IEC 61800-2-2015 Adjustable speed electrical power drive systems - Part 2 General requirements - Rating specifications for low voltage adjustable speed a.c powe.pdf

1、 IEC 61800-2 Edition 2.0 2015-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Adjustable speed electrical power drive systems Part 2: General requirements Rating specifications for low voltage adjustable speed a.c. power drive systems Entranements lectriques de puissance vitesse variable Partie 2: Ex

2、igences gnrales Spcifications de dimensionnement pour systmes dentranement de puissance vitesse variable en courant alternatif et basse tension IEC 61800-2:2015-07(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwi

3、se specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questi

4、ons about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut

5、 tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir

6、 des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The I

7、nternational Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Pl

8、ease make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Rep

9、orts and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced a

10、nd withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary o

11、f electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical

12、terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your fe

13、edback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit,

14、 llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Applic

15、ation autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche a

16、vance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publica

17、tions IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en f

18、ranais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Df

19、initions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csci

20、ec.ch. IEC 61800-2 Edition 2.0 2015-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Adjustable speed electrical power drive systems Part 2: General requirements Rating specifications for low voltage adjustable speed a.c. power drive systems Entranements lectriques de puissance vitesse variable Partie

21、 2: Exigences gnrales Spcifications de dimensionnement pour systmes dentranement de puissance vitesse variable en courant alternatif et basse tension INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.160.30; 29.200 ISBN 978-2-8322-2754-1 Registered trademark

22、 of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colou

23、r inside 2 IEC 61800-2:2015 IEC 2015 CONTENTS FOREWORD . 6 INTRODUCTION . 8 1 Scope 10 2 Normative references 11 3 Terms and definitions 12 4 Ratings and specifications for the act of installing, commissioning and operation 28 4.1 General . 28 4.2 BDM/CDM/PDS characteristics and topology 29 4.2.1 Ge

24、neral . 29 4.2.2 BDM/CDM/PDS characteristics 29 4.2.3 Basic topology for BDM/CDM/PDSs 30 4.3 Ratings . 33 4.3.1 General . 33 4.3.2 Input ratings 34 4.3.3 Output ratings 35 4.3.4 Operating quadrants 37 4.3.5 Ratings and properties of the control equipment 37 4.3.6 Special ratings related to BDM/CDM/P

25、DS or motor 37 4.4 Performance . 38 4.4.1 Operational 38 4.4.2 Fault supervision . 47 4.4.3 Minimum status indication required 47 4.4.4 I/O devices 47 4.5 Electrical safety 49 4.6 Functional safety 49 4.7 EMC . 50 4.8 Eco design 50 4.8.1 General . 50 4.8.2 Energy efficiency and losses . 50 4.8.3 Env

26、ironmental impact 50 4.9 Environmental condition for service, transport and storage . 51 4.9.1 General . 51 4.9.2 Operation 51 4.9.3 Storage and transport of equipment . 56 4.9.4 Environmental service tests (type test) 57 4.10 Types of load duty profiles 58 4.11 Generic interface and use of profiles

27、 for PDS 58 4.12 Voltage on power interface . 60 4.13 Explosive environment 61 5 Test . 61 5.1 General . 61 5.2 Performance of tests . 61 5.2.1 General conditions . 61 5.2.2 Supply system earthing conditions . 61 5.3 Standard tests for BDM/CDM/PDS 62 5.3.1 General . 62 IEC 61800-2:2015 IEC 2015 3 5.

28、3.2 Test for mass produced products . 63 5.3.3 Test for one-off products 63 5.4 Test specifications 64 5.4.1 Visual inspections (type test, sample test and routine test) 64 5.4.2 Static performance and rating test . 64 5.4.3 Electrical safety . 70 5.4.4 Functional safety . 70 5.4.5 EMC 70 5.4.6 Eco-

29、design 71 5.4.7 Environmental condition tests 71 5.4.8 Communication profiles . 76 5.4.9 Explosive atmosphere environment . 77 6 Information and marking requirements . 77 6.1 General . 77 6.2 Marking on product . 78 6.3 Information to be supplied with the PDS or BDM/CDM 79 6.4 Information to be supp

30、lied or made available 79 6.5 Safety and warning labels . 79 6.5.1 Warning labels . 79 6.5.2 Additional safety considerations of a PDS 79 Annex A (informative) Classification of PDS into low-voltage system and high-voltage system 81 A.1 General . 81 A.2 Classification of PDS by voltage . 81 A.3 Exam

