IEEE 1048-2016 en Guide for Protective Grounding of Power Lines《电力线的保护接地》.pdf

1、IEEE Guide for Protective Grounding of Power LinesIEEE Std 1048-2016(Revision of IEEE Std 1048-2003)IEEE Power and Energy SocietySponsored by the Electrical Safety and Maintenance of Lines CommitteeIEEE3 Park AvenueNew York, NY 10016-5997USAIEEE Std 1048-2016(Revision of IEEE Std 1048-2003)IEEE Guid

2、e for Protective Grounding of Power LinesSponsor Electrical Safety and Maintenance of Lines Committee of the IEEE Power and Energy SocietyApproved 29 January 2016IEEE-SA Standards BoardAbstract: Guidelines are provided for Temporary Protective Grounding (TPG) of electric power lines to assist in pro

3、tection of workers from voltages and currents that might develop at a de-ener-gized worksite during maintenance of ac overhead and underground, transmission and distribution lines, cables, and equipment. Other forms of worker protection include isolation and insulation. These methods are described i

4、n other documents and guides and are not discussed here.Keywords: bracket grounds, combination grounding, grounding, IEEE 1048, protective grounds safety, worksite groundsThe Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2016 by The Insti

5、tute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 21 December 2016. Printed in the United States of America.IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or complet

6、eness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no othe

7、r ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and co

8、mments received from users of the standard.In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any pe

9、rson utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri-ate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.IN NO EVENT SHAL

10、L IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE-MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CON-TRA

11、CT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.4Copyright 2016 IEEE. All rights reserved.Transl

12、ationsThe IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.Official statementsA statement, written or oral, that is not pro

13、cessed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational

14、 courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE.Comments on standardsComments for revision of IEEE Standards documents are welcome from any in

15、terested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain-ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comme

16、nts. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concur-rence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordi-nating Committees are not able to

17、provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant

18、IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854 USALaws and regulationsUsers of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any

19、 IEEE Standards document does not imply compliance to any applicable regulatory require-ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in c

20、ompliance with applicable laws, and these documents may not be construed as doing soCopyrightsIEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These

21、 include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the pro-motion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in

22、copyright to the documents.5Copyright 2016 IEEE. All rights reserved.PhotocopiesSubject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial

23、use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Ser-vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Cop

24、yright Clearance Center.Updating of IEEE Standards documentsUsers of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corri-genda, or errata. An official

25、 IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect.Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision proces

26、s, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition

27、and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at

28、 http:/standards.ieee.org.ErrataErrata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.PatentsAttention is called to the possibility that i

29、mplementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a stat

30、ement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compen

31、sation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim-ination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re-sponsible for ide

32、ntifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agr

33、eements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid-ity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Associat

34、ion6Copyright 2016 IEEE. All rights reserved.ParticipantsAt the time this IEEE guide was completed, the Temporary Protective Grounding Working Group had the following membership:Clayton King, ChairKeith Wallace, Vice ChairJohn AnthonyKristine BuchholzThomas BuonincontriJames ChistensenBrett CuevasMa

35、rcia EblenBrian ErgaDon DoddsBuck FifeDavid GroverMark GreenMike HannerEdward HuntAlan HollomanChristopher KasiewiczNorbert KilroeJeff LaningaJoe LoveThomas McCarthyBill McGoughLucus MooreTim OlsonGraham PeaceLawrence SchweitzerCharles Stinnett Jr.Samuel StonerockEric SurmanisSteve TheisJames Tomase

36、skiJanos TothTom VerdecchioKevin VerettErica WeyerGary ZevenbergenSteve ZubiriThe following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention.William AckermanAli Al AwaziSaleman AlibhayThomas BarnesJames BoufordGernot

37、 BrandtGustavo BrunelloWilliam BushMark BushnellWilliam ByrdRobert ChristmanGary DonnerRandall DotsonMarcia EblenBrian ErgaDan EvansJorge Fernandez DaherMarcel FortinFredric FriendDavid GarrettGeorge GelaDavid GilmerWaymon GochEdwin GoodwinCharles GroseRandall GrovesBruce GurleyAjit GwalJeffrey Hart

