IEC 62386-203-2009 Digital addressable lighting interface - Part 203 Particular requirements for control gear - Discharge lamps (excluding fluorescent lamps) (d.pdf

1、 IEC 62386-203 Edition 1.0 2009-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Digital addressable lighting interface Part 203: Particular requirements for control gear Discharge lamps (excluding fluorescent lamps) (device type 2) Interface dclairage adressable numrique Partie 203: Exigences particu

2、lires pour les appareillages de commande Lampes dcharge ( lexclusion des lampes fluorescentes) (dispositifs de type 2) IEC 62386-203:2009 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may b

3、e reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry abou

4、t obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme q

5、ue ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publ

6、ication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global o

7、rganization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an am

8、endment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Publish

9、ed: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containi

10、ng more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need f

11、urther assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pou

12、r tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue

13、 des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Jus

14、t Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de

15、 termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_e

16、ntry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62386-203 Edition 1.0 2009-06 INTERNATIONAL STANDARD NORME INTERNATIONALE

17、Digital addressable lighting interface Part 203: Particular requirements for control gear Discharge lamps (excluding fluorescent lamps) (device type 2) Interface dclairage adressable numrique Partie 203: Exigences particulires pour les appareillages de commande Lampes dcharge ( lexclusion des lampes

18、 fluorescentes) (dispositifs de type 2) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE U ICS 29.140.50; 29.140.99 PRICE CODE CODE PRIX ISBN 2-8318-1040-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrot

19、echnique Internationale 2 62386-203 IEC:2009 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms and definitions .6 4 General 7 5 Electrical specifications 7 6 Interface power supply .7 7 Transmission protocol structure7 8 Timing 7 9 Method of operation .7 10 Declaration o

20、f variables8 11 Definition of commands 9 12 Test procedures .13 Annex A (informative) Examples 25 Bibliography26 Figure 1 Example of the use of the “Arc Power At Requested Value“ bit 8 Figure 2 Application extended control or configuration command sequence example 9 Figure 3 Test sequence “Physical

21、selection supported”14 Figure 4 Test sequence START IDENTIFICATION .15 Figure 5 Test sequence MAINS VOLTAGE TOO LOW16 Figure 6 Test sequence MAINS VOLTAGE TOO HIGH .17 Figure 7 LAMP VOLTAGE OUT OF SPECIFICATION .18 Figure 8 QUERY WAITING FOR IGNITION, IGNITION TIME OUT19 Figure 9 QUERY CYCLING FAIL

22、20 Figure 10 QUERY THERMAL OVERLOAD21 Figure 11 QUERY HID STATUS .22 Figure 12 QUERY EXTENDED VERSION NUMBER .23 Figure 13 RESERVED APPLICATION EXTENDED COMMANDS24 Table 1 - Declaration of additional variables .9 Table 2 Summary of the application extended command set 13 62386-203 IEC:2009 3 INTERNA

23、TIONAL ELECTROTECHNICAL COMMISSION _ DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 203: Particular requirements for control gear Discharge lamps (excluding fluorescent lamps) (device type 2) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization

24、 comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International

25、 Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this

26、 preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two

27、organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the

28、form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpr

29、etation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or

30、 regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of thi

31、s publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or ind

32、irect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for t

33、he correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62386-203 has been p

34、repared by subcommittee 34C: Auxiliaries for lamps, of IEC technical committee 34: Lamps and related equipment. The text of this standard is based on the following documents: FDIS Report on voting 34C/875/FDIS 34C/884/RVD Full information on the voting for the approval of this standard can be found

35、in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 62386-203 IEC:2009 This Part 203 is intended to be used in conjunction with IEC 62386-101 and IEC 62386-102, which contain general requirements for the relevan

36、t product type (control gear or control devices). A list of all parts of IEC 62386 series, under the general title Digital addressable lighting interface, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance resu

37、lt date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition; or amended. 62386-203 IEC:2009 5 INTRODUCTION This first edition of IEC 62386-203 is publi

38、shed in conjunction with IEC 62386-101 and IEC 62386-102. The division of IEC 62386 into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognised. This International Standard, and the other parts

39、that make up the IEC 62386-200 series, in referring to any of the clauses of IEC 62386-101 or IEC 62386-102, specify the extent to which such a clause is applicable and the order in which the tests are to be performed. The parts also include additional requirements, as necessary. All parts which mak

40、e up the IEC 62386-200 series are self-contained and therefore do not include references to each other. Where the requirements of any of the clauses of IEC 62386-101 or IEC 62386-102 are referred to in this International Standard by the sentence “The requirements of IEC 62386- 1XX, clause n apply”,

41、this sentence is to be interpreted as meaning that all requirements of the clause in question of Part 101 or Part 102 apply, except any which are clearly inapplicable to the specific type of lamp control gear covered by Part 203. All numbers used in this International Standard are decimal numbers un

42、less otherwise noted. Hexadecimal numbers are given in the format 0xVV, where VV is the value. Binary numbers are given in the format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1; x in binary numbers means dont care. 6 62386-203 IEC:2009 DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 203: Pa

43、rticular requirements for control gear Discharge lamps (excluding fluorescent lamps) (device type 2) 1 Scope This International Standard specifies a protocol and test procedures for the control of electronic control gear by digital signals used on a.c. or d.c. supplies, associated with discharge lam

44、ps (excluding fluorescent lamps). NOTE Tests in this standard are type tests. Requirements for testing individual control gear during production are not included. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, o

45、nly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62386-101:2009, Digital addressable lighting interface Part 101: General requirements; System IEC 62386-102:2009, Digital addressable lighting interface Part 1

46、02: General requirements Control gear 3 Terms and definitions For the purposes of this document, the terms and definitions given in Clause 3 of IEC 62386- 101:2009 and Clause 3 of IEC 62386-102:2009 apply, with the following additional terms and definitions. 3.1 lamp cycling periodic igniting and ex

47、tinguishing of the lamp 3.2 lamp failure lamp parameter outside of the tolerances for the normal lamp operation NOTE The number of attempts to ignite the lamp parameter before final switching off is control gear dependent. 3.3 run-up time time which the system of control gear and lamp(s) needs to se

48、t the lamp output power to its nominal lamp power value after switching on the lamp 3.4 waiting for ignition control gear status with ignition function maximal up to the ignition time out without lamp ignition 62386-203 IEC:2009 7 3.5 ignition time out status of the control gear after an inefficient

49、 ignition time NOTE The time is specified by the control gear manufacturer. 3.6 arc power at requested value lamp(s) status with the requested arc power 4 General The requirements of Clause 4 of IEC 62386-101:2009 and Clause 4 of IEC 62386-102:2009 apply. 5 Electrical specifications The requirements of Clause 5 of IEC 62386-101:2009 and Clau