API MPMS 17 1-2014 Manual of Petroleum Measurement Standards Chapter 17 1 Guidelines for Marine Inspection (Sixth Edition Includes Access to Additional Content).pdf

1、 Access to Additional Content for API MPMS 17.1 6THEdition 2014 (Click here to view the publication) This Page is not part of the original publication This page has been added by IHS as a convenience to the user in order to provide access to additional content as authorized by the Copyright holder o

2、f this document Click the link(s) below to access the content and use normal procedures for downloading or opening the files. 17_1 Annex A Forms Information contained in the above is the property of the Copyright holder and all Notice of Disclaimer however, the Institute makes no representation, war

3、ranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or for the violation of any authorities having jurisdiction with which this publication may conflict.API publications are published to faci

4、litate the broad availability of proven, sound engineering and operating practices. These publications are not intended to obviate the need for applying sound engineering judgment regarding when and where these publications should be utilized. The formulation and publication of API publications is n

5、ot intended in any way to inhibit anyone from using any other practices.Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard is solely responsible for complying with all the applicable requirements of that standard. API does not represent, w

6、arrant, or guarantee that such products do in fact conform to the applicable API standard.Classified areas may vary depending on the location, conditions, equipment, and substances involved in any given situation. Users of this Standard should consult with the appropriate authorities having jurisdic

7、tion.Users of this Standard should not rely exclusively on the information contained in this document. Sound business, scientific, engineering, and safety judgment should be used in employing the information contained herein.API is not undertaking to meet the duties of employers, manufacturers, or s

8、uppliers to warn and properly train and equip their employees, and others exposed, concerning health and safety risks and precautions, nor undertaking their obligations to comply with authorities having jurisdiction.Information concerning safety and health risks and proper precautions with respect t

9、o particular materials and conditions should be obtained from the employer, the manufacturer or supplier of that material, or the material safety data sheet.Where applicable, authorities having jurisdiction should be consulted.Work sites and equipment operations may differ. Users are solely responsi

10、ble for assessing their specific equipment and premises in determining the appropriateness of applying the Standard. At all times users should employ sound business, scientific, engineering, and judgment safety when using this Standard.All rights reserved. No part of this work may be reproduced, tra

11、nslated, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, NW, Washington, DC 20005.Copyright 2014 American Petr

12、oleum InstituteForewordNothing contained in any API publication is to be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything contained in the publication be construed a

13、s insuring anyone against liability for infringement of letters patent.Shall: As used in a standard, “shall” denotes a minimum requirement in order to conform to the specification.Should: As used in a standard, “should” denotes a recommendation or that which is advised but not required in order to c

14、onform to the specification.This document was produced under API standardization procedures that ensure appropriate notification and participation in the developmental process and is designated as an API standard. Questions concerning the interpretation of the content of this publication or comments

15、 and questions concerning the procedures under which this publication was developed should be directed in writing to the Director of Standards, American Petroleum Institute, 1220 L Street, NW, Washington, DC 20005. Requests for permission to reproduce or translate all or any part of the material pub

16、lished herein should also be addressed to the director.Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-time extension of up to two years may be added to this review cycle. Status of the publication can be ascertained from the API Standards

17、 Department, telephone (202) 682-8000. A catalog of API publications and materials is published annually by API, 1220 L Street, NW, Washington, DC 20005.Suggested revisions are invited and should be submitted to the Standards Department, API, 1220 L Street, NW, Washington, DC 20005, standardsapi.org

18、.iiiContentsPage1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Normative References. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19、 . . . . . . . . . . . . . . . . . . . . . . . . 13 Terms and Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Safety and Health Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . .

20、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.2 Static Electricity Hazards . . . . . . . . . . . . . . .

21、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.3 Health Hazards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 General Information . . .

22、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 API MPMS Chapter 17 Standards Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96.1 General . . . .

