IEC 61968-6-2015 Application integration at electric utilities - System interfaces for distribution management - Part 6 Interfaces for maintenance and construct.pdf

1、 IEC 61968-6 Edition 1.0 2015-07 INTERNATIONAL STANDARD Application integration at electric utilities System interfaces for distribution management Part 6: Interfaces for maintenance and construction IEC 61968-6:2015-07(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Ge

2、neva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in

3、 the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, ru

4、e de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. Abou

5、t IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the e

6、ntire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of c

7、riteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online a

8、nd also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electr

9、otechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC

10、TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 61968-6 Edition 1.0 2015-07 INTERNATIONAL STANDARD Application integration at ele

11、ctric utilities System interfaces for distribution management Part 6: Interfaces for maintenance and construction INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.200 ISBN 978-2-8322-2751-0 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained thi

12、s publication from an authorized distributor. colour inside 2 IEC 61968-6:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 8 2 Normative references 8 3 Terms, definitions and abbreviations . 9 3.1 Terms and definitions 9 3.2 Abbreviations 9 4 Reference and information models 9 4.1 Genera

13、l . 9 4.2 Reference model . 10 4.2.1 General . 10 4.2.2 Geographical Inventory (GINV) 12 4.2.3 Maintenance and Inspection (MAI) . 12 4.2.4 Construction 12 4.2.5 Design . 12 4.2.6 Work Scheduling and Dispatching (SCHD) . 12 4.2.7 Field Recording (FRD) . 12 4.2.8 Network Operation Simulation (SIM) 12

14、4.2.9 Customer Service (CS) 12 4.2.10 Trouble call management (TCM) 12 4.2.11 Financial (FIN) . 13 4.2.12 Human resources 13 4.2.13 Asset Management (AM) System . 13 4.2.14 Network Operations (NO). 13 4.3 Interface reference model . 13 4.4 Maintenance and construction functions and components . 14 4

15、.5 Static information model . 14 4.5.1 Information model classes . 14 4.5.2 Classes for maintenance and construction . 14 4.6 Maintenance and construction use cases 15 5 Maintenance and construction message types . 16 5.1 General . 16 5.2 Work . 17 5.3 Work request message . 17 5.3.1 General . 17 5.

16、3.2 Applications Carry out planned maintenance with temporary equipment 17 5.3.3 Message format . 19 5.4 Service order message . 20 5.4.1 General . 20 5.4.2 Applications Meter installation and removal 20 5.4.3 Message format . 21 5.5 Maintenance order message . 23 5.5.1 General . 23 5.5.2 Applicatio

17、ns . 23 5.5.3 Message format . 24 IEC 61968-6:2015 IEC 2015 3 6 Document conventions 26 6.1 UML diagrams. 26 6.2 Message definitions 26 6.2.1 General . 26 6.2.2 Mandatory versus optional . 26 Annex A (normative) Description of message type verbs 27 Annex B (normative) XML Schemas for Message Payload

18、s 29 B.1 General . 29 B.2 WorkRequest 29 B.3 ServiceOrder 50 B.4 MaintenanceOrder 91 Bibliography 143 Figure 1 Asset life cycle . 10 Figure 2 IEC 61968-6 reference model for maintenance . 11 Figure 3 End-to-end business cases and related messages . 16 Figure 4 Carry out planned maintenance with temp

19、orary equipment . 18 Figure 5 Work request message format 19 Figure 6 Meter installation and removal . 20 Figure 7 Service order message format 22 Figure 8 Maintenance of high voltage device (transformer etc) requested by FRD 24 Figure 9 MaintenanceOrder message format 25 Table 1 Document overview f

20、or IEC 61968-6 . 7 Table 2 Business functions and abstract components 14 Table 3 Maintenance and construction classes 15 Table A.1 Commonly used verbs 27 4 IEC 61968-6:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ APPLICATION INTEGRATION AT ELECTRIC UTILITIES SYSTEM INTERFACES FOR DISTRI