38、enbergerTimothy HaydenJeffrey HelzerSteven HensleyLee HerronRaymond HillWerner HoelzlEdward HuntGael KennedyYuri KhersonskyMorteza KhodaieChad KigerClayton KingJames KinneyJ. KoepfingerJim KulchiskySaumen KunduDonald LairdChung-Yiu LamMichael LauxmanGreg LuriJohn Mcalhaney Jr.William McBrideThomas M

39、cCarthyBill McGoughDaniel MulkeyJerry MurphyDennis NeitzelArthur NeubauerMichael NewmanJoe NimsGary NissenTim OlsonCarl OrdeLorraine PaddenDonald ParkerBansi PatelShashi PatelPercy PoolDouglas ProctorReynaldo RamosKeith ReeseMichael RobertsJesse RorabaughThomas RozekBartien SayogoDennis SchlenderCha

40、rles ShawStephen ShullJames SmithJerry SmithGary StoedterPeter SutherlandJohn TothJohn VergisCarl WallKeith WallaceMark WaltonDaniel WardYingli WenKenneth WhiteJames WilsonLarry YoungJian YuLuis ZambranoDawn ZhaoTiebin Zhao7Copyright 2016 IEEE. All rights reserved.When the IEEE-SA Standards Board ap

41、proved this guide on 29 January 2016, it had the following membership:Jean-Philippe Faure, ChairVacant Position, Vice ChairJohn Kulick, Past ChairKonstantinos Karachalios, SecretaryChuck AdamsMasayuki AriyoshiTed BurseStephen DukesJianbin FanJ. Travis GriffithGary HoffmanRonald W. HotchkissMichael J

42、anezikJoseph L. Koepfinger*Hung LingKevin LuAnnette D. ReillyGary RobinsonMehmet UlemaYingli WenHoward WolfmanDon WrightYu YuanDaidi Zhong*Member Emeritus8Copyright 2016 IEEE. All rights reserved.IntroductionThis introduction is not part of IEEE Std 1048-2016, IEEE Guide for Protective Grounding of

43、Power Lines.This revision of IEEE Std 1048 is the first revision since the revision in 2003. The Working Group determined the guide needed a common method for evaluating different temporary protective grounding methods, more detailed explanation of electric and magnetic field induction, clarificatio

44、n on the definition of equipotential zones (EPZ), and example calculations for realistic temporary protective grounding work scenarios.An equipotential zone (EPZ), with respect to protective grounding, is relative to the exposure voltage and tolerable current of the worker. Any arrangement of tempor

45、ary protective grounds that achieves limiting ex-posure voltages to allow less current through the worker (in a defined work area) than the tolerable current is considered to create an EPZ. This is obtainable by worksite grounding, bracket grounding, and combination grounding as is described by the

46、Guide, and performed safely in the industry.Worksite grounding, bracket grounding, and combination grounding are different arrangements of temporary protective grounding commonly used in industry due to specific types of repairs and maintenance required on a line. The intent of the guide is to ensur

47、e the safety of the worker drives the temporary protective grounding procedures. Appendix B is included as a normative reference to compare these grounding arrangements to one example of a worksite.This guide was developed through the collaborative effort of an international group of volunteers with

48、 exper-tise in many disciplines. While this guide represents a consensus among this volunteer group, it is not the only view on the issues addressed herein. As with any guidance, use of this guide and the procedures and positions herein does not proof or guarantee safety. Use and compliance with thi

49、s IEEE guide are wholly voluntary.9Copyright 2016 IEEE. All rights reserved.Contents1. Overview . 101.1 Purpose . 102. Normative references 103. Definitions . 114. Temporary protective grounding principles. 134.1 General . 134.2 Induction 144.3 Inductive coupling during faults . 174.4 Lightning 174.5 Developing an equipotential zone (EPZ) 184.6 Approximating worker exposure voltage on structures 185. Temporary protective grounding assemblies and components 195.1 General . 195.2 Temporary protective grounding assemblies 195.3 Clamps and ferrules 205.4 Cable 226. Grounding