23、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96.2 Chapter 17.2Measurement of Cargoes on Board Tank Vessels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96.3 Chapter 17.3Gu

24、idelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96.4 Chapter 17.4Method for Quantification of Small Volumes on Marine

25、 Vessels (OBQ/ROB) . . . . . . . . . . 96.5 Chapter 17.5/EI HM 64Guidelines for Cargo Analysis and Reconciliation of Cargo Quantities. . . . . . . 96.6 Chapter 17.6Guidelines for Determining the Fullness of Pipelines Between Vessels and Shore Tanks . . . . . . . . . . . . . . . . . . . . . . . . . .

26、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96.7 Chapter 17.7Recommended Practices for Developing Barge Control Factors (Volume Ratio) . . . . . . . 96.8 Chapter 17.8Guidelines for Pre-loading Inspection of Marine Vessel Cargo Tanks . . . .

27、. . . . . . . . . . . . 96.9 Chapter 17.9/EI HM 49Vessel Experience Factor (VEF). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106.10 Chapter 17.10.1/ISO 10976Measurement of Cargoes on Board Marine Gas Carriers, Part 1 Liquefied Natural Gas. . . . . . . . . . . . . . .

28、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106.11 Chapter 17.10.2/EI HM 55Measurement of Refrigerated and/or Pressurized Cargoes on Board Marine Gas Carriers, Part 2Liquefied Petroleum and Chemical Gases. . . . . . . . . . . . . . . . . . . . . . . .

29、 . . 106.12 Chapter 17.11/EI HM 52Measurement and Sampling of Cargoes on Board Tank Vessels Using Closed and Restricted Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106.13 Chapter 17.12/EI HM 51Procedure for Bulk Liquid

30、Chemical Cargo Inspection by Cargo Inspectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Operations Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107.2 Key Meeting . . . . . . . . . . . . . . . . . . . . . . .

32、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Vessel/Shore Communication and Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 Vessel Inspection and Sampling . . . . . . . . . .

33、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129.1 Vessel Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129.2 Vessel Sampling . . . . . . .

34、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159.3 During Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

35、710 Shore Inspection and Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1710.1 Shore Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36、 . . . . . . . . . . . 1710.2 Shore Tank Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1710.3 Shore Tank Temperatures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

37、 . . . . . . . . . . . . . . . . . . . . . . . 1810.4 Sampling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1910.5 Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20vContentsPage11 Voyage Analysis and Reconciliation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2011.1 Shore and Vessel Transferred Volu

39、me Calculations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2011.2 Load Port Voyage Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2011.3 In-transit Difference. . . . . .

40、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2011.4 Discharge Port Voyage Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111.5 Qualitati

41、ve Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111.6 LOP or Notice of Apparent Discrepancy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42、. 2111.7 Time Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111.8 Distribution of Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43、. . . . . . . . . . . . . . . . . . 21Annex A (informative) Sample Forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45viIntroductionThese guidelines are intended to encourage uniform inspection practices for marine petroleum and chemical cargo quantity and quality control. Use of these guidelines will simplify the making of agreements for transfe

45、rring petroleum and chemical cargoes and help ensure that the agreements can be clearly interpreted and executed between parties. The recommendations provided here are not intended to interfere in any way with provisions contrary to these guidelines that may exist in any contract or applicable recom

46、mended practices of other regulatory or standards bodies, nor are they intended to interfere with safety and environmental considerations or local conditions. These guidelines are not promulgated as the only acceptable method of custody transfer measurement or inspection practices. Guidelines for th

47、e inspection of marine cargo are subject to ongoing reappraisal and periodic change.Measurement and sampling activities to be performed on board a vessel shall be accomplished in the presence of, or with the express permission of, the vessels master or other appropriate authority. Activities to be p

48、erformed at the loading and discharge shore facilities shall be accomplished in the presence of, or with the express permission of, the appropriate shore supervisory personnel.For reasons of safety, only appropriate and approved equipment should be used. Local jurisdictional regulations regarding lo

49、ading and unloading also shall be followed.vii1Guidelines for Marine Inspection1 ScopeThese guidelines specify the policy and minimum recommended practices for the manual and automatic measurement, sampling, and accounting for bulk quantities of crude oil (including spiked, blended, and reconstituted crude oil), petroleum products, and chemicals that are transported on marine vessels. The activities described in these guidelines include actions by producers, buyers, sellers, terminal operators, vessel owners and their crews, customs authorities, independent inspectors, and