1、 IEEE Guide for Determination of Maximum Winding-Temperature Rise in Liquid-Filled Immersed Transformers Amendment 1 Sponsored by the Transformers Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std 1538a-2015 (Amendment to IEEE Std 1538-2000) IEEE Std 153
2、8a-2015 (Amendment to IEEE Std 1538-2000) IEEE Guide for Determination of Maximum Winding-Temperature Rise in Liquid-Filled Immersed Transformers Amendment 1 Sponsor Transformers Committee of the IEEE Power and Energy Society Approved 3 September 2015 IEEE-SA Standards Board 1 2 Abstract: The clause
3、 that addresses direct measurement with fiber-optic detectors is expanded and an annex detailing examples of installation techniques for fiber-optic probes is added in this amendment. Keywords: distribution transformer, hottest-spot temperature, IEEE 1538a, power transformers, temperature-rise test,
4、 thermal model The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2015 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 11 September 2015. Printed in the United States of America. IEEE is a re
5、gistered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplie
6、d “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the vie
7、wpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
8、 services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circu
9、mstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUB
10、STITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN
11、 IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE shou
12、ld be considered the approved IEEE standard. 3 Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be co
13、nsidered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal
14、 position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for ch
15、anges in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests
16、. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation reque
17、sts. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users
18、of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable
19、 regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international
20、copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making th
21、ese documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual st
22、andard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individ
23、ual standard for educational classroom use can also be obtained through the Copyright Clearance Center. 4 Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from t
24、ime to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten year
25、s. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any
26、 IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously.
27、For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users
28、are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or
29、 validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance
30、may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Pate
31、nt Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms
32、or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such right
33、s, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. 5 6 Copyright 2015 IEEE. All rights reserved. Participants At the time this IEEE guide was completed, the Hottest-Spot Temperature Rise Determination for Liquid- Immersed Transformers Wo
34、rking Group had the following membership: Richard P. Marek, Chair Thomas Prevost, Vice Chair Hasse Nordman Donald W. Platts Dejan Susa The following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. Roberto Asano Don
35、ald Ayers Robert Ballard Peter Balma Thomas Barnes Barry Beaster Robert Beavers W. J. (Bill) Bergman Enrique Betancourt Steven Bezner Wallace Binder Thomas Blackburn W. Boettger Darren Brown Derek Brown Paul Cardinal Juan Castellanos Kurt Clemente Stephen Conrad Jerry Corkran John Crouse Willaim Dar
36、ovny Dieter Dohnal Gary Donner Randall Dotson Jorge Fernandez Daher Namal Fernando Joseph Foldi Bruce Forsyth George Frimpong Robert Ganser Frank Gerleve Ali Ghafourian David Gilmer Edwin Goodwin William Griesacker Randall Groves J. Harlow Roger Hayes Jeffrey Helzer Gary Hoffman Thomas Holifield Phi
37、lip Hopkinson Richard Jackson John John Wayne Johnson Laszlo Kadar Gael Kennedy Gary King James Kinney Axel Kraemer Neil Kranich Jim Kulchisky Saumen Kundu John Lackey Chung-Yiu Lam Thomas La Rose Aleksandr Levin Thomas Lundquist Richard P. Marek J. Dennis Marlow Lee Matthews Phillip McClure Mark Mc
38、Nally Charles McShane Joseph Melanson Sujeet Mishra Daleep Mohla Daniel Mulkey Ryan Musgrove Ali Naderian Jahromi K. R. M. Nair Kris K. Neild Michael Newman Joe Nims Hasse Nordman Lorraine Padden Klaus Papp Luke Parthemore Bansi Patel Dhiru Patel Brian Penny Christopher Petrola Ugo Piovan Donald W.
39、Platts Klaus Pointner Alvaro Portillo Thomas Prevost Jean-Christophe Riboud Charles Rogers Oleg Roizman Thomas Rozek Daniel Sauer Bartien Sayogo Ewald Schweiger Hyeong Sim Jerry Smith Sanjib Som Thomas Spitzer Ronald Stahara David Stankes Michael Swearingen Malcolm Thaden Juan Thierry James Thompson
40、 John Vergis Jane Verner David Wallach Kenneth White Jian Yu Waldemar Ziomek 7 Copyright 2015 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this amendment on 3 September 2015, it had the following membership: John D. Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hule
41、tt, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Ted Burse Stephen Dukes Jean-Philippe Faure J. Travis Griffith Gary Hoffman Michael Janezic Joseph L. Koepfinger* David J. Law Hung Ling Andrew Myles T. W. Olsen Glenn Parsons Ronald C. Petersen Annette D. Reilly Stephen J. Shellha
42、mmer Adrian P. Stephens Yatin Trivedi Phillip Winston Don Wright Yu Yuan Daidi Zhong *Member Emeritus Introduction This introduction is not part of IEEE Std 1538a-2015, IEEE Guide for Determination of Maximum Winding Temperature Rise in Liquid-Filled Immersed TransformersAmendment 1. The state of th
43、e art has improved over the years since the last reaffirmation of this guide. This amendment adds substantial detail and general recommendations for sensor location, based on the historical experiences of many fiber-optic measurements, providing sufficient detail for everyday use on common designs. Examples are also provided illustrating proper sensor installation that was missing from the current guide. 8 Copyright 2015 IEEE. All rights reserved.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1