IEC 61587-5-2013 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5 Seismic tests for chassis subracks and associated p.pdf

1、 IEC 61587-5 Edition 1.0 2013-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 Part 5: Seismic tests for chassis, subracks and plug-in units Structures mcaniques pour quipement lectronique Essais pour la CEI 60917 et la C

2、EI 60297 Partie 5: Essais sismiques pour chssis, bacs et units enfichables IEC61587-5:2013 colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any for

3、m or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to th

4、is publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lect

5、ronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci

6、-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organ

7、ization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendm

8、ent might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IE

9、C Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical

10、terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publicat

11、ion or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux

12、technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/search

13、pub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform su

14、r les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 t

15、ermes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous

16、 avez des questions contactez-nous: csciec.ch. IEC 61587-5 Edition 1.0 2013-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 Part 5: Seismic tests for chassis, subracks and plug-in units Structures mcaniques pour quipemen

17、t lectronique Essais pour la CEI 60917 et la CEI 60297 Partie 5: Essais sismiques pour chssis, bacs et units enfichables INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE T ICS 31.240 PRICE CODE CODE PRIX ISBN 978-2-8322-1300-1 Registered trademark of the Internati

18、onal Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinside 2 61587-5

19、 IEC:2013 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope and object . 7 2 Normative references 7 3 Terms and definitions 8 4 Equipment test categories . 8 5 Test waveform and acceleration condition . 9 5.1 General 9 5.2 General conditions . 9 5.3 Single-axis acceleration . 9 5.4 Tri-axial accelerati

20、on 10 5.5 Specimen monitoring . 12 5.6 Seismic simulation . 13 6 Test setup and parts to be monitored . 13 6.1 General 13 6.2 Category A Plug-in units . 13 6.2.1 General 13 6.2.2 Plug-in unit simulated load 13 6.2.3 Plug-in unit test setup onto the test fixture 15 6.2.4 Plug-in unit test fixture set

21、up to the vibration table 17 6.2.5 Plug-in unit mechanical parts under test . 18 6.2.6 Vibration response monitoring 18 6.2.7 Plug-in unit measurements . 18 6.2.8 Test sequence 19 6.2.9 Plug-in unit electrical parts test (free and fixed connector) 19 6.2.10 Acceptance criteria . 19 6.3 Category B Ch

22、assis or subracks . 19 6.3.1 General 19 6.3.2 Chassis or subrack simulated load 20 6.3.3 Chassis or subrack test setup onto the vibration table 21 6.3.4 Chassis or subrack mechanical parts under test . 21 6.3.5 Vibration response monitoring 21 6.3.6 Chassis or subrack measurements . 22 6.3.7 Test se

23、quence 22 6.3.8 Acceptance criteria . 22 Annex A (informative) Example of test setup reporting . 23 A.1 Subrack test setup reporting 23 A.2 Plug-in unit test setup reporting . 23 Bibliography 24 Figure 1 RRS for the test wave (single-axis acceleration)(damping ratio 2,0 %) . 10 Figure 2 Time history

24、 of the test wave (single-axis acceleration) 10 Figure 3 RRS for the test wave (tri-axial acceleration)(damping ratio 3 %) . 11 Figure 4 Time history of the test wave for each axis (tri-axial acceleration) 12 61587-5 IEC:2013 3 Figure 5 Plug-in unit intended use A load distribution (discrete) . 14 F

25、igure 6 Plug-in unit intended use B load distribution (compact) 15 Figure 7 Plug-in unit test setup Subrack 16 Figure 8 Plug-in unit test setup Chassis with integrated subrack . 17 Figure 9 Block diagram of the plug-in unit test setup 18 Figure 10 Chassis or subrack test setup 20 Figure 11 Block dia

26、gram of the chassis or subrack test setup 21 4 61587-5 IEC:2013 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT TESTS FOR IEC 60917 AND IEC 60297 Part 5: Seismic tests for chassis, subracks and plug-in units FOREWORD 1) The International Electrotechnical Co

27、mmission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end an

28、d in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committe

29、e interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accord

30、ance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all inte

31、rested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held respons

32、ible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence

33、between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks o

34、f conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts an

35、d members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publica

36、tion or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publica

37、tion may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61587-5 has been prepared by subcommittee 48D: Mechanical structures for electronic equipment, of IEC technical committee 48: Electromechanical compon

38、ents and mechanical structures for electronic equipment. The text of this standard is based on the following documents: FDIS Report on voting 48D/549/FDIS 48D/553/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. T

39、his publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 61587-5 IEC:2013 5 A list of all parts of IEC 61587 series, under the general title Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297, can be found on the IEC website. The committee has

40、 decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or a

41、mended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 6 61587-5 IEC:2013 INTRODUCTION This s

42、tandard is based on IEC 61587-2: Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 Part 2: Seismic tests for cabinets and racks and ATIS-0600329:2008:Network Equipment Earthquake Resistance. This standard sets forth test setups, performance requirements, and acceptance

43、 criteria for determining the robustness of chassis, subracks, and associated plug-in units according to the IEC 60297 and IEC 60917 series that may provide a level of survivability and preserve functionality during and after a seismic occurrence (an earthquake). This standard does not replace regio

44、nal seismic system, installation standards, or specifications. The intent of this standard is to provide a common methodology to perform and report seismic test conformance of chassis, subracks, and plug-in units according to the IEC 60297 and IEC 60917 series within a specified weight category. Mas

45、s distribution is based on the intended use. The terms “intended use” or “simulation of service condition” or “worst-case simulated configuration” are widely used in the telecom industry but also in the electronics industry. Seismic ground motion occurs simultaneously and randomly in all directions.

46、 Single-axis or tri-axis tests may be selected to simulate the seismic environment for testing. 61587-5 IEC:2013 7 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT TESTS FOR IEC 60917 AND IEC 60297 Part 5: Seismic tests for chassis, subracks and plug-in units 1 Scope and object This part of IEC 61587

47、specifies seismic test requirements for chassis, subracks, and plug-in units as defined in the IEC 60297 and IEC 60917 series. It applies in whole or in part, only to the mechanical structures of chassis, subracks, and plug-in units for electronic equipment, according to the IEC 60297 and IEC 60917

48、series, and does not apply to electronic components, equipment or systems within the mechanical structures. NOTE Subracks may be an integral part of a chassis (often called in the industry a shelf or a crate). The object of this standard is to establish a level of physical integrity of chassis, subr

49、acks, and plug-in units according to IEC 60297 and IEC 60917 series that may provide a level of survivability that will preserve functionality during and after a seismic occurrence. It is intended to provide the user with a high level of confidence in the selection of an equipment practice to meet such needs. Since IEC 60297 and IEC 60917 series chassis, subracks, and plug-in units come in m