ANSI ASSE A10 13-2011 Safety Requirements for Steel Erection《钢结构安全性要求》.pdf

1、 AMERICANSOCIETY OF SAFETYENGINEERS AMERICANNATIONALSTANDARD ANSI/ASSE A10.13 2011 American National Standard for Construction and Demolition Operations ANSI/ASSE A10.13 2011 ANSI/ASSE A10.13 2011 Safety Requirements for Steel Erection Copyright American Society of Safety Engineers Provided by IHS u

2、nder license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 00:45:17 MDT No reproduction or networking permitted without license from IHS -,-,- The information and materials contained in this publication have been developed

3、from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the ANSI accredited A10 Committee or individual committee members accept no legal responsibility for the correctness or completeness of this material or its application to specific factua

4、l situations. By publication of this standard, ASSE or the A10 Committee does not ensure that adherence to these recommendations will protect the safety or health of any persons, or preserve property. Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE License

5、e=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 00:45:17 MDT No reproduction or networking permitted without license from IHS -,-,- ANSI ANSI/ASSE A10.13 2011 American National Standard Construction and Demolition Operations Safety Requirements fo

6、r Steel Erection Secretariat American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 Approved: April 21, 2011 Effective Date: August 15, 2011 American National Standards Institute, Inc. Copyright American Society of Safety Engineers Provided by IHS under license

7、 with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 00:45:17 MDT No reproduction or networking permitted without license from IHS -,-,- Approval of an American National Standard requires verification by ANSI that the requirement

8、s for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement me

9、ans much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect pr

10、eclude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstance give an interpreta

11、tion of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretation should be addressed to the secretariat or sponsor whose name

12、 appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of Am

13、erican National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published May, 2011 by: American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 (847) 699-2929 www.asse.org Copyright 2011

14、 by the American Society of Safety Engineers All Rights Reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America American National Standard Copyr

15、ight American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 00:45:17 MDT No reproduction or networking permitted without license from IHS -,-,- Foreword (This Forewo

16、rd is not a part of American National Standard A10.13-2011.) This standard is one of a series of safety standards that have been formulated by the Accredited Standards Committee on Safety in Construction and Demolition Operations, A10. It is expected that the standards in the A10 series will find a

17、major application in industry, serving as a guide to contractors, labor, and equipment manufacturers. For the convenience of users, a list of existing and proposed standards in the A10 series for Safety Requirements in Construction and Demolition Operations follows. A10.1 Pre-Project/Pre-Task Safety

18、 & Health Planning (under development) A10.2 Safety, Health, and Environmental Training (under development) A10.3 Powder-Actuated Fastening Systems A10.4 Personnel Hoists and Employee Elevators A10.5 Material Hoists A10.6 Demolition Operations A10.7 Transportation, Storage, Handling, and Use of Comm

19、ercial Explosives and Blasting Agents A10.8 Scaffolding A10.9 Concrete and Masonry Construction A10.10 Temporary and Portable Space Heating Devices A10.11 Personnel and Debris Nets A10.12 Excavation A10.13 Steel Erection A10.15 Dredging A10.16 Tunnels, Shafts, and Caissons A10.17 Safe Operating Prac

20、tices for Hot Mix Asphalt (HMA) Construction A10.18 Temporary Roof and Floor Holes, Wall Openings, Stairways, and Other Unprotected Edges A10.19 Pile Installation and Extraction Operations A10.20 Ceramic Tile, Terrazzo, and Marble Work A10.21 Safe Construction and Demolition of Wind Generation/Turbi

21、ne Facilities (under development) A10.22 Rope-Guided and Non-Guided Workers Hoists A10.23 Safety Requirements for the Installation of Drilled Shafts (under development) A10.24 Roofing Safety Requirements for Low-Sloped Roofs A10.25 Sanitation in Construction A10.26 Emergency Procedures for Construct

