IEEE 1484 13 3-2014 en Recommended Practice for Learning Technology-ISO 21000-2 2005 Information Technology-Multimedia Framework (MPEG-21)-Part 2 Digital Item D.pdf

1、 IEEE Recommended Practice for Learning TechnologyISO 21000-2:2005 Information TechnologyMultimedia Framework (MPEG-21)Part 2: Digital Item Declaration Mapping to the Conceptual Model for Resource Aggregation Sponsored by the Learning Technology Standards Committee IEEE 3 Park Avenue New York, NY 10

2、016-5997 USA IEEE Computer Society IEEE Std 1484.13.3-2014IEEE Std 1484.13.3-2014 IEEE Recommended Practice for Learning TechnologyISO 21000-2:2005 Information TechnologyMultimedia Framework (MPEG-21)Part 2: Digital Item Declaration Mapping to the Conceptual Model for Resource Aggregation Sponsor Le

3、arning Technology Standards Committee of the IEEE Computer Society Approved 27 March 2014 IEEE-SA Standards Board ii Copyright 2014 IEEE. All rights reserved. Copyright permissions: The definitions in the scope notes in Clause 7 are taken from ISO/IEC 21000-2:2005 and are reproduced with the permiss

4、ion of the International Organization for Standardization, ISO. This standard can be obtained from any ISO member and from the Web site of the ISO Central Secretariat at the following address: www.iso.org. Copyright remains with ISO. Knoodl is a registered trademark of Revelytix, Inc. This informati

5、on is given for the convenience of users of this recommended practice and does not constitute an endorsement by the IEEE of these products. Equivalent products may be used if they can be shown to lead to the same results. W3C is a trademark (registered in numerous countries) of the World Wide Web Co

6、nsortium; marks of W3C are registered and held by its host institutions MIT, ERCIM, Keio, and Beihang. XMLExtensible Markup Language; Language by W3Cclaimed as a trademark or generic term by MIT, ERCIM, and/or Keio on behalf of the W3C. Grateful acknowledgement is made to Revelytix, Inc. for making

7、available the Knoodlontology tools that were used to aid in the development and maintenance of the ontology files. Abstract: This recommended practice specifies how the elements and attributes defined in Multimedia Framework (MPEG-21)Part 2: Digital Item Declaration relate to the components of the c

8、onceptual model for resource aggregation defined in IEEE Std 1484.13.1-2012. Keywords: aggregation format, conceptual model, content aggregation, digital aggregation, digital resource, IEEE 1484.13.3, Moving Pictures Experts Group, MPEG-21, Multimedia Framework, RAMLET, resource aggregation, resourc

9、e aggregation format The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2014 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 26 June 2014. Printed in the United States of America. IEEE is a r

10、egistered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are suppli

11、ed “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the vi

12、ewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or othe

13、r services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circ

14、umstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SU

15、BSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVE

16、N IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE sho

17、uld be considered the approved IEEE standard. iv Copyright 2014 IEEE. All rights reserved. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE

18、or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal vie

19、ws of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to

20、IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also recei

21、ve the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, I

22、EEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataw

23、ay, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible

24、for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyr

25、ighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of eng

26、ineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive licens

27、e to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Per

28、mission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. v Copyright 2014 IEEE. All rights reserved. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents

29、may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or err

30、ata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the a

31、rt. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ie

32、eexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Web

33、site at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publicati

34、on of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Web

35、site at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of an

36、y unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the

37、legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determin

38、ation of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.vi Copyright 2014 IEEE. All rights reserved. Participants At the time this recommended practice was s

39、ubmitted to the IEEE-SA Standards Board for approval, the Resource Aggregation Models for Learning, Education, and Training Working Group had the following membership: Kerry Blinco, Chair Katrien Verbert, Principal Investigator Scott Lewis, Technical Editor Nancy Hoebelheinrich Willem Kraan The foll

40、owing members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. Kerry Blinco Juan Carreon Keith Chow Raul Colcher Geoffrey Darnton David Fuschi Randall Groves Nancy Hoebelheinrich Werner Hoelzl Noriyuki Ikeuch

41、i Mark Jaeger Willem Kraan Susan Land Greg Luri Michael Newman Daniel Rehak Steven Smith Thomas Starai Marcy Stutzman Janusz Zalewski Daidi Zhong When the IEEE-SA Standards Board approved this guide on 27 March 2014 it had the following membership: John Kulick, Chair Jon Walter Rosdahl, Vice Chair R

42、ichard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Peter Balma Farooq Bari Ted Burse Clint Chaplain Stephen Dukes Jean-Phillippe Faure Gary Hoffman Michael Janezic Jeffrey Katz Joseph L. Koepfinger* David J. Law Hung Ling Oleg Logvinov Ted Olsen Glenn Parsons Ron Peterson Adrian Stephe

43、ns Peter Sutherland Yatin Trivedi Phil Winston Don Wright Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Catherine Berger IEEE-SA Content Publishing Michael Kipness IEEE-SA

44、 Technical Community vi Copyright 2014 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 1484.13.3-2014, IEEE Recommended Practice for Learning TechnologyISO 21000-2:2005 Information TechnologyMultimedia Framework (MPEG-21)Part 2: Digital Item Declaration Mapping to t

45、he Conceptual Model for Resource Aggregation. This recommended practice specifies the how the elements and attributes defined in ISO 21000-2:2005 Multimedia FrameworkPart 2: Digital Item Declaration (MPEG-21 DID) relate to the components of the conceptual model for resource aggregation defined in IE

46、EE Std 1484.13.1-2012. vii Copyright 2014 IEEE. All rights reserved. Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 2 2. Normative references 2 3. Definitions, acronyms, and abbreviations 2 3.1 Definitions . 2 3.2 Acronyms and abbreviations . 2 4. Special terms 3 5. Class and property prefix defin

47、itions 3 6. Conformance 3 6.1 Conforming aggregation instances 4 6.2 Conforming bindings . 4 6.3 Conforming extensions of the MPEG-21 DID mapping ontology 4 6.4 Conforming transforming implementations . 4 7. MPEG-21 DID mapping ontologyclasses 5 7.1 mpeg:anchor 5 7.2 mpeg:annotation 6 7.3 mpeg:asser

48、tion . 7 7.4 mpeg:choice . 7 7.5 mpeg:choiceID . 8 7.6 mpeg:component . 8 7.7 mpeg:condition 9 7.8 mpeg:container 10 7.9 mpeg:contentEncoding 10 7.10 mpeg:declarations 11 7.11 mpeg:default 11 7.12 mpeg:descriptor . 12 7.13 mpeg:didl . 13 7.14 mpeg:didlDocumentID 13 7.15 mpeg:didlInfo 13 7.16 mpeg:en

49、coding . 14 7.17 mpeg:except . 14 7.18 mpeg:false 14 7.19 mpeg:fragment . 15 7.20 mpeg:fragmentID . 15 7.21 mpeg:ID . 15 7.22 mpeg:item 16 7.23 mpeg:maxSelections 17 7.24 mpeg:mimeType 17 7.25 mpeg:minSelections . 17 7.26 mpeg:precedence . 18 7.27 mpeg:ref . 18 7.28 mpeg:require 18 7.29 mpeg:resource 19 7.30 mpeg:schema . 19 viii Copyright 2014 IEEE. All rights reserved. 7.31 mpeg:selectID 20 7.32 mpeg:selection . 20 7.33 mpeg:statement 21 7.34 mpeg:target 21 7.35 mpeg:true . 21 8. MPEG-21 mapping ontology object properties . 22 8.1 ramlet:includes