IEEE 1735-2014 en Recommended Practice for Encryption and Management of Electronic Design Intellectual Property (IP) (IEEE Computer Society Incorporating Corrig.pdf

1、 IEEE Recommended Practice for Encryption and Management of Electronic Design Intellectual Property (IP) Sponsored by the Design Automation Standards Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 1735-2014 (Incorporates IEEE Std 1735-2014/Cor 1-2015) IEEE St

2、d 1735-2014(IncorporatesIEEE Std 1735-2014/Cor 1-2015)IEEE Recommended Practice for Encryption and Management of Electronic Design Intellectual Property (IP)SponsorDesign Automation Standards Committeeof theIEEE Computer SocietyApproved 10 December 2014IEEE SA-Standards BoardThe Institute of Electri

3、cal and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2015 by The Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 23 September 2015. Printed in the United States of America.IEEE, POSIX, and 802 are registered trademarks in the U

4、.S. Patent fitnessfor a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness ofmaterial. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS

5、.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that thereare no other ways to produce, test, measure, purchase, market, or provide other goods and services related tothe scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a st

6、andard is approved andissued is subject to change brought about through developments in the state of the art and commentsreceived from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or otherservices for, or on behalf of, any

7、person or entity nor is IEEE undertaking to perform any duty owed by anyother person or entity to another. Any person utilizing any IEEE Standards document, should rely upon hisor her own independent judgment in the exercise of reasonable care in any given circumstances or, asappropriate, seek the a

8、dvice of a competent professional in determining the appropriateness of a given IEEEstandard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DAT

9、A, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OROTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPONANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE A

10、NDREGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.ivCopyright 2015 IEEE. All rights reserved.TranslationsThe IEEE consensus development process involves the review of documents in English only. In the eventthat an IEEE standard is translated, only the English version published by IEEE should be co

11、nsidered theapproved IEEE standard.Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards BoardOperations Manual shall not be considered or inferred to be the official position of IEEE or any of itscommittees and shall not be considered to be

12、, or be relied upon as, a formal position of IEEE. At lectures,symposia, seminars, or educational courses, an individual presenting information on IEEE standards shallmake it clear that his or her views should be considered the personal views of that individual rather than theformal position of IEEE

13、. Comments on standardsComments for revision of IEEE Standards documents are welcome from any interested party, regardless ofmembership affiliation with IEEE. However, IEEE does not provide consulting information or advicepertaining to IEEE Standards documents. Suggestions for changes in documents s

14、hould be in the form of aproposed change of text, together with appropriate supporting comments. Since IEEE standards represent aconsensus of concerned interests, it is important that any responses to comments and questions also receivethe concurrence of a balance of interests. For this reason, IEEE

15、 and the members of its societies andStandards Coordinating Committees are not able to provide an instant response to comments or questionsexcept in those cases where the matter has previously been addressed. For the same reason, IEEE does notrespond to interpretation requests. Any person who would

16、like to participate in revisions to an IEEEstandard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USALaws and regulations Users of IEEE Standards documents sh

17、ould consult all applicable laws and regulations. Compliance with theprovisions of any IEEE Standards document does not imply compliance to any applicable regulatoryrequirements. Implementers of the standard are responsible for observing or referring to the applicableregulatory requirements. IEEE do

18、es not, by the publication of its standards, intend to urge action that is notin compliance with applicable laws, and these documents may not be construed as doing so.CopyrightsIEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.They are made availab

19、le by IEEE and are adopted for a wide variety of both public and private uses. Theseinclude both use, by reference, in laws and regulations, and use in private self-regulation, standardization,and the promotion of engineering practices and methods. By making these documents available for use andadop

20、tion by public authorities and private users, IEEE does not waive any rights in copyright to thedocuments.vCopyright 2015 IEEE. All rights reserved.Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license tophotocopy portions of any individual sta

21、ndard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission tophotocopy portions of any individual

22、 standard for educational classroom use can also be obtained throughthe Copyright Clearance Center.Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any timeby the issuance of new editions or may be amended from time to t

23、ime through the issuance of amendments,corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of thedocument together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a

24、document is more than ten yearsold and has not undergone a revision process, it is reasonable to conclude that its contents, although still ofsome value, do not wholly reflect the present state of the art. Users are cautioned to check to determine thatthey have the latest edition of any IEEE standar

25、d.In order to determine whether a given document is the current edition and whether it has been amendedthrough the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/expel/standards.jsp or contact IEEE at the address listed previously. For moreinfor

26、mation about the IEEE SA or IOWAs standards development process, visit the IEEE-SA Website athttp:/standards.ieee.org.Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged t

27、o check this URL for errataperiodically.PatentsAttention is called to the possibility that implementation of this standard may require use of subject mattercovered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to theexistence or validity of any pate

28、nt rights in connection therewith. If a patent holder or patent applicant hasfiled a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicatewhether th

29、e Submitter is willing or unwilling to grant licenses under patent rights without compensation orunder reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfairdiscrimination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for wh

30、ich a Letter of Assurance has not been received. The IEEE is notresponsible for identifying Essential Patent Claims for which a license may be required, for conductinginquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms orconditions provided in con

31、nection with submission of a Letter of Assurance, if any, or in any licensingagreements are reasonable or non-discriminatory. Users of this standard are expressly advised thatdetermination of the validity of any patent rights, and the risk of infringement of such rights, is entirely theirown respons

32、ibility. Further information may be obtained from the IEEE Standards Association.viCopyright 2015 IEEE. All rights reserved.ParticipantsIEEE Std 1735-2014The Electronic Design Intellectual Property (IP) Working Group is entity based. At the time this standardwas completed, the Electronic Design Inte

