IEC 62007-1-2015 Semiconductor optoelectronic devices for fibre optic system applications - Part 1 Specification template for essential ratings and characterist.pdf

1、 IEC 62007-1 Edition 3.0 2015-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Semiconductor optoelectronic devices for fibre optic system applications Part 1: Specification template for essential ratings and characteristics Dispositifs optolectroniques semiconducteurs pour application dans les systme

2、s fibres optiques Partie 1: Modle de spcification relatif aux valeurs et caractristiques essentielles IEC 62007-1:2015-03(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reprodu

3、ced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaini

4、ng additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soi

5、t et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilis

6、ez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the le

7、ading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corri

8、genda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Andr

9、oid Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore

10、.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 3

11、0 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from

12、 the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, p

13、lease contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos d

14、es publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bi

15、bliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisan

16、t diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publicat

17、ions parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues

18、additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus c

19、ertaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62007-1 Edition 3.0 2015-03 INTERNATIONAL STA

20、NDARD NORME INTERNATIONALE Semiconductor optoelectronic devices for fibre optic system applications Part 1: Specification template for essential ratings and characteristics Dispositifs optolectroniques semiconducteurs pour application dans les systmes fibres optiques Partie 1: Modle de spcification

21、relatif aux valeurs et caractristiques essentielles INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS: 31.080.01; 31.260; 33.180.01 ISBN 978-2-83222-589-9 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electr

22、otechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 62007-1:2015 IEC 2015 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references. 7 3 Ter

23、ms, definitions and abbreviations 7 3.1 Terms and definitions 7 3.2 Abbreviations 9 4 LEDs for fibre optic systems or subsystems 9 4.1 Type . 9 4.2 Semiconductor materials . 9 4.3 Details of outline and encapsulation 9 4.4 Limiting values (absolute maximum ratings) over the operating temperature ran

24、ge, unless otherwise stated 10 4.5 Electrical and optical characteristics 10 4.6 Supplementary information 11 5 Laser module with pigtails 12 5.1 Type . 12 5.2 Semiconductor 12 5.2.1 Materials 12 5.2.2 Structure 12 5.3 Details of outline and encapsulation 12 5.4 Limiting values (absolute maximum rat

25、ings) over the operating temperature range, unless otherwise stated 13 5.4.1 General conditions . 13 5.4.2 Laser diode 13 5.4.3 Photodiode 13 5.4.4 Thermal sensor (where appropriate) . 13 5.4.5 Thermoelectric cooler (where appropriate) 14 5.5 Electric and optical characteristics . 14 5.6 Supplementa

26、ry information 15 5.7 Hazards 16 6 PIN photodiodes for fibre optic systems or subsystems . 16 6.1 Type . 16 6.2 Semiconductor materials . 16 6.3 Details of outline and encapsulation 16 6.4 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated 17 6.5

27、 Electrical and optical characteristics 18 6.6 Supplementary information 18 7 Avalanche photodiodes (APDs) with or without pigtails . 19 7.1 Type . 19 7.2 Semiconductor 19 7.3 Details of outline and encapsulation 19 7.4 Limiting values (absolute maximum ratings) over the operating temperature range,

28、 unless otherwise stated 19 7.5 Electrical and optical characteristics 19 7.6 Supplementary information 20 8 PIN-TIA modules for fibre optic systems or subsystems 21 IEC 62007-1:2015 IEC 2015 3 8.1 Type . 21 8.2 Semiconductor materials . 21 8.3 Structure . 21 8.4 Details of outline and encapsulation

29、 21 8.5 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated 22 8.6 Operating conditions at T amb= 25 C, unless otherwise stated . 22 8.7 Electrical and optical characteristics 23 8.8 Supplementary information 23 9 APD-TIA modules for fibre optic s

30、ystems or subsystems . 24 9.1 Type . 24 9.2 Semiconductor materials . 24 9.3 Structure . 24 9.4 Details of outline and encapsulation 24 9.5 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated 24 9.6 Electrical and optical characteristics 25 10 Las

31、er diode modules for pumping an optical fibre amplifier . 26 10.1 Type . 26 10.2 Semiconductor materials . 26 10.3 Structure . 26 10.4 Details of outline and encapsulation 26 10.5 Limiting values (absolute maximum ratings) over the operating temperature range, unless otherwise stated 27 10.6 Electri

32、cal and optical characteristics 27 10.7 Supplementary information 29 10.8 Hazards 29 11 Optical modulators for digital fibre optic applications 29 11.1 Type . 29 11.2 Materials . 29 11.3 Structure . 29 11.4 Details of outline and encapsulation 30 11.5 Limiting values (absolute maximum ratings) . 30

33、11.6 Electrical and optical characteristics 31 11.7 Supplementary information 32 11.8 Hazards 32 Bibliography . 33 Table 1 Limiting values for LEDs 10 Table 2 Electrical and optical characteristics for LEDs 11 Table 3 Electric and optical characteristics for laser modules with pigtails . 14 Table 4

34、Limiting values for PIN photodiodes . 17 Table 5 Electrical and optical characteristics for PIN photodiodes . 18 Table 6 Electrical and optical characteristics for avalanche photodiodes (APDs) with or without pigtails 20 Table 7 Limiting values for PIN-TIA modules 22 Table 8 Operating conditions for

35、 PIN-TIA modules 22 Table 9 Electrical and optical characteristics for PIN-TIA modules . 23 4 IEC 62007-1:2015 IEC 2015 Table 10 Limiting values for APD-TIA modules . 25 Table 11 Electrical and optical characteristics for APD-TIA modules . 25 Table 12 Limiting values for laser diode modules for pump

36、ing an optical fibre amplifier . 27 Table 13 Electrical and optical characteristics for laser diode modules for pumping an optical fibre amplifier 28 Table 14 Limiting values for optical modulators for digital fibre optic applications 30 Table 15 Electrical and optical characteristics for optical mo

37、dulators for digital fibre optic applications 31 IEC 62007-1:2015 IEC 2015 5 COMMISSION LECTROTECHNIQUE INTERNATIONALE _ SEMICONDUCTOR OPTOELECTRONIC DEVICES FOR FIBRE OPTIC SYSTEM APPLICATIONS Part 1: Specification template for essential ratings and characteristics FOREWORD 1) The International Ele

38、ctrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields

39、. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC N

40、ational Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardizatio

41、n (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representat

42、ion from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC canno

43、t be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications

44、. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, acce

45、ss to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including indi

46、vidual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon,

47、 this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of

48、 this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62007-1 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. T

49、his third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. 1) The definitions of some symbols and terms are revised in order to harmonize them with those in other SC 86C documents. 2) A clause on APD-TIA has been added. 6 IEC 62007-1:2015 I