IEC 60966-2-6-2016 Radio frequency and coaxial cable assemblies - Part 2-6 Detail specification for cable assemblies for radio and TV receivers - Frequency rang.pdf

1、 IEC 60966-2-6 Edition 4.0 2016-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio frequency and coaxial cable assemblies Part 2-6: Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors Cordons coaxiaux et cordons pour frqu

2、ences radiolectriques Partie 2-6: Spcification particulire pour cordons de connexion de rcepteurs radio ou TV Plage de frquences de 0 MHz 3 000 MHz, connecteurs IEC 61169-24 IEC 60966-2-6:2016-10(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All

3、 rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the r

4、equester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune par

5、tie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright d

6、e lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerlan

7、d www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept unde

8、r constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technic

9、al Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives inf

10、ormation on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The wo

11、rlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 elect

12、rotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to giv

13、e us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait

14、 llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/cata

15、logue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La

16、 recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouve

17、lles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et

18、en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinit

19、ions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.c

20、h. IEC 60966-2-6 Edition 4.0 2016-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio frequency and coaxial cable assemblies Part 2-6: Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors Cordons coaxiaux et cordons pour fr

21、quences radiolectriques Partie 2-6: Spcification particulire pour cordons de connexion de rcepteurs radio ou TV Plage de frquences de 0 MHz 3 000 MHz, connecteurs IEC 61169-24 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 33.120.10 ISBN 978-2-8322-3705-2 Re

22、gistered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distr

23、ibuteur agr. colour inside 2 IEC 60966-2-6:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 IEC 60966-2-6:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES Part 2-6: Detail specification for cable assemblies for radio and TV receivers Freque

24、ncy range 0 MHz to 3 000 MHz, IEC 61169-24 connectors FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operat

25、ion on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “

26、IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this prepa

27、ration. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international conse

28、nsus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts a

29、re made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications t

30、ransparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independe

31、nt certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liabi

32、lity shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (inclu

33、ding legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of

34、this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60966-2-6 has been prepared by IEC technical c

35、ommittee 46: Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories. This fourth edition cancels and replaces the third edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes w

36、ith respect to the previous edition: a) the return loss requirements and the insertion loss requirements are matched to the relevant cables, b) screening effectiveness shall be measured according to IEC 62153-4-7, triaxial method, c) screening class A+ was introduced. 4 IEC 60966-2-6:2016 IEC 2016 T

37、he text of this standard is based on the following documents: FDIS Report on voting 46/593/FDIS 46/626/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/

38、IEC Directives, Part 2. This detail specification is to be read with IEC 60966-1:1999, with IEC 60966-2-1:2008 and with IEC 60966-2-2:2003. A list of all parts of the IEC 60966 series, under the general title: Radio frequency and coaxial cable assemblies, can be found on the IEC website. The committ

39、ee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition,

40、 or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. IEC 60966-2-6:2016 IEC 2016 5 INT

41、RODUCTION This part of IEC 60966 is a detail specification which applies to coaxial cables described in the IEC 61196 series. It relates to cable assemblies for radio and TV receivers, and in particular to the cable assemblies subfamily F (see IEC 61169-24). These cable assemblies are used as descri

42、bed in IEC 60728-4. This part of IEC 60966 gives subfamily requirements and severities which shall be applied. Under qualification approval, the qualification will be conducted in accordance with 12.2 of IEC 60966-2-1:2008 taking into account the specified variants. Only the tests whose results migh

43、t depend on the variants will be repeated Under capability approval, the qualification will be conducted on the relating CQCs (capability qualifying components) as defined in 12.3 of IEC 60966-2-1:2008 and described in the CM (capability manual). Unless otherwise specified in the CM, only lot-by-lot

44、 tests from groups Ba and Eb will be conducted on delivered products, all other tests will be performed on CQCs as defined in 12.3 of IEC 60966-2-1:2008 and described in the CM. Reference documents IEC 60728-4, Cable networks for television signals, sound signals and interactive services Part 4: Pas

45、sive wideband equipment for coaxial cable networks IEC 60966-1:1999, Radio frequency and coaxial cable assemblies Part 1: Generic specification General requirements and test methods IEC 60966-2-1:2008, Radio frequency and coaxial cable assemblies Part 2-1: Sectional specification for flexible coaxia

46、l cable assemblies IEC 60966-2-2:2003, Radio frequency and coaxial cable assemblies Part 2-2: Blank detail specification for flexible coaxial cable assemblies IEC 61169-24, Radio-frequency connectors Part 24: Sectional specification Radio frequency coaxial connectors with screw coupling, typically f

47、or use in 75 ohm cable networks (type F) IEC 61196-1-110, Coaxial communication cables Part 1-110: Electrical test methods Test for continuity IEC 61196-6, Coaxial communication cables Part 6:Sectional specification for CATV drop cables IEC 62153-4-7, Metallic communication cable test methods Part 4

48、-7: Electromagnetic compatibility (EMC) Test method for measuring the transfer impedance Z Tand screening attenuation a S or coupling attenuation a Cof connectors and assemblies up to and above 3 GHz Triaxial tube in tube method 6 IEC 60966-2-6:2016 IEC 2016 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBL

49、IES Part 2-6: Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors 1 Prepared by IEC TC 46 2 Document No. 60966-2-6 Issue: Fourth issue Date: 3 Available from: IEC 3 rue de Varemb Geneva Switzerland 4 Generic specification: IEC 60966-1 Sectional specification: IEC 60966-2-1 Blank detail specification: IE