IEC 61196-8-6-2012 Coaxial communication cables - Part 8-6 Detail specification for 75-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) i.pdf

1、 IEC 61196-8-6 Edition 1.0 2012-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Coaxial communication cables Part 8-6: Detail specification for 75-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation Cbles coaxiaux de communication Partie 8-6: Spcification particulire po

2、ur cbles semi-flexibles de type 75-047 isolation en polyttrafluorothylne (PTFE) compact IEC61196-8-6:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any

3、form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to

4、 this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, l

5、ectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes

6、 ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global or

7、ganization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an ame

8、ndment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications.

9、 IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electric

10、al terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publi

11、cation or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et a

12、ux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/sea

13、rchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform

14、 sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 00

15、0 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si v

16、ous avez des questions contactez-nous: csciec.ch. IEC 61196-8-6 Edition 10 2012-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Coaxial communication cables Part 8-6: Detail specification for 75-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation Cbles coaxiaux de commu

17、nication Partie 8-6: Spcification particulire pour cbles semi-flexibles de type 75-047 isolation en polyttrafluorothylne (PTFE) compact INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE L ICS 33.120.10 PRICE CODE CODE PRIX ISBN 978-2-83220-327-9 Registered trademar

18、k of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61

19、196-8-6 IEC:2012 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Detail specification . 6 Annex A (normative) Power rating 9 Annex B (normative) Return loss 10 Annex C (normative) Attenuation . 11 Table A.1 Typical power rating values 9 Table B.1 Typical return loss values. 10 Table C

20、.1 Typical attenuation values . 11 61196-8-6 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ COAXIAL COMMUNICATION CABLES Part 8-6: Detail specification for 75-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation FOREWORD 1) The International Electrotechnical Com

21、mission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

22、 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee

23、 interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accorda

24、nce with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all inter

25、ested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsi

26、ble for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence b

27、etween any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of

28、 conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

29、 members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publicat

30、ion or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publicat

31、ion may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61196-8-6 has been prepared by subcommittee 46A: Coaxial cables, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and mi

32、crowave passive components and accessories. The text of this standard is based on the following documents: FDIS Report on voting 46A/1091/FDIS 46A/1105/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This Interna

33、tional Standard is to be used in conjunction with IEC 61196-1:2005 and IEC 61196-8:2012. 4 61196-8-6 IEC:2012 A list of all parts of IEC 61196 series, published under the general title Coaxial communication cables, can be found on the IEC website. This publication has been drafted in accordance with

34、 the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirm

35、ed, withdrawn, replaced by a revised edition, or amended. 61196-8-6 IEC:2012 5 COAXIAL COMMUNICATION CABLES Part 8-6: Detail specification for 75-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation 1 Scope This part of IEC 61196 applies to coaxial communication cables

36、described in IEC 61196-8. It specifies the requirements for 75-047 type semi-flexible radio frequency and coaxial cables with polytetrafluoroethylene (PTFE) dielectric. These cables are for use in microwave and wireless equipment or other signal transmission equipment or units at frequencies from 50

37、0 MHz up to 18 GHz. This part of IEC 61196 is to be used in conjunction with IEC 61196-1:2005 and IEC 61196-8:2012. It determines the layout and style with respect to the model and type. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document

38、and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Documents which are needed to achieve the tests according to Clause 3, item 9 or item 10, re

39、spectively, are listed in IEC 61196-8. IEC 61196-1:2005, Coaxial communication cables Part 1: Generic specification General, definitions and requirements IEC 61196-1-115, Coaxial communication cables Part 1-115: Electrical test methods Test for regularity of impedance (pulse/step function return los

40、s) IEC 61196-8:2012, Coaxial communication cables Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric IEC 61196-8-1:2012, Coaxial communication cables Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene (PTFE)

41、 dielectric 6 61196-8-6 IEC:2012 3 Detail specification Numbers in square brackets are explained in IEC 61196-8-1:2012, Clause 3. Coaxial communication cables Part 8-6: Detail specification for 75-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation 1 Prepared by: IEC S

42、C 46A 2 Document No. IEC 61196-8-6 Issue: first Date: 2012 3 Available from: IEC 4 Generic specification IEC 61196-1 Sectional specification IEC 61196-8 5 Additional references: IEC 61196-1-115 6 Cable description: 75-047- XX -IEC 61196-8-6 75-047- X -IEC 61196-8-6 Key: 1: Inner conductor (SPC or SP

43、CW) 2: Dielectric (Solid PTFE) 3: Outer conductor (Tin soaked copper wire braid) 4: Sheath (FEP, LSZH or PVC) 7 Cable construction Variants Constructions 75-047-1 75-047-2 75-047-11 75-047-21 75-047-12 75-047-22 75-047-13 75-047-23 Inner conductor Material SPC SPCW SPC SPCW SPC SPCW SPC SPCW Diamete

44、r (mm) 0,16 0,16 0,16 0,16 Tolerance (mm) 0,01 0,01 0,01 0,01 Dielectric Material PTFE PTFE PTFE PTFE Diameter (mm) 0,94 0,94 0,94 0,94 Tolerance (mm) 0,05 0,05 0,05 0,05 Outer conductor Material tin soaked copper wire braid tin soaked copper wire braid tin soaked copper wire braid tin soaked copper

45、 wire braid Diameter (mm) 1,14 1,14 1,14 1,14 Tolerance (mm) 0,05 0,05 0,05 0,05 Sheath Material FEP PVC LSZH Minimum thickness (mm) 0,16 0,24 0,24 61196-8-6 IEC:2012 7 Diameter (mm) 1,54 1,74 1,74 Tolerance (mm) 0,10 0,10 0,10 NOTE Variants according to IEC 61196-8, 6.1.2. SPC silver plated copper

46、wire. SPCW silver plated copper clad steel wire. PTFE polytetrafluoroethylene. FEP poly fluorinated ethylene propylene. LSZH low smoke zero halogen. PVC polyvinyl chloride. 8 Engineering information (reference only) Variants Items 75-047-1 75-047-2 75-047-11 75-047-21 75-047-12 75-047-22 75-047-13 7

47、5-047-23 Operating temperature range 55 C to 125 C 55 C to 125 C 40 C to 85 C 15 C to 70 C Maximum operating frequency 3 GHz 3 GHz 3 GHz 3 GHz Nominal characteristic impedance 75 75 75 75 Maximum continue working voltage 1,0 kV rms 1,0 kV rms 1,0 kV rms 1,0 kV rms Minimum bending radius (static stat

48、e) 4 mm 4 mm 4 mm 4 mm Minimum bending radius (dynamic state) 12 mm 12 mm 12 mm 12 mm Nominal weight 4,6 kg/km 6,4 kg/km 6,6 kg/km 6,6 kg/km Power rating As shown in Annex A 9 Inspection value, rating or characteristic 10 Subclause of IEC 61196-8 11 Value 12 Remarks Electrical characteristic 7.1 Con

49、ductor direct current resistance 7.1.1 0,98 /m (SPC) 2,6 /m (SPCW) 20 C Capacitance 7.1.2 76 pF/m 1 000 Hz Withstand voltage of dielectric 7.1.3 2 kV rms 40 Hz to 60 Hz Withstand voltage of sheath 7.1.4 1,5 kV rms 40 Hz to 60 Hz (applies to cables with sheath) Mean characteristic impedance 7.1.5 75 2,5 200 MHz Regulari