IEC 60794-2-11-2012 Optical fibre cables - Part 2-11 Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabl.pdf

1、 IEC 60794-2-11 Edition 2.0 2012-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Optical fibre cables Part 2-11: Indoor optical fibre cables Detailed specification for simplex and duplex cables for use in premises cabling Cbles fibres optiques Partie 2-11: Cbles fibres optiques intrieurs Spcification

2、 particulire pour les cbles simplex et duplex utiliss dans le cblage de locaux IEC 60794-2-11:2012 colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized

3、in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional ri

4、ghts to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun p

5、rocd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coo

6、rdonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading gl

7、obal organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or

8、 an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn public

9、ations. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and e

10、lectrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on thi

11、s publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectroniq

12、ue et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec

13、.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez

14、 inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus d

15、e 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication

16、ou si vous avez des questions contactez-nous: csciec.ch. IEC 60794-2-11 Edition 2.0 2012-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Optical fibre cables Part 2-11: Indoor optical fibre cables Detailed specification for simplex and duplex cables for use in premises cabling Cbles fibres optiques P

17、artie 2-11: Cbles fibres optiques intrieurs Spcification particulire pour les cbles simplex et duplex utiliss dans le cblage de locaux INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE H ICS 33.180.10 PRICE CODE CODE PRIX ISBN 978-2-83220-088-9 Registered trademark

18、 of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colou

19、r inside 2 60794-2-11 IEC:2012 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative References 5 3 General requirements . 5 4 Particular requirements 6 4.1 Environmental requirements Temperature cycling 6 4.2 Transmission requirements . 6 4.2.1 Attenuation of cabled fibre . 6 4.2.2 Fibre bandwidth requirem

20、ents 7 Bibliography 8 Table 1 Multimode maximum cable attenuation coefficient (dB/km) 6 Table 2 Single-mode maximum cable attenuation coefficient (dB/km) 7 Table 3 Minimum multimode fibre bandwidth (MHz km) . 7 60794-2-11 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRE CABLES Pa

21、rt 2-11: Indoor optical fibre cables Detailed specification for simplex and duplex cables for use in premises cabling FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Comm

22、ittees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Avail

23、able Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental or

24、ganizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technica

25、l matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC N

26、ational Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformit

27、y, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC

28、itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure th

29、at they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any na

30、ture whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenc

31、ed publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Internati

32、onal Standard IEC 60794-2-11 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. This second edition cancels and replaces the first edition published in 2005. It constitutes a technical revision. The main changes are listed below: Incorporation of t

33、he OM4 cabled fiber performance category Incorporation of the OS2 cabled fiber performance category Incorporation of the B6_a1 and B6_a2 fibre category as per IEC 60793-2-50:2008 4 60794-2-11 IEC:2012 The text of this standard is based on the following documents: FDIS Report on voting 86A/1440/FDIS

34、86A/1449/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will r

35、emain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover

36、 page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 60794-2-11 IEC:2012 5 OPTICAL FIBRE CABLES Part 2-11: Indoor optical fibre cables Detailed

37、specification for simplex and duplex cables for use in premises cabling 1 Scope This International Standard presents the detailed requirements specific to this type of cable to ensure compatibility with ISO/IEC 11801, Information technology Generic cabling for customer premises. The requirements of

38、the Family Specification IEC 60794-2-10:2011 are applicable to cables covered by this standard. Particular requirements detailed in clause 4 either define a specific option relative to the requirements of IEC 60794-2-10:2011 or define additional requirements. 2 Normative References The following doc

39、uments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. They complete the normat

40、ive references already listed in the generic specification (IEC 60794-1-1:2011, and IEC 60794-1-2:2003,) and in the sectional specification (IEC 60794-2:2002, Clause 2) or in the family specification (IEC 60794-2-10:2011, Clause 2). IEC 60793-2-10:2007, Optical fibres Part 2-10: Product specificatio

41、ns Sectional specification for category A1 multimode fibres IEC 60793-2-50:2008, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 60794-1-1:2011, Optical Fibre cables Part 1-1: Generic specification General IEC 60794-1-2:2003, Optical fibre

42、cables Part 1-2: Generic specification Basic optical cable test procedures IEC 60794-2:2002, Optical fibre cables Part 2: Indoor cables Sectional specification IEC 60794-2-10:2011, Optical fibre cables Part 2-10: Indoor cables Family Specification for simplex and duplex cables 3 General requirements

43、 The cable shall comply with the family specification (IEC 60794-2-10:2011) and meet the requirements that are defined in it. The optical fibre contained in the cables which are covered by this standard shall comply with one of the following standards and meet the normative requirements defined with

44、in them as applicable: 6 60794-2-11 IEC:2012 IEC 60793-2-50:2008, Annex A Single-mode B1.1 fibre IEC 60793-2-50:2008, Annex C Single-mode B1.3 fibre IEC 60793-2-50:2008, Annex G Single-mode B6_a1 and B6_a2 fibre IEC 60793-2-10:2007, Annex A Multimode A1a.1, 50 m core fibre IEC 60793-2-10:2007, Annex

45、 A Multimode A1a.2, 50 m core fibre IEC 60793-2-10:2007, Annex A Multimode A1a.3, 50 m core fibre IEC 60793-2-10:2007, Annex B Multimode A1b, 62.5 m core fibre To ensure compatibility with ISO/IEC 11801, optical performance level requirements are presented in terms of the performance classification

46、codes for cabled optical fibre as follows: OS1 Single-mode fibre, B1.1, B1.3 category or sub-category B6_a1 and B6_a2; OS2 Single-mode fibre, B1.3 or sub-category B6_a1 and B6_a2; OM1 Multimode fibre, Model A1a.1 or sub-category A1b; OM2 Multimode fibre, Model A1a.1 or sub-category A1b; OM3 Multimod

47、e fibre, Model A1a.2; OM4 Multimode fibre, Model A1a.3; NOTE These codes are informative from the perspective of the requirements defined in this detailed specification. 4 Particular requirements 4.1 Environmental requirements Temperature cycling The cable shall meet the requirement of IEC 60794-2-1

48、0:2011, 5.4.1, option c (20 C to +60 C). The test shall be performed on a 50 m specimen. No attenuation changes (according to IEC 60794-1-1:2011, B.3) shall be allowed during the test 4.2 Transmission requirements 4.2.1 Attenuation of cabled fibre Depending on the fibre category, the attenuation coe

49、fficient of the cabled fibre shall be less than the maximum values in Table 1 for the multimode fibres and less than the maximum values in Table 2 for single-mode fibres for the wavelengths listed in Table 2. The fibre category shall be agreed between customer and supplier. Table 1 Multimode maximum cable attenuation coeffici