IEC 63044-5-3-2017 Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 5-3 EMC requirements for HBES BACS used.pdf

1、 IEC 63044-5-3 Edition 1.0 2017-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Home and building electronic systems (HBES) and building automation and control systems (BACS) Part 5-3: EMC requirements for HBES/BACS used in industrial environments Systmes lectroniques pour les foyers domestiques et l

2、es btiments (HBES) et systmes de gestion technique du btiment (SGTB) Partie 5-3: Exigences CEM relatives aux HBES/SGTB destins tre utiliss en environnement industriel IEC 63044-5-3:2017-01(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unl

3、ess otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have

4、 any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publicat

5、ion ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsi

6、rez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About th

7、e IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by

8、the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Te

9、chnical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects,

10、 replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online d

11、ictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminolo

12、gy entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on

13、 this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectron

14、ique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application aut

15、onome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance per

16、met de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC

17、. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que

18、 les termes quivalents dans 16 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications

19、 IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 63044-5-3 Edit

20、ion 1.0 2017-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Home and building electronic systems (HBES) and building automation and control systems (BACS) Part 5-3: EMC requirements for HBES/BACS used in industrial environments Systmes lectroniques pour les foyers domestiques et les btiments (HBES)

21、et systmes de gestion technique du btiment (SGTB) Partie 5-3: Exigences CEM relatives aux HBES/SGTB destins tre utiliss en environnement industriel INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.120.01; 29.120.99 ISBN 978-2-8322-3776-2 Registered trademar

22、k of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IE

23、C 63044-5-3:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions and abbreviated terms 6 4 General requirements 7 5 Performance criteria 7 6 Standard test conditions 7 7 EMC requirements . 7 7.1 Immunity requirements 7 7.2 Emission requirements

24、 8 Table 1 EMC immunity requirements for HBES/BACS network ports 8 IEC 63044-5-3:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) Part 5-3: EMC requirements for HBES/BACS used in industrial envi

25、ronments FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardizati

26、on in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is en

27、trusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Int

28、ernational Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects sinc

29、e each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content

30、of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible i

31、n their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity as

32、sessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, em

33、ployees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of

34、the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to th

35、e possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 63044-5-3 has been prepared by IEC technical committee 23: Electrical accessories. The text

36、 of this standard is based on the following documents: CDV Report on voting 23/738/CDV 23/750/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Direc

37、tives, Part 2. 4 IEC 63044-5-3:2017 IEC 2017 This International Standard is to be used in conjunction with IEC 63044-5-1:2017. A list of all parts in the IEC 63044 series, published under the general title Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)

38、, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfir

39、med, withdrawn, replaced by a revised edition, or amended. IEC 63044-5-3:2017 IEC 2017 5 INTRODUCTION The IEC 63044 series deals with developing and testing Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS). The IEC 63044-5 series ensures a common level o

40、f EMC requirements for HBES/BACS devices. 6 IEC 63044-5-3:2017 IEC 2017 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) Part 5-3: EMC requirements for HBES/BACS used in industrial environments 1 Scope Clause 1 of IEC 63044-5-1:2017 applies, with the fol

41、lowing modification: Replace the fourthparagraph with the following: This document specifies EMC requirements for HBES/BACS to be installed in industrial environments, according to the definition given in IEC 61000-6-2. NOTE Industrial environment covers the office spaces that may be present in indu

42、strial premises. Industrial automation systems are outside the scope. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undate

43、d references, the latest edition of the referenced document (including any amendments) applies. IEC 63044-5-1, Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-1: EMC requirements, conditions and test set-up IEC 61000-4-4, Electromagnetic compatib

44、ility (EMC) Part 4-4: Testing and measurement techniques Electrical fast transient/burst immunity test IEC 61000-4-5, Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test IEC 61000-4-6, Electromagnetic compatibility (EMC) Part 4-6: Testing and measurem

45、ent techniques Immunity to conducted disturbances, induced by radio-frequency fields IEC 61000-6-2, Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity standard for industrial environments IEC 61000-6-4, Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission st

46、andard for industrial environments 3 Terms, definitions and abbreviated terms For the purposes of this document, the terms, definitions and abbreviations given in IEC 63044-5-1 apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC 63044-5-3:2

47、017 IEC 2017 7 IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 4 General requirements Clause 4 of IEC 63044-5-1:2017 applies. 5 Performance criteria Clause 5 of IEC 63044-5-1:2017 applies. 6 Standard test conditions Clause 6

48、 of IEC 63044-5-1:2017 applies. 7 EMC requirements 7.1 Immunity requirements For products used in industrial environments, the immunity requirements of the generic standard IEC 61000-6-2 apply to enclosure, AC/DC power and I/O signal ports. The performance criteria and the test set-ups are defined i

49、n IEC 63044-5-1. Test levels for HBES/BACS network ports are specified in Table 1. 8 IEC 63044-5-3:2017 IEC 2017 Table 1 EMC immunity requirements for HBES/BACS network ports Phenomenon Basic standard Test specification Performance criterion gRemarks Radio-frequency common mode IEC 61000-4-6 (0,15 to 80) MHz 80 % AM (1 kHz) a,c,d 10 V A bFast transients (bursts) IEC 61000-4-4 t r /