IEC 61937-7-2004 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 7 Non-linear PCM bitstreams according to the AT.pdf

1、 IEC 61937-7 Edition 2.0 2004-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Digital audio Interface for non-linear PCM encoded audio bitstreams applying to IEC 60958 Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats Audionumrique Interface pour les flux de bits

2、audio codage MIC non linaire conformment la CEI 60958 Partie 7: Flux de bits MIC non linaire selon les formats ATRAC, ATRAC2/3 et ATRAC-X IEC 61937-7:2004 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2004 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this

3、publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or hav

4、e an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sou

5、s quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentair

6、es sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrote

7、chnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that yo

8、u have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information

9、on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds lea

10、ding online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc I

11、f you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour

12、tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utile

13、s: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published

14、CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lect

15、roniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donn

16、er des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61937-7 Edition 2.0 2004-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Digital audio Interface for non-linear PCM encoded audio bitstreams applying to IEC 60958 Part 7: Non-linear PCM bitstreams a

17、ccording to the ATRAC, ATRAC2/3 and ATRAC-X formats Audionumrique Interface pour les flux de bits audio codage MIC non linaire conformment la CEI 60958 Partie 7: Flux de bits MIC non linaire selon les formats ATRAC, ATRAC2/3 et ATRAC-X INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECH

18、NIQUE INTERNATIONALE M ICS 33.160.01 PRICE CODE CODE PRIX ISBN 978-2-83220-524-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. A

19、ttention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61937-7 IEC:2004 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms, definitions and abbreviations 5 3.1 Definitions . 5 3.2 Abbreviations 5 4 Mapping of the audio bitstream on to IEC

20、61937 6 4.1 General . 6 4.2 ATRAC, ATRAC2/3 and ATRAC-X burst-info . 6 5 Format of ATRAC, ATRAC2/3 and ATRAC-X data-bursts . 6 5.1 General . 6 5.2 Audio data-bursts 7 5.2.1 The data ATRAC . 7 5.2.2 Latency of ATRAC decoding 8 5.2.3 The data ATRAC2/3 8 5.2.4 Latency of ATRAC2/3 decoding . 9 5.2.5 The

21、 data ATRAC-X 10 5.2.6 Latency of ATRAC-X decoding 11 Bibliography 13 Figure 1 ATRAC data-burst 7 Figure 2 Latency of ATRAC decoding 8 Figure 3 ATRAC2/3 data-burst . 9 Figure 4 Latency of ATRAC2/3 decoding 10 Figure 5 ATRAC-X data-burst 10 Figure 6 Latency of ATRAC-X decoding . 11 Table 1 Fields of

22、burst-info 6 Table 2 Data-type-dependent information for data-type ATRAC . 7 Table 3 Data-type-dependent information for data-type ATRAC2/3 9 Table 4 Data-type-dependent information for data-type ATRAC-X 11 61937-7 IEC:2004 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIGITAL AUDIO INTERFACE FOR NO

23、N-LINEAR PCM ENCODED AUDIO BITSTREAMS APPLYING IEC 60958 Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical com

24、mittees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technic

25、al Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmenta

26、l and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agr

27、eements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use

28、 and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promo

29、te international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indica

30、ted in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach t

31、o IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) an

32、d expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9

33、) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61937-7 has been prepared by Technical Area 4: Digital system int

34、erfaces and protocols, of IEC technical committee 100: Audio, video and multimedia systems and equipment. This second edition cancels and replaces the first edition published in 2002. This edition constitutes a technical revision. This edition includes the following significant technical changes wit

35、h respect to the previous edition: a) In this edition, a new audio data-type of ATRAC-X is added to ATRAC and ATRAC2/3. b) Specific properties such as reference points, repetition period, the method of filling stream gaps, and decoding latency are specified for data-type of ATRAC-X. 4 61937-7 IEC:20

36、04 This bilingual version (2012-12) corresponds to the monolingual English version, published in 2004-11. The text of this standard is based on the following documents: CDV Report on voting 100/752/CDV 100/834/RVC Full information on the voting for the approval of this standard can be found in the r

37、eport on voting indicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 61937 consists of the following parts, undert the general title Digital audio Interface for non-linear P

38、CM encoded audio bitstreams applying IEC 60958: Part 1: General Part 2: Burst-info Part 3: Non-linear PCM bitstreams according to the AC-3 format Part 4: Non-linear PCM bitstreams according to the MPEG audio formats Part 5: Non-linear PCM bitstreams according to the DTS (Digital Theater Systems) for

39、mat(s) Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC format Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats (TA4) Part 8: Non-linear PCM bitstreams according to the Windows Media Audio Professional (TA4) 1The committee has decided that the conte

40、nts of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. 1Under

41、 consideration. 61937-7 IEC:2004 5 DIGITAL AUDIO INTERFACE FOR NON-LINEAR PCM ENCODED AUDIO BITSTREAMS APPLYING IEC 60958 Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats 1 Scope This part of IEC 61937 specifies the method for the digital audio interface specifi

42、ed in IEC 60958 to convey non-linear PCM bitstreams encoded in accordance with the ATRAC, ATRAC2/3 and ATRAC-X formats. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated

43、references, the latest edition of the referenced document (including any amendments) applies. IEC 60958-1, Digital audio interface Part 1: General IEC 60958-3, Digital audio interface Part 3: Consumer applications IEC 61937-1, Digital audio Interface for non-linear PCM encoded audio bitstreams apply

44、ing IEC 60958 Part 1: General IEC 61937-2, Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 2: Burst-info 3 Terms, definitions and abbreviations 3.1 Definitions For the purposes of this document, the definitions given in IEC 61937-1 and IEC 61937-2, as well

45、 as the following, apply. 3.1.1 latency delay time of an external audio decoder to decode an ATRAC, ATRAC2/3 and ATRAC-X data- burst, defined as the sum of two values of the receiving delay time and the decoding delay time 3.2 Abbreviations ATRAC Adaptive TRansform Acoustic Coding ATRAC2 Adaptive TR

46、ansform Acoustic Coding 2 ATRAC3 Adaptive TRansform Acoustic Coding 3 ATRAC2/3 ATRAC2 and/or ATRAC3 ATRAC-X Adaptive TRansform Acoustic Coding-X 6 61937-7 IEC:2004 4 Mapping of the audio bitstream on to IEC 61937 4.1 General The coding of the bitstream and data-burst shall be in accordance with IEC

47、61937-1 and IEC 61937-2. 4.2 ATRAC, ATRAC2/3 and ATRAC-X burst-info This 16-bit burst-info shall contain data-burst information structured in accordance with Table 1. Table 1 Fields of burst-info Bits of Pc Value Contents Reference point R Repetition period of data-burst in IEC 60958 frames 0-4 data

48、type 0-13 in accordance with IEC 61937-1 and IEC 61937-2 14 ATRAC bit 0 of Pa 512 15 ATRAC2/3 bit 0 of Pa 1 024 16 ATRAC-X Sub-data-type dependent Sub-data-type dependent 17-31 in accordance with IEC 61937-2 5, 6 00 2 Reserved in ATRAC and ATRAC2/3 formats 00 2 Sub-data-type for ATRAC-X bit 0 of Pa

49、 2 048 01 2, 10 2, 11 2 Reserved for sub-data-type in ATRAC-X 7-15 in accordance with IEC 61937-1 and IEC 61937-2 5 Format of ATRAC, ATRAC2/3 and ATRAC-X data-bursts 5.1 General This clause specifies the audio data-bursts ATRAC, ATRAC2/3 and ATRAC-X. Specific properties such as reference points, repetition period, the method of filling stream gaps, and decoding latency are specified for