ASTM D1550-2018 Standard ASTM Butadiene Measurement Tables.pdf

1、Designation: D1550 18StandardASTM Butadiene Measurement Tables1This standard is issued under the fixed designation D1550; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates

2、the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope*1.1 The ASTM Butadiene Measurement Tables are for usein the calculation of quantities of butadiene. The accompany-ing Tables 1-3 cover the normal operating ranges for the

3、reduction of observed relative density and volume to 15.556/15.556 C (60/60 F) and for the calculation of weight-volumerelationships of butadiene.1.2 These tables are applicable to both butadiene andbutadiene concentrates (minimum of 60 % butadiene).NOTE 1These tables replace the existing tables in

4、the NationalInstitute of Standards and Technology Letter Circulars LC-736 andLC-757 and the Rubber Reserve Corp., Butadiene Laboratory Manual.1.3 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard

5、 to establish appro-priate safety, health, and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accor-dance with internationally recognized principles on standard-ization established in the Decision on Pr

6、inciples for theDevelopment of International Standards, Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade (TBT) Committee.2. Referenced Documents2.1 ASTM Standards:2D1250 Guide for Use of the Petroleum Measurement Tables2.2 API Standards:3MPMS Chapter 11.4

7、.1 Manual of Petroleum MeasurementStandards Chapter 11Physical Properties Data Section4Properties of Reference Materials Part 1Density ofWater and Water Volumetric Correction Factors for WaterCalibration of Volumetric ProversMPMS Chapter 11.5 Manual of Petroleum MeasurementStandards Chapter 11Physic

8、al Properties Data Section5Density/Weight/Volume Intraconversion Part1Conversions of API Gravity at 60 F3. Significance and Use3.1 Accurate knowledge of the weight and volume ofbutadiene is necessary for the orderly manufacture, storage,transfer, and sale of the material. These tables are suitable f

9、oruse in these and similar aspects of butadiene commerce.1This standard is under the jurisdiction of ASTM Committee D02 on PetroleumProducts, Liquid Fuels, and Lubricants and the API Committee on PetroleumMeasurement, and is the direct responsibility of Subcommittee D02.02 /COMQ thejoint ASTM-API Co

10、mmittee on Hydrocarbon Measurement for Custody Transfer(Joint ASTM-API). This standard has been approved by the sponsoring committeesand accepted by the Cooperating Societies in accordance with established proce-dures.Current edition approved Oct. 1, 2018. Published December 2018. Originallyapproved

11、 in 1958. Last previous edition approved in 2015 as D1550 94 (2015).DOI: 10.1520/D1550-18.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Sum

12、mary page onthe ASTM website.3Available from American Petroleum Institute (API), 1220 L. St., NW,Washington, DC 20005-4070, http:/www.api.org.*A Summary of Changes section appears at the end of this standardCopyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428

13、-2959. United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards, Guides and Recommendations issued by the World Trade Organization Technic

14、al Barriers to Trade (TBT) Committee.1TABLE 1 REDUCTION OF OBSERVED RELATIVE DENSITY TO RELATIVE DENSITY 15.556/15.556 C (60/60 F)This table gives values of relative density 15.556/15.556 C (60/60 F) corresponding to specific gravities observed with a glass hydrometer at temperatures otherthan 60 F.

15、 The expression “Observed Relative Density” appears in this table because it is the term most generally used in industry. For specific gravities determinedby hydrometer, a more exact expression would be “hydrometer indication at the observed temperature.” This hydrometer indication differs slightly

16、from the truespecific gravity at the observed temperature owing to the expansion or contraction of the glass hydrometer when its temperature differs from its calibrationtemperature of 60 F.It is generally impracticable to determine a relative density at exactly 15.556 C (60 F) although it is at this

17、 temperature only that strictly correct results areobtained with a standard glass hydrometer. In converting an observed specific gravity at the observed temperature t F (hydrometer indication of relative densityt/60 F) to the corresponding 60/60 F value, two corrections are possible. The first arise

18、s from the change in volume of the glass hydrometer with temperature, andthe second arises from the change in volume of the butadiene. This table considers only the change in volume of the butadiene because the change in volumeofthehydrometer is insignificant in comparison with the accuracy of the v

19、alues for the change in volume of the butadiene.This table must be entered with specific gravities measured with a glass hydrometer calibrated at 15.556/15.556 C (60/60 F)ExampleIf the relative density observed on a hydrometer in butadiene at 40 F is 0.642, what is its relative density 60/60 F?Enter

