IEC 61169-47-2015 Radio-frequency connectors - Part 47 Sectional specification for radio-frequency coaxial connectors with clamp coupling typically for use in 7.pdf

1、 IEC 61169-47 Edition 2.0 2015-03 INTERNATIONAL STANDARD Radio-frequency connectors Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 cable networks (type F-Quick) IEC 61169-47:2015-03(en) colour inside THIS PUBLICATION IS COPYRIGHT

2、PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or I

3、ECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Off

4、ice Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electroni

5、c and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone

6、application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IE

7、C publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publicati

8、ons released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also k

9、nown as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected f

10、rom earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 61169-47 Edition 2.0 2015-03 INTERNATIONAL STANDA

11、RD Radio-frequency connectors Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 cable networks (type F-Quick) INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.120.30 ISBN 978-2-8322-2581-3 Registered trademark of the International El

12、ectrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 61169-47:2015 IEC 2015 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references. 6 3 Interface dimensions 6 3.1 Dimensions . 6 3.1.1 Common dimensions 6 3.1.2 Example of

13、connector “F-Quick” type male plug with resilient outer conductor sleeve (indoor) physical dimensions . 7 3.1.3 Example of connector “F-Quick” type male plug with slotted outer conductor (indoor) physical dimensions 8 3.1.4 Example of connector “F-Quick” type male plug with slotted outer conductor a

14、nd snap ring (indoor) physical dimensions. 8 3.2 Mechanical gauges . 9 4 Quality assessment procedures . 10 4.1 General . 10 4.2 Ratings and characteristics . 10 4.3 Environmental characteristics for outdoor sockets 12 4.4 Test schedule and inspection requirements 12 4.4.1 Acceptance tests 12 4.4.2

15、Periodic tests . 12 4.5 Procedures for the quality conformance . 14 4.5.1 Quality conformance inspection 14 4.5.2 Quality conformanceand its maintenance General procedure 14 5 Instructions for preparation of detail specifications . 14 5.1 General . 14 5.2 Identification of the component 14 5.3 Perfo

16、rmance . 15 5.4 Marking, ordering information and related matters 15 5.5 Selection of tests, test conditions and severities 15 5.6 Blank detail specification pro-forma for type F-QUICK connector 16 6 Marking . 20 6.1 Marking of component . 20 6.2 Marking and contents of package 20 Figure 1 Connector

17、 “F-Quick” type male plug: general dimensions 7 Figure 2 Example of connector “F-Quick” type male plug with resilient outer conductor sleeve (indoor) 8 Figure 3 Example of connector “F-Quick” type male plug with slotted outer conductor (indoor) 8 Figure 4 Example of connector “F-Quick” type male plu

18、g with slotted outer conductor and snap ring (indoor) . 9 Figure 5 Mechanical gauge for resilient outer conductor 9 IEC 61169-47:2015 IEC 2015 3 Table 1 Connector “F” type male plug (indoor) 7 Table 2 Ratings and characteristics 10 Table 3 Acceptance tests . 12 Table 4 Periodic tests 13 4 IEC 61169-

19、47:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 cable networks (type F-Quick) FOREWORD 1) The International Electrotechnical Commission (IEC) i

20、s a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to

21、 other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in

22、the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with condi

23、tions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC Nati

24、onal Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the wa

25、y in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC

26、 Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. I

27、EC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of it

28、s technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any oth

29、er IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the

30、 subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61169-47 has been prepared by subcommittee 46F: R.F. and microwave passive components, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F

31、. and microwave passive components and accessories. This second edition cancels and replaces the first edition published in 2012. It constitutes a technical revision. The main changes are listed below: Subclause 3.2 has been updated to better define gauging. Table 2 has been updated for insertion an

32、d removal forces. Clause 4 has been updated to refer to the new edition of IEC 61169-1. IEC 61169-47:2015 IEC 2015 5 The text of this standard is based on the following documents: CDV Report on voting 46F/272/CDV 46F/306/RVC Full information on the voting for the approval of this standard can be fou

