IEC 61754-7-1-2014 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1 Type MPO connector family - One fibr.pdf

1、 IEC 61754-7-1 Edition 1.0 2014-09 INTERNATIONAL STANDARD Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 7-1: Type MPO connector family One fibre row IEC 61754-7-1:2014-09(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switze

2、rland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country

3、 of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb

4、Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC public

5、ations The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire biblio

6、graphical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (ref

7、erence number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once

8、 a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical V

9、ocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 8

10、6 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 61754-7-1 Edition 1.0 2014-09 INTERNATIONAL STANDARD Fibre optic interconnecting devices and

11、passive components Fibre optic connector interfaces Part 7-1: Type MPO connector family One fibre row INTERNATIONAL ELECTROTECHNICAL COMMISSION V ICS 33.180.20 PRICE CODE ISBN 978-2-8322-1843-3 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained

12、 this publication from an authorized distributor. 2 IEC 61754-7-1:2014 IEC 2014 CONTENTS FOREWORD . 3 1 Scope 5 2 Description 5 3 Interfaces 5 Figure 1 MPO connector configurations 6 Figure 2 MPO female plug, down-angled interface 7 Figure 3 MPO female plug, up-angled interface 7 Figure 4 Optical da

13、tum target location diagrams . 9 Figure 5 Gauge pin . 10 Figure 6 Gauge for plug 10 Figure 7 MPO male plug, down-angled interface . 11 Figure 8 MPO male plug, up-angled interface . 12 Figure 9 MPO adaptor interface, opposed keyway configuration 14 Figure 10 MPO female plug, flat interface . 16 Figur

14、e 11 MPO male plug, flat interface 18 Figure 12 MPO backplane housing interface (1 of 2) . 20 Figure 13 MPO printed board housing interface (1 of 2) 23 Figure 14 MPO adaptor interface, aligned keyway configuration 26 Figure 15 MPO active device receptacle, angled interface. 28 Figure 16 MPO active d

15、evice receptacle, flat interface 30 Table 1 Dimensions of the MPO female plug, down- or up-angled interfaces . 8 Table 2 Dimensions of the gauge pin 10 Table 3 Dimensions of the gauge for plug . 11 Table 4 Dimensions of the MPO male plug, down- or up-angled interfaces 13 Table 5 Dimensions of the MP

16、O adaptor interface, opposed keyway configuration 15 Table 6 Dimensions of the MPO female plug, flat interface . 17 Table 7 Dimensions of the MPO male plug, flat interface 19 Table 8 Dimensions of the MPO backplane housing 22 Table 9 Grade 23 Table 10 Dimensions of the MPO printed board housing inte

17、rface . 25 Table 11 Dimensions of the MPO adaptor interface, aligned keyway configuration 27 Table 12 Dimensions of the MPO active device receptacle, angled interface . 29 Table 13 Dimensions of the MPO active device receptacle, flat interface . 31 IEC 61754-7-1:2014 IEC 2014 3 INTERNATIONAL ELECTRO

18、TECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 7-1: Type MPO connector family One fibre row FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national

19、 electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Sp

20、ecifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Inter

21、national, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The fo

22、rmal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations

23、for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.

24、 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication sh

25、all be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent cert

26、ification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal in

27、jury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references

28、 cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for ident

29、ifying any or all such patent rights. International Standard IEC 61754-7-1 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. This first edition of IEC 61754-7-1, along with the first edition of IEC 61754-7-

30、2, cancels and replaces the third edition of IEC 61754-7, published in 2008. This first edition of IEC 61754-7-1 includes the one fibre row MPO variants, including the addition of active device receptacles and up-angled plugs. The first edition of IEC 61754-7-2 will include the two fibre row MPO var

31、iants and related active device receptacles and up-angled plugs. 4 IEC 61754-7-1:2014 IEC 2014 Following the publication of both IEC 61754-7-1 and IEC 61754-7-2, IEC 61754-7 will be withdrawn. The text of this standard is based on the following documents: FDIS Report on voting 86B/3794A/FDIS 86B/382

32、6/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts in the IEC 61754 series, under the general title Fibr

33、e optic interconnecting devices and passive components fibre optic connector interfaces, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the

34、data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IEC 61754-7-1:2014 IEC 2014 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMP

35、ONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 7-1: Type MPO connector family One fibre row 1 Scope This part of IEC 61754 defines the standard interface dimensions for type MPO family of connectors with one row of fibres. 2 Description The parent connector for type MPO connector family is a multiway

