times, and operating sequences where such are associated with equipment safety, and to the testing of electrically operated gas valves used in, or in association with, household or similar equipment, but also extended to industrial purposes when no dedicated product standard exists, such

46、as that for central heating, air conditioning, process heating, etc. This part 2 is also applicable to controls for appliances within the scope of IEC 60335-1. Throughout this part 2 the word “equipment“ means “appliance and equipment“. This part 2 does not apply to electrically operated gas valves

47、designed exclusively for industrial applications. Electrically operated gas valves for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of

48、this part 2. This part 2 identifies a number of mechanical features as “under consideration“. Until these mechanical requirements are incorporated in this part 2, each country using this part 2 will have to quantify these requirements. Compliance of an electrically operated gas valve with this part

49、2 does not imply that the valve is acceptable without further tests for these mechanical features. 1.1.2 This part 2 applies to manual controls when such are electrically and/or mechanically integral with electrically operated gas valves. Requirements for manual switches not forming part of an electrically operated gas valve are contained in IEC 61058-1. 6 60730-2-17 IEC