22、ion Sites (under development) A10.27 Hot Mix Asphalt Facilities A10.28 Work Platforms Suspended from Cranes or Derricks A10.29 Aerial Platforms in Construction (under development) A10.31 Digger-Derricks A10.32 Personal Fall Protection Used in Construction and Demolition Operations A10.33 Safety and

23、Health Program Requirements for Multi-Employer Projects A10.34 Public Protection A10.37 Debris Nets A10.38 Basic Elements of a Program to Provide a Safe and Healthful Work Environment A10.39 Construction Safety and Health Audit Program A10.40 Reduction of Musculoskeletal Problems in Construction A10

24、.41 Equipment Operator and Supervisor Qualifications and Responsibilities (under development) A10.42 Rigging Qualifications and Responsibilities in the Construction Industry A10.43 Confined Spaces in Construction (under development) A10.44 Lockout/Tagout in Construction A10.46 Hearing Loss Preventio

25、n Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 00:45:17 MDT No reproduction or networking permitted without license from IHS -,-,-A10.47 Highway

26、Construction Safety A10.48 Communication Tower Erection (under development) A10.49 Control of Health Hazards (under development) One purpose of these standards is to serve as guides to governmental authorities having jurisdiction over subjects within the scope of the A10 Committee standards. If thes

27、e standards are adopted for governmental use, the reference of other national codes or standards in individual volumes may be changed to refer to the corresponding regulations. Revisions: The A10 Committee welcomes proposals for revisions to this standard. Revisions are made to the standard periodic

28、ally (usually five years from the date of the standard) to incorporate changes that appear necessary or desirable, as demonstrated by experience gained from the application of the standard. Proposals should be as specific as possible, citing the relevant section number(s), the proposed wording, and

29、the reason for the proposal. Pertinent documentation would enable the A10 Committee to process the changes in a more timely manner. Interpretations: Upon a request in writing to the Secretariat, the A10 Committee will render an interpretation of any requirement of the standard. The request for inter

30、pretation should be clear, citing the relevant section number(s) and phrased as a request for a clarification of a specific requirement. Oral interpretations are not provided. No one but the A10 Committee (through the A10 Secretariat) is authorized to provide any interpretation of this standard. App

31、roval: Neither the A10 Committee nor American National Standards Institute (ANSI) “approves,“ “certifies,“ “rates,“ or “endorses“ any item, construction, proprietary device, or activity. Appendices: Appendices are included in most standards to provide the user with additional information related to

32、the subject of the standard. Appendices are not part of the approved standard. Committee Meetings: The A10 Committee meets twice a year. Persons wishing to attend a meeting should contact the Secretariat for information. Standard Approval: This standard was processed and approved for submittal to AN

33、SI by the American National Standards Committee on Safety in Construction and Demolition Operations, A10. Approval of the standard does not necessarily imply (nor is it required) that all Committee members voted for its approval. At the time this standard was approved, the A10 Committee had the foll

34、owing members: Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 00:45:17 MDT No reproduction or networking permitted without license from IHS -,-,- R

35、ichard King, CSP, Chairman James Tomaseski, Vice Chairman Timothy R. Fisher, CSP, CHMM, ARM, CPEA, Secretary Jennie Dalesandro, Administrative Technical Support Organization Represented Name of Representative Accident Prevention Corporation Frank Burg, CSP Michael Serpe, CSP Aegis Corporation Matthe

36、w J. Burkart, P.E. Judith Burkart Alstom Power Robert Renney Ted P. Sharp American Insurance Services Group Thad Nosal James G. Borchardt, CSP, CPE ASCE - Construction Institute Committee Harlan Fair, P.E. William R. Nash, P.E. American Society of Safety Engineers Ken Shorter, CSP, ARM A. David Bray

37、ton, CSP, CPC American Wind Energy Association Michele Myers American Work Platform Training, Inc. Dennis W. Eckstine Asbestos Workers International Union Terry Lynch Jim E. Lapping, MS, P.E., CSP Associated Builders and Contractors, Inc. Michael W. Hayslip, Esq., P.E., CSP Chris Williams Associated

38、 General Contractors of America, The Charlie Bird Kevin Cannon Association of Union Constructors, The William Treharne, P.E. Jeffrey Hardison A-Z Safety Resources, Inc. Jane F. Williams, CPEA, CCA Barton-Malow Company Mark Klimbal, CSP, ARM Clayton Shafer Black & Veatch Richard F. King, CSP John H.