20、 the table in the column for “Observed Relative Density,” headed 0.640, and note that against an “Observed Temperature” of 40 F, the correspondingrelative density 60/60 F is 0.627Likewise, note that for 0.645 specific gravity opposite 40 F, the corresponding relative density 60/60 F is 0.632This rep

21、resents an increase of 0.005 in relative density 60/60 F for an increase of 0.005 in the value at 40 F. Therefore, by simple proportion, anincrease in the specific gravity value noted at 40 F from 0.640 to 0.642 increases the corresponding relative density 60/60 F by 0.4 0.005 or 0.002Then, the rela

22、tive density 60/60 F corresponding to the observed relative density of 0.642 at 40 F is 0.627 + 0.002 or 0.629D1550 182TABLE 1 Reduction of Observed Relative Density to Relative Density 15.6/15.6C (60/60F)18.343.0 C (65110 F) 0.5850.615ObservedTemperatureFAObserved Relative Density0.585 0.590 0.595

23、0.600 0.605 0.610 0.615Corresponding Relative Density 60/60 F65 . . . . . . .66 . . . . . . .67 . . . . . . .68 . . . . . . 0.62169 . . . . . . 0.621.70 . . . . . . 0.62271 . . . . . . 0.62372 . . . . . . 0.62373 . . . . . . 0.62474 . . . . . . 0.62575 . . . . . 0.621 0.62576 . . . . . 0.621 0.62677

24、 . . . . . 0.622 0.62778 . . . . . 0.623 0.62779 . . . . . 0.623 0.62880 . . . . . 0.624 0.62981 . . . . . 0.625 0.62982 . . . . 0.621 0.625 0.63083 . . . . 0.621 0.626 0.63184 . . . . 0.622 0.627 0.63185 . . . . 0.623 0.627 0.63286 . . . . 0.623 0.628 0.63387 . . . . 0.624 0.629 0.63388 . . . . 0.6

25、25 0.629 0.63489 . . . 0.621 0.625 0.630 .90 . . . 0.622 0.626 0.631 .91 . . . 0.622 0.627 0.631 .92 . . . 0.623 0.627 0.632 .93 . . . 0.624 0.628 0.633 .94 . . . 0.624 0.629 0.633 .95 . . . 0.625 0.629 0.634 .96 . . 0.621 0.625 0.630 0.634 .97 . . 0.622 0.626 0.631 . .98 . . 0.622 0.627 0.631 . .99

26、 . . 0.623 0.627 0.632 . .100 . . 0.624 0.628 0.632 . .101 . . 0.624 0.629 0.633 . .102 . 0.621 0.625 0.629 0.634 . .103 . 0.621 0.626 0.630 0.634 . .104 . 0.622 0.626 0.631 . . .105 . 0.623 0.627 0.631 . . .106 . 0.623 0.628 0.632 . . .107 . 0.624 0.628 0.633 . . .108 . 0.625 0.629 0.633 . . .109 0

27、.621 0.625 0.629 0.634 . . .110 0.622 0.626 0.630 0.634 . . .D1550 183TABLE 1 Reduction of Observed Relative Density to Relative Density 15.6/15.6C (60/60F)9.4 to + 10.0 C (1550 F) 0.6200.650ObservedTemperature,FAObserved Relative Density0.620 0.625 0.630 0.635 0.640 0.645 0.650Corresponding Relativ

28、e Density 60/60 F15 . . . . . . .16 . . . . . . 0.62117 . . . . . . 0.62118 . . . . . . 0.62219 . . . . . . 0.62320 . . . . . . 0.62321 . . . . . . 0.62422 . . . . . . 0.62523 . . . . . . 0.62524 . . . . . 0.621 0.62625 . . . . . 0.621 0.62726 . . . . . 0.622 0.62827 . . . . . 0.623 0.62828 . . . .

29、. 0.624 0.62929 . . . . . 0.624 0.63030 . . . . . 0.625 0.63031 . . . . . 0.626 0.63132 . . . . 0.621 0.626 0.63233 . . . . 0.622 0.627 0.63234 . . . . 0.622 0.628 0.63335 . . . . 0.623 0.628 0.63436 . . . . 0.624 0.629 0.63437 . . . . 0.625 0.630 .38 . . . . 0.625 0.630 .39 . . . 0.621 0.626 0.631

30、.40 . . . 0.621 0.627 0.632 .41 . . . 0.622 0.627 0.632 .42 . . . 0.623 0.628 0.633 .43 . . . 0.624 0.629 0.634 .44 . . . 0.624 0.629 0.634 .45 . . . 0.625 0.630 . .46 . . . 0.626 0.631 . .47 . . 0.621 0.626 0.631 . .48 . . 0.622 0.627 0.632 . .49 . . 0.623 0.628 0.633 . .50 . . 0.623 0.628 0.633 .

