IEC 61069-8-2016 Industrial-process measurement control and automation - Evaluation of system properties for the purpose of system assessment - Part 8 Assessmen.pdf

1、 IEC 61069-8 Edition 2.0 2016-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system assessment Part 8: Assessment of other system properties Mesure, commande et automation dans les processus ind

2、ustriels Apprciation des proprits dun systme en vue de son valuation Partie 8: valuation des autres proprits dun systme IEC 61069-8:2016-06(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of

3、 this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright

4、or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utili

5、se sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentair

6、es sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotech

7、nical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you

8、have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents

9、. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publication

10、s. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electri

11、cal terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French ex

12、tracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further a

13、ssistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes

14、. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les rense

15、ignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC

16、 en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvel

17、les publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 lang

18、ues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certa

19、ines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61069-8 Edition 2.0 2016-06 INTERNATIONAL STANDAR

20、D NORME INTERNATIONALE Industrial-process measurement, control and automation Evaluation of system properties for the purpose of system assessment Part 8: Assessment of other system properties Mesure, commande et automation dans les processus industriels Apprciation des proprits dun systme en vue de

21、 son valuation Partie 8: valuation des autres proprits dun systme INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 25.040.40 ISBN 978-2-8322-3451-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechn

22、ique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 61069-8:2016 IEC 2016 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 9 2 Norm

23、ative references. 9 3 Terms, definitions, abbreviated terms, acronyms, conventions and symbols 9 3.1 Terms and definitions 9 3.2 Abbreviated terms, acronyms, conventions and symbols 9 4 Basis of assessment specific to other system properties . 9 4.1 Other system properties 9 4.1.1 General . 9 4.1.2

24、Quality assurance 10 4.1.3 System support 11 4.1.4 Compatibility 13 4.1.5 Physical properties . 13 4.2 Factors influencing OSP 13 5 Assessment method 14 5.1 General . 14 5.2 Defining the objective of the assessment . 14 5.3 Design and layout of the assessment . 14 5.4 Planning the assessment program

25、 . 14 5.5 Execution of the assessment . 14 5.6 Reporting of the assessment . 14 6 Evaluation techniques 15 6.1 General . 15 6.2 Analytical evaluation techniques 15 6.2.1 Evaluation of quality assurance 15 6.2.2 Evaluation of systems support 15 6.2.3 Evaluation of compatibility 15 6.2.4 Evaluation of

26、 physical properties 16 6.3 Empirical evaluation techniques. 16 6.3.1 Evaluation of systems support 16 6.3.2 Evaluation of compatibility 16 6.4 Additional topics for evaluation techniques 16 Annex A (informative) Checklist and/or example of SRD for system functionality . 17 A.1 SRD information 17 A.

27、2 System support . 17 A.3 Quality assurance . 17 Annex B (informative) Check list and/or example of SSD for system functionality 18 B.1 SSD information 18 B.2 Check points for other aspects 18 Annex C (informative) Assessment of non-task-related system properties, sample system specification informa

28、tion from IEC TS 62603-1 . 19 C.1 Overview. 19 C.2 Non-task-related system properties . 19 C.2.1 Technical and commercial support 19 IEC 61069-8:2016 IEC 2016 3 C.2.2 Training of the personnel 19 C.2.3 Technical support for operation 19 C.2.4 Warranty 20 C.2.5 References of the vendor . 20 C.3 Syste

29、m support . 21 C.3.1 Automatic documentation . 21 C.3.2 On-line documentation . 21 Annex D (informative) Subjects to be considered on type of training required for the mission . 22 D.1 General . 22 D.2 Enabling factors 22 D.2.1 General . 22 D.2.2 Knowledge . 22 D.2.3 Attitude 23 D.3 Skills . 23 D.3.

30、1 General . 23 D.3.2 Technical skills 23 D.3.3 Skill to make decisions . 24 D.3.4 Skill to communicate effectively 24 D.4 Overview of training items . 24 Annex E (informative) Evaluation indicators to assess quality assurance . 27 E.1 Company 27 E.2 Technologies 28 E.3 Processes . 29 E.4 Products .

31、30 E.5 Deliveries 31 Annex F (informative) Evaluation matrix to assess compatibility 33 Bibliography . 34 Figure 1 General layout of IEC 61069 . 8 Figure 2 Other system properties . 10 Table D.1 Training items 24 Table E.1 Company profile . 27 Table E.2 Management 27 Table E.3 Quality management sys

32、tem (QM) 27 Table E.4 Co-operation and service (overall assessment) . 28 Table E.5 Product strategy . 28 Table E.6 Production . 28 Table E.7 Development 28 Table E.8 Co-operation 29 Table E.9 Process documentation 29 Table E.10 Process control 29 Table E.11 Environmental compatibility 29 Table E.12

33、Co-operation 30 Table E.13 Delivery quality . 30 4 IEC 61069-8:2016 IEC 2016 Table E.14 Reliability . 30 Table E.15 Processing of complaints 30 Table E.16 Co-operation 31 Table E.17 Delivery logistics 31 Table E.18 Transport systems 31 Table E.19 Cost management 32 Table E.20 Co-operation 32 Table F

34、.1 Evaluation matrix to assess compatibility 33 IEC 61069-8:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT Part 8: Assessment of other system properties FOREWORD 1

35、) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrica

36、l and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technica

37、l committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organiza

38、tion for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical co

39、mmittee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications

40、 is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national an

41、d regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services a

42、nd, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants o

43、r agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, us

44、e of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that

45、some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61069-8 has been prepared by subcommittee 65A: System aspects, of IEC technical committee 65: Industrial-proce

46、ss measurement, control and automation. This second edition cancels and replaces the first edition published in 1999. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) reorganization of the materi

47、al of IEC 61069-8:1999 to make the overall set of standards more organized and consistent; b) IEC TS 62603-1 has been incorporated into this edition. 6 IEC 61069-8:2016 IEC 2016 The text of this standard is based on the following documents: FDIS Report on voting 65A/796/FDIS 65A/806/RVD Full informa

48、tion on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61069 series, published under the general title Industrial-proce

49、ss measurement, control and automation Evaluation of system properties for the purpose of system assessment, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date,