ANSI ASME B16 34-2017 Valves - Flanged Threaded and Welding End.pdf

1、Valves Flanged, Threaded, and Welding End AN AMERICAN NATIONAL STANDARD ASME B16.34-2017 (Revision of ASME B16.34-2013)ASME B16.34-2017 (Revision of ASME B16.34-2013) Valves Flanged, Threaded, and Welding End AN AMERICAN NATIONAL STANDARD xDate of Issuance: August 23, 2017 The next edition of this S

2、tandard is scheduled for publication in 2020. ASME issues writt en replies to inquiries concerning interpre tations of technical aspects of this Standard. Periodically certain actions of the ASME B16 Committ ee may be published as Cases. Cases and interpre tations are published on the ASME Web site

3、under the Committ ee Pages at htt p:/cstools.asme.org/ as they are issued. Errata to codes and s tandards may be post ed on the ASME Web site under the Committ ee Pages to pr ovide corrections to incorrectly published item s, or to correct typographical or grammatical err ors in codes and s tandards

4、. Such errata shall be used on the date post ed. The Committ ee Pages can be found at htt p:/cstools.asme.org/. There is an option available to automatically receive an e-mail notification when errata are post ed to a particular code or sta ndard. This option can be found on the appr opriate Committ

5、 ee Page after selecting “Errata” in the “Publication Information” section. ASME is the regis tered trademark of The American Society of Mechanical Engineers. This code or standard was developed under proc edures accredited as meeting the criteria for American National Standards. The Standards Commi

6、t tee that approved the code or standard was balanced to assure that individuals fro m competent and concerned int erests have had an opportunity to participate. The pr oposed code or standard was made available for public review and comment that provides an opportunity for additional public input f

7、ro m industry , academia, regulatory agencies, and the public-at -large. ASME does not “appr ove, ” “rate, ” or “endorse” any it em, construction, proprietary device, or activity . ASME does not take any position with respect to the validity of any patent rights assert ed in connection with any item

8、s mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable lett ers patent, nor assume any such liability . Users of a code or standard are expressly advised that determination of the validity of any such patent rig

9、hts, and the risk of infringement of such rights, is entirely their own responsibility . Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpret ed as government or industry endor sement of this code or standard. ASME accepts responsibility for

10、only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of int erpretations by individuals. No part of this document may be reproduced in any form, in an electronic retrieval sys t em or otherwise, without the p

11、rior writ ten permission of the publisher . The American Society of Mechanical Engineers Two Park Avenue, New York, NY 10016-5990 Copyright 2017 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All rights reserved Printed in U.S.A.CONTENTS Foreword . . . . . . . . . . . . . . . . . . . . . . . . . .

12、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Committee Roster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Correspondence With the B16 Committee . . . . . . .

13、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Summary of Changes . . . . . . . . . . . . . . . . . . .

14、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv List of Changes in Record Number Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi 1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 Pressuretemperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 Nominal Pipe Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16、. . . . . . . . . . . . . . . . . . 4 4 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17、. . . . . . . . 5 6 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 7 Pressure Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 8 Require

18、ments for Special Class Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Mandatory Appendices I Radiography Examination: Procedure and Acceptance Standards . . . . . . . . . . . . . . . . . . . . . . . . 121 II Magnetic Particle Examination: Procedure and A

19、cceptance Standards . . . . . . . . . . . . . . . . . . . . 123 III Liquid Penetrant Examination: Procedure and Acceptance Standards . . . . . . . . . . . . . . . . . . . . 124 IV Ultrasonic Examination: Procedure and Acceptance Standards . . . . . . . . . . . . . . . . . . . . . . . . . 125 V Requi

20、rements for Limited Class Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 VI Basis Equations for Minimum Wall Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 VII Pressuretemperature Ratings: U.S. Customary Units .

21、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 VIII References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 Nonmandatory Appendices A Relationship Between Nominal Pipe Size and Inside Diameter . .

22、. . . . . . . . . . . . . . . . . . . . . . . 214 B Method Used for Establishing Pressuretemperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . 216 C Quality System Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224

23、Figures 1 Method of Designating Location of Auxiliary Connections When Specified . . . . . . . . . . . . . . . . . 14 2 Butterfly Valve Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3 Thread Length for Auxiliary Connections . .

