IEC 62802-2017 Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in high-frequency radio on fibre (RoF).pdf

1、 IEC 62802 Edition 1.0 2017-07 INTERNATIONAL STANDARD Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in high-frequency radio on fibre (RoF) systems IEC 62802:2017-07(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 I

2、EC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Commit

3、tee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11

4、 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies

5、. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting

6、 the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variet

7、y of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on

8、line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotec

9、hnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86

10、and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62802 Edition 1.0 2017-07 INTERNATIONAL STANDARD Measurement methods of a half-wavelength volta

11、ge and a chirp parameter for Mach-Zehnder optical modulators in high-frequency radio on fibre (RoF) systems INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.060.20; 33.180.99 ISBN 978-2-8322-4609-2 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obta

12、ined this publication from an authorized distributor. colour inside 2 IEC 62802:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 8 2 Normative references 8 3 Terms, definitions and abbreviated terms 8 3.1 Terms and definitions 8 3.2 Abbreviated terms . 10 4 Electro-optic material-based M

13、ach-Zehnder optical modulators . 10 4.1 Mach-Zehnder optical modulators . 10 4.1.1 Component parts . 10 4.1.2 Structure . 10 4.2 Requirements for MZMs 11 4.2.1 General . 11 4.2.2 Substrate material . 11 4.2.3 Optical waveguide design 11 5 Sampling for quality control . 11 5.1 Sampling. 11 5.2 Sampli

14、ng frequency 11 6 Measurement method of a half wavelength voltage 11 6.1 Circuit diagram . 11 6.2 Measurement conditions . 12 6.2.1 Temperature and environment . 12 6.2.2 Warming-up of measurement equipment 12 6.3 Principle of measurement method . 13 6.3.1 General . 13 6.3.2 Mathematical expressions

15、 of basic measurement principle 13 6.3.3 Principle of half-wavelength voltage and chirp parameter with fixed DC-bias condition (method A) 14 6.3.4 Principle of half-wavelength voltage and chirp parameter using DC-bias sweep (method B) 14 6.3.5 Principle of half-wavelength voltage and chirp parameter

16、 using minimum transmission bias and maximum transmission bias (method C) 15 6.4 Measurement procedure . 15 6.4.1 Method A . 15 6.4.2 Method B . 16 6.4.3 Method C . 16 Annex A (informative) Measurement methods for parallel integrated Mach-Zehnder modulators 18 A.1 General . 18 A.2 Examples 18 A.2.1

17、Quad parallel Mach-Zehnder modulators . 18 A.2.2 Dual parallel Mach-Zehnder modulators with four RF electrodes 20 Bibliography 22 Figure 1 Transfer curve of a Mach-Zehnder optical modulator 9 Figure 2 Optical phase retardations . 10 IEC 62802:2017 IEC 2017 3 Figure 3 Circuit diagram . 12 Figure A.1

18、Optical sideband generation from a sub-MZM element in a parallel MZM 19 Figure A.2 Halfwave voltages of sub-MZMs of a quad parallel MZM . 19 Figure A.3 Chirp parameters of sub-MZMs of a quad parallel MZM 20 Figure A.4 Structure of dual parallel Mach-Zehnder modulators with four RF electrodes 20 4 IE

19、C 62802:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MEASUREMENT METHODS OF A HALF-WAVELENGTH VOLTAGE AND A CHIRP PARAMETER FOR MACH-ZEHNDER OPTICAL MODULATORS IN HIGH-FREQUENCY RADIO ON FIBRE (ROF) SYSTEMS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide o

20、rganization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activiti

21、es, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dea

22、lt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined

23、 by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.

