IEC 61000-6-1-2016 Electromagnetic compatibility (EMC) - Part 6-1 Generic standards - Immunity standard for residential commercial and light-industrial environm.pdf

1、 IEC 61000-6-1 Edition 3.0 2016-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Electromagnetic compatibility (EMC) Part 6-1: Generic standards Immunity standard for residential, commercial and light-industrial environments Compatibilit lectromagntique (CEM) Partie 6-1: Normes gnriques Norme dimmunit

2、 pour les environnements rsidentiels, commerciaux et de lindustrie lgre IEC 61000-6-1:2016-08(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

3、or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this

4、 publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectro

5、nique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou

6、 contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization th

7、at prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might

8、have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC pu

9、blications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay u

10、p to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English

11、 and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publica

12、tions issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: cscie

13、c.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des pub

14、lications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, S

15、pcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, co

16、mit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fo

17、is par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechn

18、ique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37,

19、 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61000-6-1 Edition 3.0 2016-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Electromagnetic compatibility (EMC)

20、 Part 6-1: Generic standards Immunity standard for residential, commercial and light-industrial environments Compatibilit lectromagntique (CEM) Partie 6-1: Normes gnriques Norme dimmunit pour les environnements rsidentiels, commerciaux et de lindustrie lgre INTERNATIONAL ELECTROTECHNICAL COMMISSION

21、COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 33.100.20 ISBN 978-2-8322-3567-6 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. At

22、tention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 61000-6-1:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references. 6 3 Terms and definitions 7 4 Performance criteria 9 5 Conditions during testing . 10 6 Product docume

23、ntation 10 7 Applicability . 10 8 Measurement uncertainty . 11 9 Immunity test requirements 11 Annex A (informative) Guidance for product committees . 16 Bibliography . 18 Figure 1 Equipment ports . 8 Table 1 Immunity requirements Enclosure port 12 Table 2 Immunity requirements Signal/control ports

24、. 13 Table 3 Immunity requirements Input and output DC power ports . 14 Table 4 Immunity requirements Input and output AC power ports . 15 Table A.1 Immunity tests and test levels to be considered in future or for particular product families 17 IEC 61000-6-1:2016 IEC 2016 3 INTERNATIONAL ELECTROTECH

25、NICAL COMMISSION _ ELECTROMAGNETIC COMPATIBILITY (EMC) Part 6-1: Generic standards Immunity standard for residential, commercial and light-industrial environments FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national e

26、lectrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Spec

27、ifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Interna

28、tional, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The form

29、al decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations fo

30、r international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4

31、) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shal

32、l be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certif

33、ication bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal inju

34、ry, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references c

35、ited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identif

36、ying any or all such patent rights. International Standard IEC 61000-6-1 has been prepared by IEC technical committee 77: Electromagnetic compatibility. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes

37、the following significant technical changes with respect to the previous edition: a) improvement of the environmental description; b) extension of the frequency range for the radio-frequency electromagnetic field test according to IEC 61000-4-3; 4 IEC 61000-6-1:2016 IEC 2016 c) amended test levels a

38、t particular frequencies for the radio-frequency electromagnetic field test according to IEC 61000-4-3; d) change of the repetition frequency for the fast transients immunity test according to IEC 61000-4-4; e) introduction of requirements according to IEC 61000-4-34; f) revision of the test levels;

39、 g) consideration of measurement uncertainty; h) addition of Annex A. The text of this standard is based on the following documents: FDIS Report on voting 77/520/FDIS 77/522/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the abo

40、ve table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61000 series, published under the general title Electromagnetic compatibility (EMC), can be found on the IEC website. The committee has decided that the contents of this publ

41、ication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 61000-6-1:2016 IEC 2016 5 IN

42、TRODUCTION IEC 61000 is published in separate parts according to the following structure: Part 1: General General considerations (introduction, fundamental principles) Definitions, terminology Part 2: Environment Description of the environment Classification of the environment Compatibility levels P

43、art 3: Limits Emission limits Immunity limits (insofar as they do not fall under the responsibility of the product committees) Part 4: Testing and measurement techniques Measurement techniques Testing techniques Part 5: Installation and mitigation guidelines Installation guidelines Mitigation method

44、s and devices Part 6: Generic standards Part 9: Miscellaneous Each part is further subdivided into several parts, published either as International Standards or as Technical Specifications or Technical Reports, some of which have already been published as sections. Others will be published with the

45、part number followed by a dash and a second number identifying the subdivision (example: IEC 61000-6-1). 6 IEC 61000-6-1:2016 IEC 2016 ELECTROMAGNETIC COMPATIBILITY (EMC) Part 6-1: Generic standards Immunity standard for residential, commercial and light-industrial environments 1 Scope This part of

46、IEC 61000 for EMC immunity requirements applies to electrical and electronic equipment intended for use in residential, commercial, public and light-industrial locations. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no r

47、equirements are specified. This generic EMC immunity standard is applicable if no relevant dedicated product or product- family EMC immunity standard exists. This standard applies to electrical and electronic equipment intended to be operated in residential locations, as defined in 3.8, both indoor

48、and outdoor, commercial, public and light industrial locations, as defined in 3.9, both indoor and outdoor. This standard applies also to equipment which is battery operated or is powered by a non- public, but non-industrial, low voltage power distribution system if this equipment is intended to be

49、used in the locations defined in 3.8 or 3.9. This standard defines the immunity test requirements for equipment specified in the scope in relation to continuous and transient, conducted and radiated disturbances, including electrostatic discharges. The immunity requirements have been selected to ensure an adequate level of immunity for equipment operating within residential, commercial,