31、.D1550 184TABLE 1 Reduction of Observed Relative Density to Relative Density 15.6/15.6 C (60/60 F)10.029.4 C (5085 F) 0.6200.640ObservedTemperature,FAObserved Relative Density0.620 0.625 0.630 0.635 0.640Corresponding Relative Density 60/60 F50 . . 0.623 0.628 0.63351 . . 0.624 0.629 0.63452 . . 0.6

32、25 0.630 .53 . . 0.625 0.630 .54 . 0.621 0.626 0.631 .55 . 0.622 0.627 0.632 .56 . 0.622 0.627 0.632 .57 . 0.623 0.628 0.633 .58 . 0.624 0.629 0.634 .59 . 0.624 0.629 0.634 .60 . 0.625 0.630 . .61 0.621 0.626 0.631 . .62 0.622 0.626 0.631 . .63 0.622 0.627 0.632 . .64 0.623 0.628 0.633 . .65 0.624 0

33、.628 0.633 . .66 0.624 0.629 0.634 . .67 0.625 0.630 . . .68 0.626 0.630 . . .69 0.626 0.631 . . .70 0.627 0.632 . . .71 0.628 0.632 . . .72 0.628 0.633 . . .73 0.629 0.634 . . .74 0.630 . . . .75 0.630 . . . .76 0.631 . . . .77 0.631 . . . .78 0.632 . . . .79 0.633 . . . .80 0.633 . . . .81 0.634 .

34、 . . .82 . . . . .83 . . . . .84 . . . . .85 . . . . .D1550 185TABLE 1 Reduction of Observed Relative Density to Relative Density 15.6/15.6 C (60/60 F)23.3 to 1.1 C (10 to +30 F) 0.6550.675ObservedTemperatureFAObserved Relative Density0.655 0.660 0.665 0.670 0.675Corresponding Relative Density 60/60

35、 F10 . . . 0.624 0.6309 . . . 0.625 0.6318 . . . 0.626 0.6327 . . 0.621 0.627 0.6326 . . 0.622 0.627 0.6335 . . 0.622 0.628 0.6344 . . 0.623 0.629 0.6343 . . 0.624 0.629 .2 . . 0.624 0.630 .1 . . 0.625 0.631 .0 . . 0.626 0.631 .1 . 0.621 0.627 0.632 .2 . 0.622 0.627 0.633 .3 . 0.622 0.628 0.634 .4 .

36、 0.623 0.629 0.634 .5 . 0.624 0.629 . .6 . 0.624 0.630 . .7 . 0.625 0.631 . .8 . 0.626 0.631 . .9 0.621 0.627 0.632 . .10 0.622 0.627 0.633 . .11 0.622 0.628 0.634 . .12 0.623 0.629 0.634 . .13 0.624 0.629 . . .14 0.625 0.630 . . .15 0.625 0.631 . . .16 0.626 0.631 . . .17 0.627 0.632 . . .18 0.627

37、0.633 . . .19 0.628 0.633 . . .20 0.629 0.634 . . .21 0.629 . . . .22 0.630 . . . .23 0.631 . . . .24 0.632 . . . .25 0.632 . . . .26 0.633 . . . .27 0.634 . . . .28 0.634 . . . .29 . . . . .30 . . . . .AC = (F32) 59 .D1550 186TABLE 2 REDUCTION OF OBSERVED VOLUME TO 15.6 C (60 F) AGAINST RELATIVE DE

38、NSITY 60/60 FThis table gives the factors for converting butadiene volumes observed at temperatures other than 15.6 C (60 F) to the corresponding volumes at 60 F for valuesof relative density 60/60 F in the range 0.621 to 0.634.It is emphasized that the volume correction factors in this table make n

39、o allowance for the thermal expansion of tanks and other types of containers.This table must be entered with relative density values 15.6/15.6 C (60/60 F) and volumes measured at Fahrenheit temperatures.ExampleWhat is the volume at 60 F of 45 500 U.S. gal at 35 F of butadiene whose relative density

40、60/60 F is 0.625?Enter the table in the column for “Specific Gravity 60/60 F headed 0.625, and note that against an “Observed Temperature of 35 F the factor is1.027Hence, 1 U.S. gal of butadiene of relative density 0.625 at 60/60 F and measured at 35 F occupies a volume at 60 F of 1.027 U.S. galThen

