IEEE 1657-2018 en Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries《固定电池的安装和维护用人员资格实施规程》.pdf

1、IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries IEEE Std 1657-2018 (Revision of IEEE Std 1657-2009) IEEE Power and Energy Society Sponsored by the Energy Storage and Stationary Battery Committee IEEE 3 Park Avenue New York, NY 10016-599

2、7 USAIEEE Std 1657-2018 (Revision of IEEE Std 1657-2009) IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries Sponsor Energy Storage and Stationary Battery Committee of the IEEE Power and Energy Society Approved 15 February 2018 IEEE-SA Stan

3、dards BoardAbstract: The areas of recommended knowledge for installers and maintainers of stationary batteries and related systems, to the extent that they affect the battery, are defined in this recommended practice. Design of the dc system and sizing of the dc battery charger(s) are beyond the sco

4、pe of this document. Only lead-acid and nickel-cadmium battery technologies are covered in this recommended practice. An outline (not necessarily in training order) of the items that should be covered by training programs for stationary battery installation and maintenance personnel is provided. Cer

5、tifying trained personnel and providing its own battery technician training programs will not be performed by IEEE. Keywords: battery, certification, classroom, competent, course, curriculum, education, experience, IEEE 1657, inspect, install, instruct, knowledge, level, maintenance, monitor, preven

6、tative, proactive, proficient, qualification, routine, service, skill, student, teach, technician, test The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2018 by The Institute of Electrical and Electronics Engineers, Inc. All rights res

7、erved. Published 25 May 2018. Printed in the United States of America. IEEE and NESC are registered trademarks in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all c

8、onditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or prov

9、ide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing a

10、nd making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely up

11、on his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPE

12、CIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHER

13、WISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE W AS FORESEEABLE.4 Copyright 2018 IEEE. All rights reserved. Translations The IEEE consensus development process involves th

14、e review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board

15、Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE

16、 standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation

17、 with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of co

18、ncerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions ex

19、cept in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be sub

20、mitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply complianc

21、e to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these document

22、s may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and re

23、gulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents.5 Copyright 2018 IEEE

24、. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing

25、 fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Stan

26、dards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. A current IEEE document at any point in time consists of

27、 the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reasonable to conclude that its conte

28、nts, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the i

29、ssuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Err

30、ata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this stan

31、dard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an

32、Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under

33、reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essentia

34、l Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reaso

35、nable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6 Copyright 20

36、18 IEEE. All rights reserved. Participants At the time this IEEE recommended practice was completed, the Battery Technician Qualification Working Group had the following membership: Curtis Ashton, Chair Edward Amato Christopher Belcher William Cantor Doug Frazier Daniel Lambert Steve McCluer James M

37、cDowall Michael Nispel John Polenz Rick Raczak Ed Rogers Randy Schubert Richard Tressler The following members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. Mahamadou Abdou Tankari Samuel Aguirre Ali Al A

38、wazi Edward Amato Curtis Ashton Gary Balash Paul Barnhart Christopher Belcher Bill Brown Derek Brown Demetrio Bucaneg Jr William Cantor Paul Cardinal Thomas Carpenter Charles Cotton Glenn Davis Peter Demar Gary Donner Neal Dowling John Gagge Jr David Gilmer Randall Groves Ajit Gwal Werner Hoelzl Ala

39、n Jensen Thomas Keels Thomas Koshy Jim Kulchisky Mikhail Lagoda Chung-Yiu Lam Daniel Lambert Jon Loeliger Hugo Marroquin Daniel Martin James McDowall Daniel Mcmenamin James Midolo Daleep Mohla Dennis Neitzel Michael Newman Michael Nispel Lorraine Padden James Parello Bansi Patel Christopher Petrola

40、Jim Phillips Anthony Picagli John Polenz Robert Rallo Bartien Sayogo Christopher Searles Nikunj Shah David Smith Jeremy Smith Jerry Smith Gary Smullin Gary Stoedter Wayne Timm Richard Tressler James V an De Ligt Lesley V arga Stephen V echy John V ergis Donald Wengerter Kenneth White Hughes Wike Iain Wright Dean Y ager Jian Y u