31、ples 82 A.3.1 PDS with an input transformer . 82 A.3.2 PDS with an input transformer and an output transformer 82 A.3.3 PDS with a step-up chopper 83 A.3.4 PDS with parallel-connected line-side converters. 83 A.3.5 PDS with series-connected line-side converters . 84 A.3.6 PDS with star-connected inv

32、erters . 85 A.3.7 PDS with a multilevel inverter 86 Annex B (informative) Determination of the input current of BDM/CDM/PDS 88 Bibliography 90 Figure 1 (BDM/CDM/PDS) manufacturer/customer relationship 15 Figure 2 Example of a power drive system . 25 Figure 3 Operating quadrants 28 Figure 4 Typical B

33、DM/CDM/PDS 31 Figure 5 Common d.c.link BDM/CDM/PDS . 31 Figure 6 BDM/CDM/PDS with brake . 32 Figure 7 BDM/CDM/PDS with AIC 33 Figure 8 Example of operating region of a PDS 35 Figure 9 Overload cycle example . 36 Figure 10 Deviation band . 39 Figure 11 Time response following a step change of referen

34、ce input no change in operating variables . 42 4 IEC 61800-2:2015 IEC 2015 Figure 12 Time response following a change in an operating variable no reference change 43 Figure 13 Time response following a reference change at specified rate 44 Figure 14 Frequency response of the control Reference value

35、as stimulus 45 Figure 15 Example of relationship of IEC 61800-7 series to control system software and the BDM/CDM/PDS 60 Figure 16 Measuring circuit of PDS 65 Figure A.1 Basic configuration of PDS . 81 Figure A.2 An example of low-voltage PDS with an input transformer . 82 Figure A.3 An example of l

36、ow-voltage PDS with an input/output transformer 83 Figure A.4 An example of low-voltage PDS with a step-up chopper . 83 Figure A.5 An example of low-voltage PDS with parallel-connected rectifiers 84 Figure A.6 An example of high-voltage PDS with parallel-connected line-side converters . 84 Figure A.

37、7 An example of low-voltage PDS with series-connected rectifiers . 85 Figure A.8 An example of high-voltage PDS with series-connected rectifiers 85 Figure A.9 An example of high-voltage PDS with star-connected inverters 86 Figure A.10 An example of high-voltage PDS with a multilevel inverter 87 Figu

38、re A.11 An example of a power module . 87 Figure B.1 Example of distortion effect of the input current affected by a three-phase converter with capacitive load . 88 Table 1 List of terms 13 Table 2 List of input ratings of BDM/CDM/PDS. 13 Table 3 List of output ratings of BDM/CDM/PDS 14 Table 4 List

39、 of motor speed and torque ratings 14 Table 5 Overview of input and output ratings of the BDM/CDM/PDS 33 Table 6 Standard voltages as specified in IEC 60038 . 34 Table 7 Example of reduced maximum continuous load as a function of an overload 36 Table 8 Maximum deviation bands (percent) 39 Table 9 En

40、vironmental service conditions 52 Table 10 Limit of temperature of the cooling medium for indoor equipment 53 Table 11 Definitions of pollution degree . 53 Table 12 Environmental vibration limits for fixed installation . 54 Table 13 Environmental shock limits for fixed installation . 54 Table 14 Sto

41、rage and transport limits . 56 Table 15 Transportation vibration limits 57 Table 16 Transportation limits of free fall . 57 Table 17 Environmental service tests . 58 Table 18 Test overview 62 Table 19 Dry heat test (steady state) . 72 Table 20 Damp heat test (steady state) 73 Table 21 Vibration test

42、 . 74 Table 22 Shock test . 74 IEC 61800-2:2015 IEC 2015 5 Table 23 Salt mist test . 75 Table 24 Dust test 75 Table 25 Sand test . 76 Table 26 Water test . 76 Table 27 Information requirements . 78 Table A.1 Basic classification of PDS by voltage 82 6 IEC 61800-2:2015 IEC 2015 INTERNATIONAL ELECTROT

43、ECHNICAL COMMISSION _ ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS Part 2: General requirements Rating specifications for low voltage adjustable speed a.c. power drive systems FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprisin

44、g all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards

45、, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparato

46、ry work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizati

47、ons. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of re

48、commendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by

49、 any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publicat