33、llectual Property (IP) Working Group had the followingmembership:Dave Graubart, ChairJoe Daniels, Technical Editor The following members of the entity balloting committee voted on this standard. Balloters may have votedfor approval, disapproval, or abstention. When the IEEE-SA Standards Board approv

34、ed this standard on 10 December 2014, it had the followingmembership:John Kulick, ChairJon Walter Rosdahl, Vice ChairRichard H. Hulett, Past ChairKonstantinos Karachalios, Secretary*Member EmeritusLuis Humberto Rezende BarbosaDave ClemansSteven DovichJeff FoxParminder GillSatyam JaniJarek KaczynskiR

35、ay MartinGael PaulRod PriceAdam ShererJohn ShieldsMichael SmithSourabh TandonRuchi TyagiAccellera Organization, Inc.ALDEC, Inc.Altera CorporationAtrenta Inc.Cadence Design Systems, Inc.Mentor GraphicsSynopsys, Inc.Xilinx Inc.Peter BalmaFarooq BariTed BurseClint ChaplainStephen DukesJean-Phillippe Fa

36、ureGary HoffmanMichael JanezicJeffrey KatzJoseph L. Koepfinger*David J. LawHung LingOleg LogvinovT. W. OlsenGlenn ParsonsRon PetersonAdrian StephensPeter SutherlandYatin TrivediPhil WinstonDon WrightYu YuanviiCopyright 2015 IEEE. All rights reserved.IEEE Std 1735-2014/Cor 1-2015At the time this stan

37、dard was completed, the Electronic Design Intellectual Property (IP) Working Grouphad the following membership:Dave Graubart, ChairJoe Daniels, Technical Editor The following members of the entity balloting committee voted on this standard. Balloters may have votedfor approval, disapproval, or abste

38、ntion. When the IEEE-SA Standards Board approved this standard on 3 September 2015, it had the followingmembership:John D. Kulick, ChairJon Walter Rosdahl, Vice ChairRichard H. Hulett, Past ChairKonstantinos Karachalios, Secretary*Member EmeritusLuis Humberto Rezende BarbosaDave ClemansSteven Dovich

39、Jeff FoxParminder GillSatyam JaniJarek KaczynskiRay MartinGael PaulRod PriceAdam ShererJohn ShieldsMichael SmithSourabh TandonRuchi TyagiAccellera Organization, Inc.ALDEC, Inc.Altera CorporationAtrenta Inc.Cadence Design Systems, Inc.Marvell Semiconductor, Inc.Mentor GraphicsMicron Technology, Inc.S

40、ynopsys, Inc.Xilinx Inc.Masayuki AriyoshiTed BurseStephen DukesJean-Philippe FaureJ. Travis GriffithGary HoffmanMichael Janezic Joseph L. Koepfinger*David J. LawHung LingAndrew MylesT. W. OlsenGlenn ParsonsRonald C. PetersenAnnette D. ReillyStephen J. ShellhammerAdrian P. StephensYatin TrivediPhilli

41、p WinstonDon WrightYu YuanDaidi ZhongviiiCopyright 2015 IEEE. All rights reserved.IntroductionThe purpose of this recommended practice is to provide guidance on protection of electronic designintellectual property (IP). The audience for this standard includes IP producers, IP consumers, vendors ofto

42、ols that process protected IP, and standards development groups for IP specification formats.When the electronic design automation (EDA) industry began creating standards for use in specifying,simulating, and implementing electronic circuits, there was no active market for the exchange of electronic

43、designs. As interest in software reuse developed, the EDA industry began to share design collateral as ameans of controlling the cost of development and managing the timeline for completing their designprojects. Because that shared IP had a measurable development cost, business leaders began to insi

44、st onrecovering those costs through licensing to other potential uses. Technical measures for IP protection weredeveloped to augment the legal contracts that governed such shared use.As the means for technical protection of IP proliferated, there was increased pressure to incorporate thattechnology

45、in the existing standards for representation of IP. Expertise in protection technologies (such asencryption) was scarce in those standards development organizations (SDOs), which resulted in a slow paceof development within a given standard and technical divergence as independent organizations attem

46、pted tosolve similar problems. As the marketplace for IP exchange continued to mature, concerns about technicalprotection of IP extended to include an interest in defining and managing the scope of use for protected IP.This standard has been created to consolidate EDA industry efforts to unify the t

47、echnical protections for IPand to guide SDOs in aligning their work for interoperability and compatibility. It is also intended to sharebest practices in IP protection for those who use standards that incorporate such technology, such as VHDL(IEC 61691-1-1, IEEE Std 1076) and SystemVerilog (IEEE Std

48、 1800).aCorrections were made to 7.4.3 as required by IEEE Std 1735-2014/Cor 1-2015.aInformation on references can be found in Clause 2.This introduction is not part of IEEE Std 1735-2014, IEEE Recommended Practice for Encryption andManagement of Electronic Design Intellectual Property (IP).ixCopyri

49、ght 2015 IEEE. All rights reserved.Contents1. Overview 11.1 Scope 11.2 Purpose, value, and approach. 21.3 Key characteristics of this standard 21.4 Conventions used in this standard 31.5 Use of color in this standard. 31.6 Contents of this standard 42. Normative references. 53. Definitions, acronyms, and abbreviations 53.1 Definitions 53.2 Acronyms and abbreviations 74. Trust model 84.1 Stakeholders . 84.2 Role of IP protection 84.3 Protection via encryption . 94.4 Components of trust . 105. Interoperability. 125.1 Background 125.2 version pragma . 125.3 Basic interoper