39、Johnson Building & Construction Trades Department Pete Stafford Jim Platner, Ph.D., CIH CPWR - Center for Construction Research & Training Mike McCann, Ph.D., CIH Pete Stafford Capital Safety Group Scott C. Casebolt J. Thomas Wolner, P.E. Clark Construction Group Tim Sirofchuck, CSP Kurt Dunmire Col

40、e-Preferred Safety Consulting, Inc. Barry Cole Philip L. Colleran Philip L. Colleran, CSP Construction & Realty Safety Group, Inc. Ron Lattanzio Frank Marino ECI Safety Services Co. Anthony Merisola Patrick Brennan, CSHM, CSSM Edison Electric Institute R. Lee Reed, Jr. Charles Kelly E. I. Dupont de

41、Nemours & Company Gary Birchall Ronald Probasco, CSP Elevator Industry Preservation Fund Garry Kosinski Rod Gilles Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resa

42、le, 05/02/2012 00:45:17 MDT No reproduction or networking permitted without license from IHS -,-,-Ellis Fall Safety Solutions J. Nigel Ellis, Ph.D., P.E., CSP, CPE John Whitty, P.E. Gilbane Building Co. Anthony ODea, CSP, CHST Charles Praul, Jr., ASP Richard D. Hislop Richard Hislop Independent Elec

43、trical Contractors, Inc. John P. Masarick Bob Baird Institute of Makers of Explosives Lon D. Santis J. Christopher Ronay International Association of Bridge, Structural, Ornamental and Reinforcing Iron Workers Frank Migliaccio, Jr. Robert Migliaccio, Sr. International Brotherhood of Boilermakers Rog

44、er Erickson Bridget Connors International Brotherhood of Electrical Workers James Tomaseski International Brotherhood of Teamsters LaMont Byrd, CIH International Safety Equipment Association Cristine Fargo International Union of Bricklayers & Allied Craftworkers Michael Kassman, CHST Eileen Betit In

45、ternational Union of Operating Engineers Emmett Russell Steve Brown Jack L. Mickle & Associates Jack Mickle, Ph.D., P.E. Steve Stock, P.E., PLS Laborers International Union of North America Scott Schneider, MS, CIH Walter A. Jones, MS Marsh USA, Inc. Timothy Bergeron, CSP Maryland Occupational Safet

46、y & Health Mischelle Vanreusel Eric Uttenreither Mechanical Contractors Association of America Peter Chaney, MS, CSP Dennis Langley MYR Group, Inc. National Association of Home Builders Robert Matuga Marcus Odorizzi National Association of Railroad Safety Consultants & Investigators Lewis Barbe, P.E

47、., CSP, CRSP National Electrical Contractors Association Michael J. Johnston Jerry Rivera National Institute for Occupational Safety & Health Thomas G. Bobick, Ph.D., P.E., CSP, CPE Matt Gillen, CIH National Railroad Contractors & Maintenance Association Jeffrey D. Meddin, CSP, CHCM National Roofing

48、 Contractors Association Harry Dietz Tom Shanahan National Society of Professional Engineers E. Ross Curtis, P.E., DFE Paul Swanson, P.E. Operative Plasterers and Cement Masons International Association Gerald Ryan Daniel M. Paine Daniel M. Paine Barbara Paine Phoenix Fabricators and Erectors, Inc. Robert E. Clouse, CSP, CHST Frank Massey Powder Actuated Tool Manufacturers Institute James A. Borchers David Jablonski Power Consultants, Incorporated David Goldsmith Camille Villanova Copyright American Society of Safety Engineers Provided by IHS under