33、nd in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61169 series, under the general title: Radio-frequency connectors, can be found on the IEC website. The committee has decided t

34、hat the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A b

35、ilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document us

36、ing a colour printer. 6 IEC 61169-47:2015 IEC 2015 RADIO-FREQUENCY CONNECTORS Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 cable networks (type F-Quick) 1 Scope This part of IEC 61169, which is a sectional specification (SS), pr

37、ovides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with clamp coupling, typically for use in 75 cable networks (type F-Quick). It describes the interface dimensions with gauging information, electrical and mechanical performance including the man

38、datory tests selected from IEC 61169-1:2013, applicable to all DS relating to type F-Quick connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements. NOTE This interface is typically u

39、sed for indoor connections, which are easily disconnected and reconnected. The typical application is for F-type coaxial receiver leads or F-type coaxial patch cables. The interface may also be known as a Push-on connector. It is preferred to use the fixed (screwed) connectors type F according to IE

40、C 61169-24:2009. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (in

41、cluding any amendments) applies. IEC 61169-1:2013, Radio-frequency connectors Part 1: Generic specification General requirements and measuring methods IEC 61169-24:2009, Radio-frequency connectors Part 24: Sectional specification Radio frequency coaxial connectors with screw coupling, typically for

42、use in 75 cable networks (type F) IEC 62037 (all parts), Passive RF and microwave devices, intermodulation level measurement IEC 62037-3, Passive RF and microwave devices, intermodulation level measurement Part 3: Measurement of passive intermodulation in coaxial connectors 3 Interface dimensions 3.

43、1 Dimensions 3.1.1 Common dimensions Millimetres are original dimensions. All un-dimensioned pictorial configurations are for reference purposes only. Figure 1 and Table 1 depict the dimensions that are common to any F connector and thus indispensable for compatibility. Examples of specific design w

44、ith their dimensions are given in 3.1.2 to 3.1.4. IEC 61169-47:2015 IEC 2015 7 Figure 1 Connector “F-Quick” type male plug: general dimensions Table 1 Connector “F” type male plug (indoor) Description Ref. mm inches Additional notes Min. Max. Min. Max. Inner conductor length A 6,35 8,63 0,250 0,340

45、Length of nut B 4,00 7,29 0,167 0,287 Maximum envelope dimension C 16,61 0,654 Inner conductor diameter D 0,64 1,13 0,025 0,044 Reference plane opening inner diameter F 6,84 0,230 (1) Reference plane outer diameter G 7,11 0,280 (1) No protrusion of the dielectric beyond the reference plane is permit

46、ted. 3.1.2 Example of connector “F-Quick” type male plug with resilient outer conductor sleeve (indoor) physical dimensions The connector is shown in Figure 2. Common dimensions are given in 3.1.1. IEC C D F G B A 0,100 A Note Reference plane 8 IEC 61169-47:2015 IEC 2015 Dimensions in millimetres Fi

47、gure 2 Example of connector “F-Quick” type male plug with resilient outer conductor sleeve (indoor) 3.1.3 Example of connector “F-Quick” type male plug with slotted outer conductor (indoor) physical dimensions The connector is shown in Figure 3. Common dimensions are given in 3.1.1. Dimensions in mi

48、llimetres Figure 3 Example of connector “F-Quick” type male plug with slotted outer conductor (indoor) 3.1.4 Example of connector “F-Quick” type male plug with slotted outer conductor and snap ring (indoor) physical dimensions The connector is shown in Figure 4. Common dimensions are given in 3.1.1.

49、 IEC Cone or radius 7,5 Resilient sleeve 8,55 1 IEC 9,55 Minimum 6 slotted +0,1 0 IEC 61169-47:2015 IEC 2015 9 Dimensions in millimetres Figure 4 Example of connector “F-Quick” type male plug with slotted outer conductor and snap ring (indoor) 3.2 Mechanical gauges Dimensions in millimetres Material: stainless steel, polish, Ra 0,4-0,1 Description Dimension mm inches Outside diameter over thread aA 9,35 0,368 Reference plane outer dia