IEC 61935-3-2008 Testing of balanced and coaxial information technology cabling - Part 3 Installed cabling as specified in ISO IEC 15018 and related standards《平.pdf

1、 IEC 61935-3 Edition 1.0 2008-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Testing of balanced and coaxial information technology cabling Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards Essais des cblages de technologies de linformation symtriques et coaxiaux Partie 3

2、: Cblages installs selon les spcifications de lISO/CEI 15018 et des normes connexes IEC 61935-3:2008 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

3、or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this

4、 publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectro

5、nique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-a

6、prs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publish

7、es International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Ca

8、talogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub St

9、ay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definit

10、ions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the C

11、ustomer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, lle

12、ctronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.

13、ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_ne

14、ws/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. I

15、l contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner

16、 des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61935-3 Edition 1.0 2008-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Testing of balanced and coaxial informa

17、tion technology cabling Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards Essais des cblages de technologies de linformation symtriques et coaxiaux Partie 3: Cblages installs selon les spcifications de lISO/CEI 15018 et des normes connexes INTERNATIONAL ELECTROTECHNICAL C

18、OMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 33.120.20 PRICE CODE CODE PRIX ISBN 2-8318-1037-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 61935-3 IEC:2008 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Sco

19、pe.6 2 Normative references .6 3 Terms and definitions .6 4 Home cabling conformance 7 4.1 Applications to be supported .7 4.2 General .7 4.3 Visual inspection .7 4.4 Verification7 5 Qualification and certification testing 8 5.1 General .8 5.2 Qualification testing.8 5.3 Certification testing .8 5.4

20、 Documentation 8 6 Qualification field test instrument9 6.1 General .9 6.2 Cabling configurations tested 9 6.3 Qualification field test parameters .9 6.3.1 Wire map.9 6.3.2 Length.10 6.3.3 Qualification test10 6.3.4 Test results summary documentation.11 Figure 1 Correct pairing .9 Figure 2 Incorrect

21、 pairing.10 61935-3 IEC:2008 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organ

22、ization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities,

23、IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt w

24、ith may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by

25、 agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3)

26、 IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are

27、 used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and th

28、e corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they hav

29、e the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatso

30、ever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publicat

31、ions is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standa

32、rd IEC 61935-3 has been prepared by IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories. This bilingual version, published in 2009-04, corresponds to the English version. The text of this standard is based on the following doc

33、uments: FDIS Report on voting 46/261/FDIS 46/268/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 4 61935-3 IEC:2008 The French version of this standard has not been voted upon. This publication has been drafted i

34、n accordance with the ISO/IEC Directives, Part 2. A list of all the parts of the IEC 61935 series, under the general title Testing of balanced and coaxial information technology cabling, can be found on the IEC website. Future standards in this series will carry the new general title as cited above.

35、 The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced

36、 by a revised edition, or amended. 61935-3 IEC:2008 5 INTRODUCTION Telecommunication cabling for homes has evolved into the specification and deployment of generic cabling. This generic cabling system for homes is specified within ISO/IEC 15018. Formerly, there had been no test requirement for home

37、cabling. Connectivity tests and visual inspection were, at best, random and insufficient. However, bandwidth requirements of the home applications are ever increasing and home-owners need assurance that their generic cabling will indeed support intended network technologies that are delivered to the

38、 home and distributed throughout the home. This part of IEC 61935 addresses both verification and qualification of home cabling. 6 61935-3 IEC:2008 TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards 1 Scope Thi

39、s part of IEC 61935 specifies conformance testing for home cabling. These conformance tests include visual inspection, verification testing and either qualification testing or certification testing. Documentation for the test results are also specified. 2 Normative references The following reference

40、d documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60728-1, Cable networks for television signals, sound signals and in

41、teractive services Part 1: System performance of forward paths IEC 60728-12, Cabled distribution systems for television and sound signals Part 12: Electromagnetic compatibility of systems ISO/IEC 11801, Information technology Generic cabling for customer premises ISO/IEC 15018, Information technolog

42、y Generic cabling for homes 3 Terms and definitions For the purposes of this document, the following definitions apply. 3.1 certification measurements of installed cabling specified in ISO/IEC 11801 (e.g., class D, class E, class F); this requires field testers with traceable accuracy to national st

43、andards 3.2 qualification measurements of installed cabling for specific network technologies (e.g., 100BASE-T, 1000BASE-T, IEEE 1394b 1) ): the measurement accuracy of field testers is not traceable to national standards 3.3 verification measurements of installed cable or cabling for continuity; no

44、 other transmission performance parameters other than connectivity are measured 1)IEEE 1394b: 2002, High Performance Serial Bus (High Speed Supplement) 61935-3 IEC:2008 7 4 Home cabling conformance 4.1 Applications to be supported Applications that may be supported in home cabling are: ICT: such as

45、10, 100 1000BASE-T, IEEE 1394 being the most popular; analog telephone, ISDN and DSL applications; BCT: VHF/UHF TV signals (up to 862 MHz), FM radio signals; satellite TV signals, CCTV; control applications. 4.2 General Telecommunications cabling (e.g., voice, data, video, security, audio, control)

46、can be damaged during the construction phases of rough-in, drywall installation, and even during the siding of the exterior. Many of these damaging faults result from causes such as nails and staples penetrating the cable, severe kinks in the cable where the cable was pulled through a drilled hole i

47、n a stud or joist, or a cable tear where the cable sheath and conductors are damaged from pulling the cable. For these reasons, telecommunications cabling shall yield to a process to ensure conformance. This process includes: a) visual examination of the cabling; b) verification testing of the cabli

48、ng; c) qualification testing or certification testing of the cabling, and d) producing a documented report of results. Visual examination and verification Qualification application specific Certification generic cabling IEC 277/084.3 Visual inspection Whenever it is possible, visual inspection of ea

49、ch cable run shall be made after the cable has been installed, but prior to installation of insulation and drywall. Visual inspection may include but is not limited to a) obvious damage to cable (condition and workmanship); b) separation from EMC sources; c) incorrect bend radi, and d) noticeable excessive cable length. 4.4 Verification Verification testing is performed after cable p