IEEE 1290-2015 en Guide for Motor-Operated Valve (MOV) Motor Application Protection Control and Testing in Nuclear Power-Generating Stations《核电站中电动阀门(MOV)的电机使用 .pdf

1、 IEEE Guide for Motor-Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power-Generating Stations Sponsored by the Nuclear Power Engineering Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy SocietyIEEE Std 1290-2015(Revision ofIEEE Std

2、1290-1996) IEEE Std 1290-2015 (Revision of IEEE Std 1290-1996) IEEE Guide for Motor-Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power-Generating Stations Sponsor Nuclear Power Engineering Committee of the IEEE Power and Energy Society Approved 3 September 2015

3、 IEEE-SA Standards Board Abstract: Motors used to drive valve operators in nuclear power-generating stations are discussed. Guidelines to evaluate the adequacy of motors used to drive valve operators; to provide recommendations for motor application; and to provide methods for protection, control, a

4、nd testing of motors used for valve operation are presented. Keywords: generating stations, IEEE 1290, motor application, motor control, motor protection, motors, motor testing, nuclear power, nuclear power-generating stations, valve operation, valve operators, valves The Institute of Electrical and

5、 Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2015 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 2 October 2015. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for

6、 a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE s

7、tandard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approv

8、ed and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or ent

9、ity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a

10、 competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

11、PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND

12、 REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Offi

13、cial statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal posi

14、tion of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments f

15、or revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a propo

16、sed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its soci

17、eties and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in re

18、visions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all appl

19、icable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the pub

20、lication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and

21、 are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by pub

22、lic authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use o

23、r individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also

24、 be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corri

25、genda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has

26、 not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given

27、 document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs stand

28、ards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodica

29、lly. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewit

30、h. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwi

31、lling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance h

32、as not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission

33、of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further info

34、rmation may be obtained from the IEEE Standards Association. Participants At the time this IEEE guide was completed, the 4.4 Working Group had the following membership: Bruce A. Lord, Chair Jusuf Krvavac, Vice Chair Duane Brock John P. Carter Richard Daverio Angelo V. DiSpigna Nader Eldeiry David Gl

35、adey Dale T. Goodney Terry Jamerson Hari Kodali Kevin Littrell John Mallanda David Sehi Robert Stark Sudhir Thakur James B. Thompson The Subcommittee on Auxiliary Power (SC4) of the Nuclear Power Engineering Committee that recommended approval off this draft guide had the following membership: Keith

36、 Bush, Chair Mark D. Bowman, Vice Chair George Attarian Elnora Balser Duane Brock Robert C. Carruth John P. Carter Richard Casalaina Paul Colaianni Parthiv Desai John Disosway Nader Eldeiry Kenneth Fleischer Robert J. Fletcher Chris Georgeson Dale T. Goodney Evans Heacock Mel Hess Dirk C. Hopp Ayode

37、le Ishola-Salawu Yoon Kim Hari Kodali Edvin Kozo Jusuf Krvavac Justin Lane Harvey Leake Bruce A. Lord Roy Lyon John D. MacDonald John Mallanda Singh Matharu Kenneth Miller Gene Poletto Gregg Reimers Bill Roettger Myat San Shawn Simon Bill Snider Robert Stark Mitch Staskiewicz Sudhir Thakur Tammy Wom

38、ack The Nuclear Power Engineering Committee that approved this standard had the following membership: George A. Ballassi, Chair Stephen A. Fleger, Vice Chair Thomas Koshy, Secretary Satish Aggarwal Ijaz Ahmad Dheya Al-Othmany George Attarian Farouk Baxter* Royce Beacom Mark D. Bowman Daniel F. Brosn

39、an* Nissen M. Burstein Keith Bush Robert C. Carruth John P. Carter Suresh Channarasappa Tom Crawford Dennis Dellinger David R. Desaulniers John Disosway Walter F. Emerson Kenneth Fleischer Robert J. Fletcher Robert Francis Robert Fuid* David Gladey James F. Gleason Dale T. Goodney Brit Grim* Robert

40、Hall Kuljit Hara Daryl Harmon David Herrell Dirk C. Hopp Gary Johnson Christopher Kerr Bok-Ryul Kim Wolfgang Koenig James K. Liming Bruce A. Lord John D. MacDonald J. Scott Malcolm Alexander Marion* Kenneth Miller Michael H. Miller Edward R. Mohtashemi Yasushi Nakagawa Warren Odess-Gillett James Par

41、ello* Ted Riccio Rebecca Steinman John A. Stevens James E. Stoner Marek Tengler James E. Thomas Masafumi Utsumi Michael Waterman Edward Wenzinger John White Yvonne Williams Paul L. Yanosy, Sr. Oon-Pyo Zhu *Nonvoting Members Copyright 2015 IEEE. All rights reserved. vi When the IEEE-SA Standards Boar

42、d approved this guide on 3 September 2015, it had the following membership: John D. Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Ted Burse Stephen Dukes Jean-Philippe Faure J. Travis Griffith Gary Hoffman Michael Jan

43、ezic Joseph L. Koepfinger* David J. Law Hung Ling Andrew Myles T. W. Olsen Glenn Parsons Ronald C. Petersen Annette D. Reilly Stephen J. Shellhammer Adrian P. Stephens Yatin Trivedi Philip Winston Don Wright Yu Yuan Daidi Zhong *Member Emeritus Copyright 2015 IEEE. All rights reserved. vii Introduct

44、ion This introduction is not part of IEEE Std 1290-2015, IEEE Guide for Motor-Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power-Generating Stations. Motor-operated valves (MOVs) have historically presented both electrical and mechanical problems to the enginee

45、ring community. Since a complete evaluation of MOV applications requires both electrical and mechanical disciplines, no one existing document covers MOVs in a comprehensive manner. As a result, MOV applications are evaluated using a wide array of existing standards and other documents. Thus, it is d

46、ifficult to assemble all the supporting material to address all issues relating to MOVs and valve actuator motors (VAMs). This guide provides references to other published documents as applicable. This guide presents issues and suggestions for consideration in the application, protection, control, a

47、nd testing of VAMs. It specifically attempts to cover topics not found in existing IEEE, or other easily accessible, documents. This guidance is an accumulation of recommendations and suggested solutions to problems based on experience. The reader is cautioned to use this guide in conjunction with a

48、pplicable IEEE documents and new solutions to VAM problems that are continually evolving. Due to the dynamic nature of issues concerning MOVs, this document cannot be all-inclusive, and the user should search for information and solutions beyond this document. Limit and torque switch settings have a

49、lso presented problems to the engineering community. Their settings are dependent upon many complex factors. Guidance for setting these devices is outside the scope of this document, but this will be considered for a future revision. This guide is presented in a logical progression of topics, their interrelationships, and their complexities. Copyright 2015 IEEE. All rights reserved. viii Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 1 2. Normative references 2 3. Definitions, acronyms, and abbreviations 3 3.1 Definitions . 3 3.2 Acronyms and abbreviations . 4 4. Motor applic