36、plug characterized by a rectangular ferrule normally 6,4 mm 2,5 mm which utilizes two pins of 0,7 mm diameter as its alignment. The variant in this standard provides a joint of 2 to 12 fibres by arraying them between two pin-positioning holes in the ferrule in a one-layer, (one-row) arrangement. The

37、 connector includes a push-pull coupling mechanism and a ferrule spring loaded in the direction of the optical axis. The connector has a single male key which may be used to orient and limit the relative position between the connector and the component to which it is mated. Connector interfaces are

38、configured using a female plug without pins, a male plug with pins fixed and an adaptor as shown in Figure 1. The female plug is intermateable with the male plug. There are two angled-interface plugs, one called down-angled and the other up-angled. They are defined for both male and female plugs. Th

39、e up and down descriptors refer to the tilt direction of the ferrules angled end-face relative to the fibre axis when looking toward the end- face with the plugs key feature on the top. For down-angled plugs, the angled surface faces slightly downward. For up-angled plugs, the angled surface faces s

40、lightly upward. These different angles affect intermateability for the two adaptor types. An opposed keyway adaptor mates two plugs with the keys in opposite orientations, for example one side keyway-up and the other keyway-down. In contrast, an aligned keyway adaptor mates two plugs with the keys a

41、t the same orientation. When using an opposed keyway adaptor with angled interfaces, two down-angled plugs or two up-angled plugs are connected. For aligned keyway adaptors with angled interfaces, one down-angled plug and one up-angled plug are connected. Moreover, connector interfaces between the f

42、emale plug and the male plug are configured by applying a backplane housing and a printed board housing instead of the adaptor. Additionally, the female plug interface is intermateable with the active device receptacle. 3 Interfaces This standard contains the following standard interfaces: Interface

43、 IEC 61754-7-1-1: MPO female plug, down-angled interface for 2 to 12 fibres Interface IEC 61754-7-1-2: MPO male plug, down-angled interface for 2 to 12 fibres Interface IEC 61754-7-1-3: MPO adaptor interface Opposed keyway configuration Interface IEC 61754-7-1-4: MPO female plug, flat interface for

44、2 to 12 fibres 6 IEC 61754-7-1:2014 IEC 2014 Interface IEC 61754-7-1-5: MPO male plug, flat interface for 2 to 12 fibres Interface IEC 61754-7-1-6: MPO backplane housing interface Interface IEC 61754-7-1-7: MPO printed board housing interface Interface IEC 61754-7-1-8: MPO adaptor interface Aligned

45、keyway configuration Interface IEC 61754-7-1-9: MPO active device receptacle, angled interface Interface IEC 61754-7-1-10: MPO active device receptacle, flat interface Interface IEC 61754-7-1-11: MPO female plug, up-angled interface for 2 to 12 fibres Interface IEC 61754-7-1-12: MPO male plug, up-an

46、gled interface for 2 to 12 fibres The following interfaces are intermateable: Female plugs Adaptors/housings/ receptacles Male plugs 61754-7-1-1 61754-7-1-3 61754-7-1-2 61754-7-1-11 61754-7-1-3 61754-7-1-12 61754-7-1-1 61754-7-1-8 61754-7-1-12 61754-7-1-11 61754-7-1-8 61754-7-1-2 61754-7-1-4 61754-7

47、-1-3 and 61754-7-1-8 61754-7-1-5 61754-7-1-1 or 61754-7-1-11 61754-7-1-6 and 61754-7-1-7 61754-7-1-2 or 61754-7-1-12 61754-7-1-4 61754-7-1-6 and 7-1-7 61754-7-1-5 61754-7-1-1 61754-7-1-9 N/A 61754-7-1-4 61754-7-1-10 N/A NOTE Connector interfaces with 2 to 12 fibres will intermate and will correctly

48、align the lower defined numbers of optical datum targets (see Figure 4) Figure 1 shows MPO connector configurations. Figure 1 MPO connector configurations IEC IEC 61754-7-1:2014 IEC 2014 7 Figures 2 and 3 show down-angled and up-angled interface of the MPO female plug. Table 1 gives the dimensions o

49、f the MPO female plug, down- or up-angled interfaces. Figure 2 MPO female plug, down-angled interface Figure 3 MPO female plug, up-angled interface IEC IEC 8 IEC 61754-7-1:2014 IEC 2014 Table 1 Dimensions of the MPO female plug, down- or up-angled interfaces Reference Dimensions Minimum Maximum A aC bD D1 hE F G H I c,f J K L d,e M N O P Q R S T U U1 hAA AB AC AD i,j 0,699 mm 4,597 mm 6,3 mm 6,7 mm 8,34 mm 9,49 mm 10,