IEC 61280-1-4-2009 Fibre optic communication subsystem test procedures - Part 1-4 General communication subsystems - Light source encircled flux measurement met.pdf

1、 IEC 61280-1-4Edition 2.0 2009-11INTERNATIONAL STANDARD NORME INTERNATIONALEFibre optic communication subsystem test procedures Part 1-4: General communication subsystems Light source encircled flux measurement method Procdures dessai des sous-systmes de tlcommunication fibres optiques Partie 1-4: S

2、ous-systmes gnraux de tlcommunication Mthode de mesure du flux inscrit de la source lumineuse IEC61280-1-4:2009 colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced o

3、r utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining ad

4、ditional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et

5、par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utili

6、sez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization th

7、at prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might

8、have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch

9、/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 2

10、0 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assista

11、nce, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui

12、a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publicati

13、ons de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CE

14、I: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectro

15、niques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si

16、vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61280-1-4Edition 2.0 2009-11INTERNATIONAL STANDARD NORME INTERNATIONALEFibre optic commu

17、nication subsystem test procedures Part 1-4: General communication subsystems Light source encircled flux measurement method Procdures dessai des sous-systmes de tlcommunication fibres optiques Partie 1-4: Sous-systmes gnraux de tlcommunication Mthode de mesure du flux inscrit de la source lumineuse

18、 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE WICS 33.180.01 PRICE CODECODE PRIXISBN 2-8318-1070-6 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale colourinside 2 61280-1-4 IEC:

19、2009 CONTENTS FOREWORD.4 0 Introduction 6 0.1 General .6 0.2 Changes from previous edition 6 0.3 Assumptions applicable to the characterization of data sources 6 0.4 Assumptions applicable to the characterization of measurement sources 6 1 Scope.7 2 Normative references .7 3 Terms and definitions .7

20、 4 Symbols .8 5 Apparatus.9 5.1 Common apparatus .9 5.1.1 General .9 5.1.2 Computer 10 5.1.3 Image digitizer.10 5.1.4 Detector 10 5.1.5 Magnifying optics.11 5.1.6 Attenuation11 5.1.7 Micropositioner (optional) 11 5.1.8 Input port.12 5.1.9 Calibration light source12 5.2 Transmission source apparatus.

21、12 5.2.1 General .12 5.2.2 Test jumper assembly13 5.2.3 Fibre shaker 13 5.3 Measurement source apparatus 14 6 Sampling and specimens14 7 Geometric calibration .15 8 Measurement procedure.15 8.1 Safety .15 8.2 Image acquisition 15 8.2.1 Raw image acquisition.15 8.2.2 Dark image acquisition 16 8.2.3 C

22、orrected image16 8.3 Optical centre determination16 8.3.1 General .16 8.3.2 Centroid image 16 8.3.3 Centroid computation 17 8.4 Test source image acquisition .17 9 Computation of encircled flux .17 9.1 Computation of radial data functions .17 9.2 Integration limit and baseline determination.19 9.2.1

23、 Integration limit19 9.2.2 Baseline determination 19 9.2.3 Baseline subtraction 19 61280-1-4 IEC:2009 3 9.3 Computation of encircled flux 19 10 Results.20 10.1 Information available with each measurement .20 10.2 Information available upon request20 11 Specification information 20 Annex A (informati

24、ve) Measurement sensitivity considerations 22 Annex B (informative) Theory of geometric calibration using the micropositioner .27 Annex C (normative) Procedure for geometric calibration using the micropositioner.32 Bibliography34 Figure 1 Apparatus block diagram10 Figure 2 Typical set-up for transmi

25、ssion source measurement .13 Figure 3 Fibre shaker example.14 Figure 4 Pixel and ring illustration18 Figure A.1 Core images from instrument A and instrument B .22 Figure A.2 Compressed core images from instrument A and instrument B22 Figure A.3 Intensity versus radius for Instruments A and B 23 4 61

26、280-1-4 IEC:2009 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES Part 1-4: General communication subsystems Light source encircled flux measurement method FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for s

27、tandardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes

28、 International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may parti

29、cipate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement bet

30、ween the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publicati

31、ons have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for a

32、ny misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the correspondin

33、g national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any ser

34、vices carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC Na

35、tional Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention

36、 is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC sh

37、all not be held responsible for identifying any or all such patent rights. International Standard IEC 61280-1-4 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. This second edition cancels and replaces the first edition publi

38、shed in 2003. This second edition constitutes a technical revision. The significant technical changes with respect to the previous edition are described in the introduction. The text of this standard is based on the following documents: FDIS Report on voting 86C/920/FDIS 86C/932/RVD Full information

39、 on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 61280-1-4 IEC:2009 5 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61280 series can be found, under the general ti

40、tle Fibre optic communication subsystem test procedures, on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publica

41、tion. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The “colour inside” logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents.

42、Users should therefore print this publication using a colour printer. 6 61280-1-4 IEC:2009 0 Introduction 0.1 General This part of IEC 61280 is used to measure the encircled flux of a multimode light source. Encircled flux is a measure, as a function of radius, of the fraction of the total power rad

43、iating from a multimode optical fibres core. The basic approach is to collect 2D nearfield data using a calibrated camera, and to mathematically convert the 2D data into three normalized functions of radial distance from the fibres optical centre. The three functions are intensity, incremental flux

44、and encircled flux. Intensity has dimension optical power per area; incremental flux has dimension power per differential of radius; and encircled flux has dimension total optical power, all three being functions of radius. These three radial functions are intended to characterize fibre optic laser

45、sources either for use in mathematical models predicting the minimum guaranteed length of a communications link, or to qualify a light source to measure insertion loss in multimode links. 0.2 Changes from previous edition This edition of the standard differs from its predecessor in both scope and co

46、ntent. Many of the content changes improve the measurement precision. Several changes have been made to the computation procedure: the integration methodology of the radial functions was simple summation, and is now specified to use trapezoidal integration or other higher-order techniques (see 9.3);

47、 a baseline subtraction step is specified to improve immunity to DC drifts (see 9.2.2 and 9.2.3); the ring width parameter is explicitly specified (see 9.2.1); the integration limit is specified (see 9.3). The geometric calibration of the apparatus microscope now specifies either (depending on the a

48、pplication) the methodology of IEC 61745 or the original technique using the micropositioning stage (see Clause 7). Pixel sensitivity uniformity correction is now optional. 0.3 Assumptions applicable to the characterization of data sources The 50-m or 62,5-m core near-parabolic graded-index multimod

49、e fibre used as the “test jumper assembly” is treated as if it possessed perfect circular symmetry about its optical centre, as asymmetries in the launched optical flux distributions will dominate any lopsidedness of the test jumper assembly. It is further assumed that all cladding modes will be stripped by passage through the specified ten metres or more of fibre. The modes o