IEEE 1899-2017 en Guide for Establishing Basic Requirements for High-Voltage Direct-Current Transmission Protection and Control Equipment.pdf

1、IEEE Guide for Establishing Basic Requirements for High-Voltage Direct-Current Transmission Protection and Control Equipment IEEE Std 1899-2017 IEEE-SA Board of Governors Sponsored by the Corporate Advisory Group IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std 1899-2017 IEEE Guide for Establi

2、shing Basic Requirements for High-Voltage Direct-Current Transmission Protection and Control Equipment Sponsor Corporate Advisory Group of the IEEE-SA Board of Governors Approved 14 February 2017 IEEE-SA Standards BoardAbstract: The ac/dc substation control equipment, pole control equipment, protect

3、ion equipment, and auxiliary secondary equipment of high-voltage direct-current (HVDC) transmission systems are the focus of this guide. Based on analyzing the existing HVDC transmission projects, specifications for structure, configuration, performance and test of HVDC control and protection equipm

4、ent, which could be applied to HVDC transmission system with the voltage range up to and including 800 kV are provided in this guide. Keywords: ac substation control equipment, auxiliary secondary equipment, dc substation control equipment, HVDC transmission system, IEEE 1899, pole control equipment

5、 protection equipment The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 28 June 2017. Printed in the United States of America. IEEE is a

6、 registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supp

7、lied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the

8、viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or ot

9、her services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given ci

10、rcumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF

11、SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, E

12、VEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE W AS FORESEEABLE.4 Copyright 2017 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated,

13、only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE

14、 or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal vi

15、ews of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to

16、 IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also rece

17、ive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason,

18、IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscata

19、way, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible

20、 for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copy

21、righted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of en

22、gineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents.5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will

23、 grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive,

24、 Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents

25、may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or err

26、ata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the a

27、rt. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeex

28、plore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the f

29、ollowing URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of

30、this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website

31、at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free o

32、f any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into

33、the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that dete

34、rmination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.6 Copyright 2017 IEEE. All rights reserved. Participants At the time this IEEE guide was submitte

35、d to the IEEE-SA Standards Board for approval, the Basic Requirements for ultra high-voltage direct current (UHVDC) transmission control and protection Working Group had the following membership: Hong Rao, Chair Yijing Chen Chuang Fu Ying Huang Jingjing Li Ming Li Xiaolin Li Yan Li Tao Liu Y ulong M

36、a Xiaofeng Pan Ying Pu Hongxia Qin Zhe Si Y ongping Wang Yi Xiao Jiang Y u Ailing Zhang Wang Zhang Changchun Zhou Yan Zhou Rongsheng Zou The following members of the entity balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. ABB, Inc. Beijing S

37、ifang Automation Co., Ltd. China Datang Corporation China Energy Engineering Group Co., Ltd. China Southern Power Grid Co., Ltd. General Electric Jiangsu Shenma Electric Co., Ltd. Shanghai Jiao Tong University Siemens Corporation Southeast University, China Southwest Jiaotong University State Grid C

38、orporation of China (SGCC) Tsinghua University When the IEEE-SA Standards Board approved this guide on 14 February 2017, it had the following membership: Jean-Philippe Faure, Chair Vacant Position, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyosh

39、i Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Gary Hoffman Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Y u Y uan *Member

40、Emeritus7 Copyright 2017 IEEE. All rights reserved. Introduction This introduction is not a part of IEEE Std 1899-2017, IEEE Guide for Establishing Basic Requirements for High- V oltage Direct-Current Transmission Protection and Control Equipment. In recent decades, high-voltage direct-current (HVDC

41、) technology has become a very popular topic both in the academic world and the industrial world. Due to significant advances achieved in the development of high-power devices, HVDC transmission systems have been greatly promoted in todays electrical network. As one of the most important parts in an

42、 HVDC transmission system, the control and protection equipment plays an irreplaceable role to help ensure the systems stability, reliability, and safety. Although much work has been devoted to the control and protection equipment, unified international technical guidelines on control and protection equipment have not yet been established. Therefore, this guide is proposed where specifications are stated for structure, configuration, functionality, performance, and test of HVDC control and protection equipment.