IEEE 1909 1-2014 en IEEE Recommended Practice for Smart Grid Communications Equipment - Test Methods and Installation Requirements (IEEE Computer Society)《IEEE智.pdf

1、 IEEE Recommended Practice for Smart Grid Communications Equipment Test Methods and Installation Requirements Sponsored by the Power Line Communications Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Communications Society IEEE Std 1909.1-2014IEEE Std 1909.1-2014 IEEE Recommended Prac

2、tice for Smart Grid Communications EquipmentTest Methods and Installation Requirements Sponsor Power Line Communications Committee of the IEEE Communications Society Approved 3 November 2014 IEEE-SA Standards Board Abstract: Recommended in this document are practices for the testing and implementati

3、on of smart grid communication with regard to safety, electromagnetic compatibility, and environmental and mechanical requirements, but excluding interoperability. Keywords: communications, electromagnetic compatibility, environmental testing, IEEE 1909.1, installation requirements, mechanical testi

4、ng, safety, smart grid The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2014 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 19 December 2014. Printed in the United States of America. IEEE

5、is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are

6、supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore,

7、the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional o

8、r other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any give

9、n circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT

10、 OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDAR

11、D, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IE

12、EE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not

13、be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the f

14、ormal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions f

15、or changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of inte

16、rests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation

17、requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations U

18、sers of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the appli

19、cable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and internati

20、onal copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By maki

21、ng these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individu

22、al standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any in

23、dividual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended fro

24、m time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten y

25、ears. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of

26、any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previousl

27、y. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Use

28、rs are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence

29、 or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assuran

30、ce may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential P

31、atent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing ter

32、ms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such ri

33、ghts, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Copyright 2014 IEEE. All rights reserved. vi Participants At the time this IEEE recommended practice was completed, the Smart Grid Test and Implementation Working Group had the follow

34、ing membership: Aron Viner, Chair Yehuda Cern, Vice Chair Brett Kilbourne, Secretary Pete Abell James D. Allen John Banting Randy Brown Brent Cain John Egan Stefano Galli Mike Koch Anil Mengli Purva Rajkotia Sam Sciacca Mark Simon Jonathan Stewart David Su Shinji Tanabe Stephen Williams The followin

35、g members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. Osama Aboulmagd William Ackerman James D. Allen Stefan Aust John Banting Ulrich Berold James Bougie William Bush William Byrd Brent Cain Yehuda Cern

36、Charles Cook Brian Cramer Ray Davis Grazia DElia Patrick Diamond Randall Dotson Richard Edgar John Egan Paul Eglitis Gene Falendysz Doaa Galal Alexander Gelman Tim Godfrey Randall Groves Jon Hagar Marco Hernandez Noriyuki Ikeuchi Song Jin Stuart Kerry Yuri Khersonsky Brett Kilbourne Jim Kulchisky Gr

37、eg Luri Jose Morales Michael Newman Nick S. A. Nikjoo Yoshihiro Ohba Vladimir Oksman Richard Paes Ghery Pettit Henry Pinto Venkatesha Prasad Purva Rajkotia Daniel Leland Ransom Ram Das Rao Markus Rindchen Charles Rogers Benjamin Rolfe Shigenobu Sasaki Bartien Sayogo Mark Simon Daniel Smolinski John

38、Spare Thomas Starai Michael Stelts Jonathan Stewart Walter Struppler Michael Swearingen Shinji Tanabe John Tengdin Maher Umari Aron Viner George Vlantis Khurram Waheed Matthew Wakeham James June Wang Lisa Ward Hung-Yu Wei Yingli Wen Stephen Williams Scott Willy Dave Wilson Daidi Zhong When the IEEE-

39、SA Standards Board approved this recommended practice on 3 November 2014, it had the following membership: John Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Peter Balma Farooq Bari Ted Burse Clint Chaplin Stephen Dukes Jean-Philippe F

40、aure Gary Hoffman Michael Janezic Jeffrey Katz Copyright 2014 IEEE. All rights reserved. vii Joseph L. Koepfinger* David J. Law Hung Ling Oleg Logvinov T. W. Olsen Glenn Parsons Ron Petersen Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Don Wright Yu Yuan *Member Emeritus Also included

41、 are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Julie Alessi IEEE-SA Content Publishing Lisa Perry IEEE-SA Standards Technical Community Copyright 2014 IEEE. All rights reserved. viii Introduction This introduct

42、ion is not part of IEEE Std 1909.1-2014, IEEE Recommended Practice for Smart Grid Communications EquipmentTest Methods and Installation Requirements. This document covers recommended practice for the testing and installation of different types of smart grid communication equipment in power generatio

43、n, transmission, and distribution facilities as well as commercial establishments and the home environment according to national and international standards. The recommended practice includes the safety, EMC, environmental, and mechanical battery of tests but excludes interoperability testing and ve

44、rification of product compliance to its original performance specification. Copyright 2014 IEEE. All rights reserved. ix Contents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 1 2. Normative references 2 3. Definitions and acronyms . 4 3.1 Definitions . 4 3.2 Acronyms 5 4. Smart grid communications equipm

45、ent typical installations 5 5. Equipment categories . 7 5.1 In-premises communications equipment . 7 5.2 Distribution line communications equipment 7 5.3 Generation, transmission, and substation communications equipment 7 5.4 Auxiliary equipment 7 6. Performance criteria . 8 6.1 Performance criterio

46、n A 8 6.2 Performance criterion B . 8 6.3 Performance criterion C . 9 7. Environment . 9 7.1 Weatherprotected environments 9 7.2 Non-weatherprotected environments 11 8. Product safetyelectrical14 8.1 Dielectric power frequency test 14 8.2 Earthing and bonding 14 8.3 Temporary overloads 14 8.4 Measur

47、ement function testing .15 9. Electromagnetic compatibility .15 9.1 Surge immunity test 15 9.2 Electrical oscillatory SWC test .15 9.3 Electrical fast transient/burst 17 9.4 Electrostatic discharge 19 9.5 Voltage dips and interruption .19 9.6 Radiated immunity test methods and criteria 20 9.7 Conduc

48、ted immunity testing .20 9.8 Magnetic field immunity 21 9.9 Radiated emissions test methods and criteria .21 9.10 Conducted emissions test methods and criteria 22 9.11 Human exposure to electromagnetic fields .22 10. Installation process 22 10.1 General requirements 22 10.2 Joint use of structures .

49、22 10.3 Communications protective requirements 22 10.4 Communications circuits within the supply space 23 Copyright 2014 IEEE. All rights reserved. x 10.5 Electrical vs. communications space 23 10.6 Grounding and bonding 23 10.7 Fusing and power disconnection .23 10.8 Hazards .23 10.9 Labeling 23 Annex A (informative) Bibliography 24 Annex B (informative) Applicability of tests of equipment used in different environments.26 Copyright 2014 IEEE. All rights reserved. 1 IEEE Recommended Practice for Smart Grid Communications EquipmentTest Methods and Installation