IEC 62148-17-2013 Fibre optic active components and devices - Package and interface standards - Part 17 Transmitter and receiver components with dual coaxial RF.pdf

1、 IEC 62148-17 Edition 1.0 2013-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic active components and devices Package and interface standards Part 17: Transmitter and receiver components with dual coaxial RF connectors Composants et dispositifs actifs fibres optiques Normes de boitiers et

2、dinterface Partie 17: Composants metteurs et rcepteurs munis de connecteurs coaxiaux RF doubles IEC62148-17:2013 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized

3、in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional ri

4、ghts to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun p

5、rocd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coo

6、rdonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading gl

7、obal organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or

8、 an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn public

9、ations. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and e

10、lectrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on thi

11、s publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectroniq

12、ue et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec

13、.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez

14、 inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus d

15、e 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication

16、ou si vous avez des questions contactez-nous: csciec.ch. IEC 62148-17 Edition 1.0 2013-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic active components and devices Package and interface standards Part 17: Transmitter and receiver components with dual coaxial RF connectors Composants et d

17、ispositifs actifs fibres optiques Normes de boitiers et dinterface Partie 17: Composants metteurs et rcepteurs munis de connecteurs coaxiaux RF doubles INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE N ICS 33.180.99 PRICE CODE CODE PRIX ISBN 978-2-8322-1108-3 Reg

18、istered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distri

19、buteur agr. 2 62148-17 IEC:2013 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Abbreviations . 5 4 Electromagnetic compatibility (EMC) requirements . 5 5 Classification 6 6 Specification of transmitter component with dual coaxial RF connectors . 6 6.1 General . 6 6.2 Pigtail interfac

20、e . 6 6.3 Electrical interface . 6 6.3.1 General . 6 6.3.2 Numbering of electrical terminals . 6 6.3.3 Coaxial connector 7 6.3.4 Electrical terminal assignment . 7 6.4 Package outline and footprint 8 6.4.1 Drawing of package outline 8 6.4.2 Drawing of footprint . 10 7 Specification of receiver compo

21、nent with dual coaxial RF connectors . 10 7.1 General . 10 7.2 Pigtail interface . 11 7.3 Electrical interface . 11 7.3.1 General . 11 7.3.2 Numbering of electrical terminals . 11 7.3.3 Coaxial connector 11 7.3.4 Electrical terminal assignment . 11 7.4 Package outline and footprint 12 7.4.1 Drawing

22、of package outline 12 7.4.2 Drawing of footprint . 13 Bibliography 15 Figure 1 Electrical terminal numbering assignments for transmitter component with dual coaxial RF connectors . 6 Figure 2 Coaxial RF connector interface 7 Figure 3 Package outline drawing 9 Figure 4 Recommended pattern layout for

23、the PCB 10 Figure 5 Electrical terminal numbering assignments for receiver component with dual coaxial RF connectors 11 Figure 6 Package outline . 13 Figure 7 Recommended pattern layout for the PCB 14 Table 1 Terminal function definitions 8 Table 2 Terminal function definitions 12 62148-17 IEC:2013

24、3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PACKAGE AND INTERFACE STANDARDS Part 17: Transmitter and receiver components with dual coaxial RF connectors FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standar

25、dization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Inter

26、national Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate

27、 in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between t

28、he two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications ha

29、ve the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any mis

30、interpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding nati

31、onal or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services

32、carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National

33、 Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is dr

34、awn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall no

35、t be held responsible for identifying any or all such patent rights. International Standard IEC 62148-17 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. This standard is to be read in conjunction with IEC 62148-1. The text o

36、f this standard is based on the following documents: FDIS Report on voting 86C/1165/FDIS 86C/1186/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC D

37、irectives, Part 2. A list of all parts of the IEC 62148 series, published under the general title Fibre optic active components and devices Package and interface standards, can be found on the IEC website. 4 62148-17 IEC:2013 The committee has decided that the contents of this publication will remai

38、n unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 62148-17 IEC:2013 5 FIBRE OPTIC ACTIVE COMPONENTS

39、 AND DEVICES PACKAGE AND INTERFACE STANDARDS Part 17: Transmitter and receiver components with dual coaxial RF connectors 1 Scope This part of IEC 62148 covers physical interface specification of transmitter and receiver components with dual coaxial RF connectors. 2 Normative references The followin

40、g documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-2-50, Opt

41、ical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 60874-1, Fibre optic interconnecting devices and passive components Connectors for optical fibres and cables Part 1: Generic specification IEC 62148-1, Fibre optic active components and devices P

42、ackage and interface standards Part 1: General and guidance IEC Guide 107, Electromagnetic compatibility Guide to the drafting of electromagnetic compatibility publications 3 Abbreviations For the purposes of this document, the following abbreviations apply. EMwL External modulator with laser diode

43、LD Laser diode PD Photo diode PCB Printed circuit board PIN PD Photo diode with PIN structure SMPM Sub-miniature push-on miniature TEC Thermo-electric cooler TIA Trans-impedance amplifier 4 Electromagnetic compatibility (EMC) requirements The components specified in this part of IEC 62148 shall comp

44、ly with suitable requirements for electromagnetic compatibility (in terms of both emission and immunity), depending on particular usage/environment in which they are intended to be installed or integrated. 6 62148-17 IEC:2013 Guidance to the drafting of such EMC requirements is provided in IEC Guide

45、 107. Guidance for electrostatic discharge (ESD) is still under study. 5 Classification The transmitter and receiver components with dual coaxial RF connectors described in this standard are classified as type 5 according to the definitions of IEC 62148-1. 6 Specification of transmitter component wi

46、th dual coaxial RF connectors 6.1 General The intention of this clause is to specify adequately the physical requirements of an optical transmitter component with an EMwL, a modulator driver IC, a TEC and dual coaxial RF input connectors. It will enable mechanical interchangeability of components co

47、mplying with this specification both for the PCB and for any panel mounting requirement. 6.2 Pigtail interface All optical fibres defined in IEC 60793-2-50 are applicable. All optical connectors defined in IEC 60874-1 are applicable if a pigtail is to be terminated with an optical connector. 6.3 Ele

48、ctrical interface 6.3.1 General The electrical interface in this specification defines only the basic functionality of each pin. 6.3.2 Numbering of electrical terminals Terminal numbering assignments are shown in Figure 1. Pin 8 Pin 14 RF1 Optical fibre Pin 7 Pin 1 RF2 IEC 2397/13 Figure 1 Electrica

49、l terminal numbering assignments for transmitter component with dual coaxial RF connectors 62148-17 IEC:2013 7 6.3.3 Coaxial connector The transmitter component has male type coaxial connectors as RF1 and RF2 terminals. The connector can handle RF electrical signals and is compatible with the SMPM connector, which is defined in Figure 2. NOTE If the SMPM connector is standardized in IEC, the ref