IEC TR 61496-4-2007 Safety of machinery - Electro-sensitive protective equipment - Part 4 Particular requirements for equipment using vision based protective de.pdf

1、 TECHNICAL REPORT IECCEIRAPPORT TECHNIQUE TR 61496-4First editionPremire dition2007-07Safety of machinery Electro-sensitive protective equipment Part 4: Particular requirements for equipment using vision based protective devices (VBPD) Scurit des machines Equipements de protection lectro-sensibles P

2、artie 4: Exigences particulires pour les quipements utilisant des dispositifs protecteurs par vision (VBPD) Reference number Numro de rfrence IEC/CEI/TR 61496-4:2007 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no pa

3、rt of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyr

4、ight or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni

5、utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits s

6、upplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (

7、IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest ed

8、ition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced pu

9、blications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedb

10、ack on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publ

11、ie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendem

12、ent peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publi

13、cations retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Service Clients: www.iec.ch/webstore/custserv/

14、custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 TECHNICAL REPORT IECCEIRAPPORT TECHNIQUE TR 61496-4First editionPrem

15、ire dition2007-07Safety of machinery Electro-sensitive protective equipment Part 4: Particular requirements for equipment using vision based protective devices (VBPD) Scurit des machines Equipements de protection lectro-sensibles Partie 4: Exigences particulires pour les quipements utilisant des dis

16、positifs protecteurs par vision (VBPD) PRICE CODE CODE PRIX T For price, see current cataloguePour prix, voir catalogue en vigueur Commission Electrotechnique InternationaleInternational Electrotechnical Commission 2 TR 61496-4 IEC:2007 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative refere

17、nces6 3 Terms and definitions .7 4 Functional, design and environmental requirements 8 4.1 Functional requirements 8 4.2 Design requirements11 4.3 Environmental requirements 13 5 Testing .14 5.1 General .14 5.2 Functional tests .15 5.4 Environmental tests .19 6 Marking for identification and safe us

18、e 23 6.1 General .24 7 Accompanying documents 24 Figure 1 Side view of VBPD using a passive pattern .9 Figure 2 Examples of circular disc test pieces according to 4.2.13.3 .10 Figure 3 Lux measurement setup at indirect light tests22 Table 1 Verification of detection capability requirements (see also

19、 4.2.12) 16 TR 61496-4 IEC:2007 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SAFETY OF MACHINERY ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT Part 4: Particular requirements for equipment using vision based protective devices (VBPD) FOREWORD 1) The International Electrotechnical Commission (IEC) is a wor

20、ldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other

21、activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the sub

22、ject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions de

23、termined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Com

24、mittees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in whi

25、ch they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publica

26、tion and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure th

27、at they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any na

28、ture whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenc

29、ed publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main

30、task of IEC technical committees is to prepare International Standards. However, a technical committee may propose the publication of a technical report when it has collected data of a different kind from that which is normally published as an International Standard, for example “state of the art“.

31、IEC 61496-4, which is a technical report, has been prepared by IEC technical committee 44: Safety of machinery Electrotechnical aspects, in collaboration with CENELEC technical committee 44X: Safety of machinery Electrotechnical aspects 4 TR 61496-4 IEC:2007 The text of this technical report is base

32、d on the following documents: Enquiry draft Report on voting 44/536/DTR 44/545/RVC Full information on the voting for the approval of this technical report can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives,

33、Part 2. This technical report constitutes Part 4 of the IEC 61496 series and is intended to be read in conjunction with IEC 61496-1. When a particular clause or subclause of IEC 61496-1 is not mentioned in this technical report, that clause or subclause applies as far as is reasonable. Where this te

34、chnical report states “addition“, “modification“ or “replacement“, the relevant text of IEC 61496-1 is to be adapted accordingly. A list of all the parts of IEC 61496, under the general title Safety of machinery Electro-sensitive protective equipment, can be found on the IEC website. The committee h

35、as decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised ed

36、ition, or amended. TR 61496-4 IEC:2007 5 INTRODUCTION This technical report provides information related to the design, construction and testing of electro-sensitive protective equipment (ESPE) that employs vision-based protective devices (VBPDs) for the sensing function for the safeguarding of mach

37、inery. At the time of writing this technical report, there were no commercial examples of VBPDs on the market. Therefore, to provide an example of a VBPD for the writing of this technical report, the working group used the results of a Japanese research project. The working group understands that th

38、e possibilities for VBPDs are much greater than the limited technologies demonstrated by this example. When real systems do arrive, it is believed that some of the basic concepts put forth in this technical report can be used as a guide for the evaluation and testing of those first systems. It is an

39、ticipated that the characteristics and requirements for VBPDs will vary significantly depending on the underlying technologies and methodologies employed. Therefore, it is planned that this technical report will be divided into subparts which address the unique requirements of the different types of

40、 vision-based devices (for example IEC 61496-4-1 would cover general requirements and IEC 61496-4-2 would cover requirements unique to devices using a passive reference pattern). 6 TR 61496-4 IEC:2007 SAFETY OF MACHINERY ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT Part 4: Particular requirements for equi

41、pment using vision based protective devices (VBPD) 1 Scope NOTE As an example for the development of this technical report, a VBPD is defined as consisting of a single image-sensing device viewing one two-dimensional image against a passive pattern as the background and where the detection principle

42、 is blocking the view of the pattern. Information about the thickness, shape and surface characteristics of the object is not required for detection. A passive pattern is not created by a light source. Replacement: This part of IEC 61496 specifies requirements for the design, construction and testin

43、g of electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety-related system, employing vision-based protective devices (VBPDs) for the sensing function. Special attention is directed to features which ensure that an appropriate safety-related perform

44、ance is achieved. An ESPE may include optional safety-related functions, the requirements for which are given in Annex A of IEC 61496-1 and this technical report. This technical report does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardou

45、s parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. It is limited to automatic vision-based ESPEs that do not require human intervention for detection. It is limited to

46、automatic vision-based ESPEs that detect objects entering into, or present in, a detection zone(s). Excluded from this part are VBPD employing radiation at wavelengths outside the range 400 nm to 1 500 nm. This technical report does not address those aspects required for complex classification or di

47、fferentiation of the object detected. This technical report may be relevant to applications other than those for the protection of persons, for example the protection of machinery or products from mechanical damage. In those applications, additional requirements may be necessary, for example when th

48、e materials that are to be recognized by the sensing function have different properties from those of persons. This technical report does not deal with EMC emission requirements. 2 Normative references Additions: IEC 60825-1:2007, Safety of laser products Part 1: Equipment classification and require

49、ments ISO 13855:2002, Safety of machinery Positioning of protective equipment with respect to the approach speeds of parts of the human body TR 61496-4 IEC:2007 7 3 Terms and definitions Replacement: 3.3 detection capability ability to detect the specified test pieces (see 4.2.13) in the specified detection zone NOTE Detection capability is generally measur