24、 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they

25、are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and

26、 the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not respon

27、sible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical comm

28、ittees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publicati

29、ons. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of pate

30、nt rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62802 has been prepared by IEC technical committee 103: Transmitting equipment for radiocommunication. The text of this International Standard is based on the following documents: C

31、DV Report on voting 103/131/CDV 103/161/RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 62802:2017 IEC 2017 5 Th

32、e committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition,

33、 or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print

34、this document using a colour printer. 6 IEC 62802:2017 IEC 2017 INTRODUCTION A variety of microwave/millimeter-wave-photonic devices are useful for wireless communication and broadcasting systems. An optical modulator is an interface which converts an electronic signal to an optical signal. In the f

35、ield of optical fibre communication systems, the IEC 62007 series was published in 1999. Microwave/millimeter-wave RoF systems are comprised mainly of two parts: one is RF to photonic converter (E/O), and the other is photonic to RF converter (O/E). Radio waves are converted into an optical signal a

36、t E/O. This signal is transferred through the optical fibre and then the radio waves are regenerated at O/E. A variety of photonic devices that carry microwave and millimeter-wave signals as subcarrier frequencies are used for high-frequency RoF systems. In particular, the Mach-Zehnder optical modul

37、ator (MZM) plays an important role to convert electronic (high-frequency above millimeter-wave) signal to optical signal. In high-frequency RoF systems, specifications of drive voltages, chirp characteristics, inter-modulation distortion of the modulators have been the important technical parameters

38、. This document is prepared to provide the measurement method of MZMs to the industry for evaluating electro-optic material of the modulators to be used in high-frequency RoF systems. This document defines the measurement methods of a half-wavelength voltage and a chirp parameter, which have a signi

39、ficant impact on the performance of RoF systems. Additionally, these methods are also used for the estimation of the intermodulation distortions and transmission performances. The half-wavelength voltage and the chirp parameter can be measured at the same time using the methods defined in this docum

40、ent. The nonlinear distortion characteristics are also important for the performance of the systems. The intermodulation distortion of the MZM is calculated from the driving voltage and the half-wavelength voltage. The detailed explanations and calculation method of intermodulation distortions from

41、the normalized optical modulation index (NOMI) are described in IEC PAS 62593:20081 1 , Annex B. The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of patents concerning: a) a method for characteri

42、zation of optical modulator, and method for controlling high frequency oscillator using the same (JP 3538619B), b) a method and apparatus for measurement of characteristic of optical modulator (JP 3866082B), c) a method for evaluating characteristic of optical modulator having Mach-Zehnder interfero

43、meter (WO 2011-027409), d) a method of measuring half-wave voltage of optical modulator (JP 2009-229926A). Details pertaining to the patent holders and the locations where the patents are referred to in the document are given in Table 1. _ 1 Numbers in square brackets refer to the Bibliography. IEC

44、62802:2017 IEC 2017 7 Table 1 Patents present in this document Related clause Patent holder Patent number Clause 6 Annex A (informative) National Institute of Information and Communications Technology JP 3538619 6.4.3 National Institute of Information and Communications Technology Sumitomo Osaka Cem

45、ent Co., Ltd. JP 3866082 A.2.1 National Institute of Information and Communications Technology Sumitomo Osaka Cement Co., Ltd. (WO 2011-027409) EP 2477021A US 8867042 CN 102575971 JP 5622154 A.2.2 Sumitomo Osaka Cement Co., Ltd. (JP2009-229926A) JP 4991610 IEC takes no position concerning the eviden

46、ce, validity and scope of these patent rights. The holders of these patent rights have assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holders of thes

47、e patent rights are registered with IEC. Information may be obtained from: National Institute of Information and Communications Technology 4-2-1 Nukui-Kitamachi, Koganei, Tokyo 184-8795, Japan Sumitomo Osaka Cement Co., Ltd. 6-28 Rokubancho, Chiyoda-Ku, Tokyo 102-8465, Japan. Attention is drawn to t

48、he possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights. ISO (www.iso.org/patents) and IEC (http:/patents.iec.ch) maintain on-line data bases of pa

49、tents relevant to their standards. Users are encouraged to consult the databases for the most up-to-date information concerning patents. 8 IEC 62802:2017 IEC 2017 MEASUREMENT METHODS OF A HALF-WAVELENGTH VOLTAGE AND A CHIRP PARAMETER FOR MACH-ZEHNDER OPTICAL MODULATORS IN HIGH-FREQUENCY RADIO ON FIBRE (ROF) SYSTEMS 1 Scope This document specifies measurement methods of a half-wavelength voltage and a chirp parameter applicable to MZMs in microwave and millimeter-wave RoF systems. In add