41、 45 500 U.S. gal measured at 35 F occupy a volume at 60 F of 45 500 1.027 or 46 728 U.S. galD1550 187TABLE 2 Reduction of Observed Volume to 15.6C (60F) Against Relative Density 60/60F23.3 + 4.4 C (1040 F) 0.6210.627ObservedTemperatureFASpecific Gravity 60/60 F0.621 0.622 0.623 0.624 0.625 0.626 0.6

42、27Factor for Reducing Volume to 60 F10 1.074 1.074 1.073 1.073 1.073 1.072 1.0729 1.073 1.073 1.072 1.072 1.072 1.071 1.0718 1.072 1.072 1.071 1.071 1.071 1.070 1.0707 1.071 1.071 1.070 1.070 1.070 1.069 1.0696 1.070 1.070 1.069 1.069 1.069 1.068 1.0685 1.069 1.069 1.068 1.068 1.068 1.067 1.0674 1.0

43、68 1.068 1.067 1.067 1.067 1.067 1.0663 1.067 1.067 1.066 1.066 1.066 1.066 1.0652 1.066 1.066 1.065 1.065 1.065 1.065 1.0641 1.065 1.065 1.064 1.064 1.064 1.064 1.0630 1.064 1.064 1.063 1.063 1.063 1.063 1.0621 1.063 1.063 1.062 1.062 1.062 1.062 1.0612 1.062 1.062 1.061 1.061 1.061 1.061 1.0603 1.

44、061 1.061 1.060 1.060 1.060 1.060 1.0594 1.060 1.060 1.059 1.059 1.059 1.059 1.0585 1.059 1.059 1.058 1.058 1.058 1.058 1.0576 1.058 1.058 1.057 1.057 1.057 1.057 1.0567 1.057 1.057 1.056 1.056 1.056 1.056 1.0558 1.056 1.056 1.055 1.055 1.055 1.055 1.0549 1.055 1.054 1.054 1.054 1.054 1.054 1.05310

45、1.054 1.053 1.053 1.053 1.053 1.053 1.05211 1.053 1.052 1.052 1.052 1.052 1.052 1.05112 1.052 1.051 1.051 1.051 1.051 1.050 1.05013 1.051 1.050 1.050 1.050 1.050 1.049 1.04914 1.050 1.049 1.049 1.049 1.049 1.048 1.04815 1.048 1.048 1.048 1.048 1.048 1.047 1.04716 1.047 1.047 1.047 1.047 1.047 1.046

46、1.04617 1.046 1.046 1.046 1.046 1.046 1.045 1.04518 1.045 1.045 1.045 1.045 1.045 1.044 1.04419 1.044 1.044 1.044 1.044 1.044 1.043 1.04320 1.043 1.043 1.043 1.043 1.042 1.042 1.04221 1.042 1.042 1.042 1.042 1.041 1.041 1.04122 1.041 1.041 1.041 1.041 1.040 1.040 1.04023 1.040 1.040 1.040 1.040 1.03

47、9 1.039 1.03924 1.039 1.039 1.039 1.038 1.038 1.038 1.03825 1.038 1.038 1.038 1.037 1.037 1.037 1.03726 1.037 1.037 1.037 1.036 1.036 1.036 1.03627 1.036 1.036 1.036 1.035 1.035 1.035 1.03528 1.035 1.035 1.034 1.034 1.034 1.034 1.03429 1.034 1.034 1.033 1.033 1.033 1.033 1.03330 1.033 1.032 1.032 1.

48、032 1.032 1.032 1.03231 1.031 1.031 1.031 1.031 1.031 1.031 1.03132 1.030 1.030 1.030 1.030 1.030 1.030 1.03033 1.029 1.029 1.029 1.029 1.029 1.029 1.02934 1.028 1.028 1.028 1.028 1.028 1.028 1.02835 1.027 1.027 1.027 1.027 1.027 1.027 1.02736 1.026 1.026 1.026 1.026 1.026 1.026 1.02637 1.025 1.025

49、1.025 1.025 1.025 1.025 1.02538 1.024 1.024 1.024 1.024 1.024 1.024 1.02339 1.023 1.023 1.023 1.023 1.023 1.022 1.02240 1.022 1.022 1.022 1.022 1.021 1.021 1.021D1550 188TABLE 2 Reduction of Observed Volume to 15.6 C (60 F) Against Relative Density 60/60 F4.432.2 C (4090 F) 0.6210.627ObservedTemperatureFASpecific Gravity 60/60 F0.621 0.622 0.623 0.624 0.625 0.626 0.627Factor for Reducing Volume to 60 F40 1.022 1.022 1.022 1.