24、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4 Bosses for Auxiliary Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5 Socket Welding for Auxiliary Connections . . . . . . . . . . . . . . . . . . . . . . .

25、. . . . . . . . . . . . . . . . . 17 6 Butt Welding for Auxiliary Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 7 Gate Body (Pressure Seal Bonnet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 iii8

26、Y Pattern Globe Body (Pressure Seal Bonnet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 9 Angle Body (Pressure Seal Bonnet): Bonnet Same As Y Pattern Globe . . . . . . . . . . . . . . . . . . . . 19 10 Elbow Down (Pressure Seal Bonnet) . . . . . . . . . . . . . . . .

27、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 11 Gate Body (Flanged Bonnet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 12 Globe Body (Flanged Bonnet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28、. . . . . . . . . . . 20 13 Butterfly Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 14 Plug Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29、 . . 21 15 Conduit Gate Body (Pressure Seal Bonnet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 16 Dished Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 17 Flat Cover . . . . . .

30、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V-1 Limited Class Stress Area Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Tables 1 Material Specification List: Applicable

31、 ASTM Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2-1.1 Ratings for Group 1.1 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 2-1.2 Ratings for Group 1.2 Materials . . . . . . . . . . . . . . . . . . . . . . . .

32、 . . . . . . . . . . . . . . . . . . . . . . . 30 2-1.3 Ratings for Group 1.3 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 2-1.4 Ratings for Group 1.4 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33、 . . . . . . . . 34 2-1.5 Ratings for Group 1.5 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 2-1.6 Ratings for Group 1.6 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 2-1.7 Rati

34、ngs for Group 1.7 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 2-1.8 Ratings for Group 1.8 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 2-1.9 Ratings for Group 1.9 Materials .

35、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 2-1.10 Ratings for Group 1.10 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 2-1.11 Ratings for Group 1.11 Materials . . . . . . . . . . . . . . .

36、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 2-1.12 Ratings for Group 1.12 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 2-1.13 Ratings for Group 1.13 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

37、. . . . . . . . . . . . . . . . 50 2-1.14 Ratings for Group 1.14 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 2-1.15 Ratings for Group 1.15 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38、. 54 2-1.16 Ratings for Group 1.16 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 2-1.17 Ratings for Group 1.17 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 2-1.18 Ratings for Group

39、1.18 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 2-2.1 Ratings for Group 2.1 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 2-2.2 Ratings for Group 2.2 Materials . . . . . . . . .

40、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 2-2.3 Ratings for Group 2.3 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 2-2.4 Ratings for Group 2.4 Materials . . . . . . . . . . . . . . . . . . . . . . . .

41、 . . . . . . . . . . . . . . . . . . . . . . . 67 2-2.5 Ratings for Group 2.5 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 2-2.6 Ratings for Group 2.6 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42、 . . . . . . . . 71 2-2.7 Ratings for Group 2.7 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 2-2.8 Ratings for Group 2.8 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 2-2.9 Rati

43、ngs for Group 2.9 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 2-2.10 Ratings for Group 2.10 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 2-2.11 Ratings for Group 2.11 Materials

44、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 2-2.12 Ratings for Group 2.12 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 2-3.1 Ratings for Group 3.1 Materials . . . . . . . . . . . . . . . .

45、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 iv2-3.2 Ratings for Group 3.2 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 2-3.3 Ratings for Group 3.3 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46、. . . . . . . . . . . . . . . . . 86 2-3.4 Ratings for Group 3.4 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 2-3.5 Ratings for Group 3.5 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

47、. . 89 2-3.6 Ratings for Group 3.6 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 2-3.7 Ratings for Group 3.7 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 2-3.8 Ratings for Group

48、 3.8 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 2-3.9 Ratings for Group 3.9 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 2-3.10 Ratings for Group 3.10 Materials . . . . . . .

49、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 2-3.11 Ratings for Group 3.11 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 2-3.12 Ratings for Group 3.12 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 2-3.13 Ratings for Group 3.13 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 2-3.14 Ratings for Group 3.14 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .