IEC 61837-4-2015 Surface mounted piezoelectric devices for frequency control and election - Standard outlines and terminal lead connections - Part 4 Hybrid encl.pdf

1、 IEC 61837-4 Edition 2.0 2015-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Surface mounted piezoelectric devices for frequency control and selection Standard outlines and terminal lead connections Part 4: Hybrid enclosure outlines Dispositifs pizolectriques montage en surface pour la commande et l

2、e choix de la frquence Encombrements normaliss et connexions des sorties Partie 4: Encombrements des enveloppes hybrides IEC 61837-4:2015-03(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publica

3、tion may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an en

4、quiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelq

5、ue forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette

6、publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commiss

7、ion (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the late

8、st edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available f

9、or PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just P

10、ublished - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms con

11、taining more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and Fr

12、ench extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need fu

13、rther assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies app

14、arentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous le

15、s renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publicati

16、ons IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les

17、 nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalen

18、ts dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues

19、depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61837-4 Edition 2.0 2015-0

20、3 INTERNATIONAL STANDARD NORME INTERNATIONALE Surface mounted piezoelectric devices for frequency control and selection Standard outlines and terminal lead connections Part 4: Hybrid enclosure outlines Dispositifs pizolectriques montage en surface pour la commande et le choix de la frquence Encombre

21、ments normaliss et connexions des sorties Partie 4: Encombrements des enveloppes hybrides INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 31.140 ISBN 978-2-8322-2428-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Co

22、mmission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 61837-4:2015 IEC 2015 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative refe

23、rences. 5 3 Configuration of enclosures . 5 4 Dimensions of surface mounted piezoelectric devices with hybrid enclosure outlines. 5 5 Table of detailed dimensions 5 6 Designation of surface mounted piezoelectric devices with hybrid enclosure outlines. 6 Table 1 Revised Configuration . 6 Table 2 Desi

24、gnation of surface mounted piezoelectric devices with hybrid enclosure outline 6 Table 3 Lead connections 7 IEC 61837-4:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION STANDARD OUTLINES AND TERMINAL LEAD CONNECTION

25、S Part 4: Hybrid enclosure outlines FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questio

26、ns concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)

27、”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collabo

28、rates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on

29、the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure t

30、hat the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the

31、 maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bo

32、dies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach t

33、o IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) an

34、d expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9

35、) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61837-4 has been prepared by IEC technical committee 49: Piezoele

36、ctric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. This second edition cancels and replaces the first edition published in 2004. It constitutes a technical revision. This edition includes the following significant technical changes wi

37、th respect to the previous edition: Outline drawing is defined as one set of drawings consisting of four views, which are the view from above, the front view, the view from the right, and the view from below, instead of one set consisting of three views as provided in the previous edition. The confi

38、gurations of the enclosures were revised as shown in Table 1. 4 IEC 61837-4:2015 IEC 2015 The text of this standard is based on the following documents: FDIS Report on voting 49/1117/FDIS 49/1129/RVD Full information on the voting for the approval of this standard can be found in the report on votin

39、g indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This International Standard shall be read in conjunction with IEC 61240:2012. A list of all parts in the IEC 61837 series, published under the general title Surface mounted piezoelect

40、ric devices for frequency control and selection Standard outlines and terminal lead connections, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“

41、in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 61837-4:2015 IEC 2015 5 SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION STANDARD OUTLINES AND TERMINAL LEAD CONNECTI

42、ONS Part 4: Hybrid enclosure outlines 1 Scope This part of IEC 61837 specifies the outline drawings and terminal lead connections for surface piezoelectric devices with hybrid enclosure outlines and is based on IEC 61240:2012 which standardized layout rules of outline drawings of surface-mounted dev

43、ice. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any

44、amendments) applies. IEC 61240:2012, Piezoelectric devices Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection General rules 3 Configuration of enclosures If there are versions with different height of the same enclosures, each enclosure is expressed

45、by a dash (/) plus two digit number after the basic type name. The version number is indicated in the dimension table in the sheet. 4 Dimensions of surface mounted piezoelectric devices with hybrid enclosure outlines The dimensions in this standard apply to surface mounted piezoelectric devices. Onl

46、y those dimensions which meet the requirements of IEC 61240 are given. Drawings of the same size should be described in the same scale. The scale should be chosen based on the Table A.1 of IEC 61240:2012. In this part of IEC 61837, it is recommended that enclosures with nominal length value larger t

47、han 20 mm use scale 2:1. 5 Table of detailed dimensions The dimensions shall be given only where the letter x is shown in the table of the given sheet. If there are plural identical enclosures with a different height (G), the typical value of G shall be shown in the table. Or different values of G s

48、hall be expressed with a subscript number such as G 1 , G 2 , etc. The identity references are given in the table in the sheet. 6 IEC 61837-4:2015 IEC 2015 6 Designation of surface mounted piezoelectric devices with hybrid enclosure outlines All corresponding enclosures are listed in Table 2 below.

49、Table 1 Revised Configuration Type Sheet No. Description (Size unit is mm) CO26/01 Sheet 2 Maximum G 1was changed from to 5.5 to 5.7. l 2 , b 2were changed from 2,6, 2,1 to 2,8, 2,3 respectively. CO27/0104 Sheet 3 Maximum B was changed from 9,5 to 9,6. CO27/01,02 Sheet 3 Maximum G 1and G 2were changed from 5,5, 4,7 to 5,7, 4,9 respectively. CO27/04 Sheet 3 CO27 with G 4of 3,0 was newly added. CO28/010