21、BUTION MANAGEMENT Part 6: Interfaces for maintenance and construction FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote interna

22、tional co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter

23、referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participa

24、te in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an int

25、ernational consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reas

26、onable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IE

27、C Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of confo

28、rmity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publicat

29、ion. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or

30、for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct

31、 application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. This part of International Standard IEC 61968 has been pr

32、epared by IEC technical committee 57: Power systems management and associated information exchange. The text of this standard is based on the following documents: FDIS Report on voting 57/1566/FDIS 57/1586/RVD Full information on the voting for the approval of this standard can be found in the repor

33、t on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 61968-6:2015 IEC 2015 5 A list of all parts in the IEC 61968 series, published under the general title Application integration at electric utilities System interfaces fo

34、r distribution management, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the pub

35、lication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for t

36、he correct understanding of its contents. Users should therefore print this document using a colour printer. 6 IEC 61968-6:2015 IEC 2015 INTRODUCTION The IEC 61968 standard, taken as a whole, defines interfaces for the major elements of an interface architecture for Distribution Management Systems (

37、DMS). IEC 61968-1, Interface architecture and general recommendations, identifies and establishes requirements for standard interfaces based on an Interface Reference Model (IRM). IEC 61968-3 to 9 of this standard define interfaces relevant to each of the major business functions described by the In

38、terface Reference Model. As used in IEC 61968, a DMS consists of various distributed application components for the utility to manage electrical distribution networks. These capabilities include monitoring and control of equipment for power delivery, management processes to ensure system reliability

39、, voltage management, demand-side management, outage management, work management, automated mapping and facilities management. This set of standards is limited to the definition of interfaces and is implementation independent. They provide for interoperability among different computer systems, platf

40、orms, and languages. Methods and technologies used to implement functionality conforming to these interfaces are considered outside of the scope of these standards; only the interface itself is specified in these standards. The purpose of this part of IEC 61968 is to define a standard for the integr

41、ation of Maintenance and Construction Systems (MC), which would include Work Management Systems, with other systems and business functions within the scope of IEC 61968. The scope of this standard is the exchange of information between Maintenance and Construction Systems and other systems within th

42、e utility enterprise. The specific details of communication protocols those systems employ are outside the scope of this standard. Instead, this standard will recognize and model the general capabilities that can be potentially provided by maintenance and construction systems including planned, unpl

43、anned and conditional maintenance. In this way, this standard will not be impacted by the specification, development and/or deployment of next generation maintenance systems, either through the use of standards or proprietary means. The IEC 61968 series of standards is intended to facilitate inter-a

44、pplication integration as opposed to intra-application integration. Intra-application integration is aimed at programs in the same application system, usually communicating with each other using middleware that is embedded in their underlying runtime environment, and tends to be optimised for close,

45、 real- time, synchronous connections and interactive request/reply or conversation communication models. IEC 61968, by contrast, is intended to support the inter-application integration of a utility enterprise that needs to connect disparate applications that are already built or new (legacy or purc

46、hased applications), each supported by dissimilar runtime environments. Therefore, these interface standards are relevant to loosely coupled applications with more heterogeneity in languages, operating systems, protocols and management tools. This series of standards is intended to support applicati

47、ons that need to exchange data every few seconds, minutes, or hours rather than waiting for a nightly batch run. This series of standards, which are intended to be implemented with middleware services that exchange messages among applications, will complement, not replace, utility data warehouses, d

48、atabase gateways, and operational stores. As used in IEC 61968, a Distribution Management System (DMS) consists of various distributed application components for the utility to manage electrical distribution networks. These capabilities include monitoring and control of equipment for power delivery,

49、 management processes to ensure system reliability, voltage management, demand-side management, outage management, work management, automated mapping and facilities management. Standard interfaces are defined for each class of applications identified in the Interface Reference Model (IRM), which is described in IEC 61968-1, Interface architecture and general recommendations. IEC 61968-6:2015 IEC 2015 7 This part of IEC 61968 contains the clauses listed in Table 1. Table 1 D