IEEE 21451-001-2017 en Recommended Practice for Signal Treatment Applied to Smart Transducers.pdf

1、IEEE Recommended Practice for Signal Treatment Applied to Smart TransducersIEEE Std 21451-001-2017IEEE Industrial Electronics SocietySponsored by theIndustrial Electronics Society Standards CommitteeIEEE Instrumentation and Measurement SocietySponsored by theSensor Technology Committeeand theSignals

2、 and Systems in Measurement CommitteeIEEE3 Park AvenueNew York, NY 10016-5997USAIEEE Std 21451-001-2017 IEEE Recommended Practice for Signal Treatment Applied to Smart Transducers Sponsors Industrial Electronics Society Standards Committee of the IEEE Industrial Electronics Society and Sensor Techno

3、logy Committee and Signals and Systems in Measurement Committee of the IEEE Instrumentation and Measurement Society Approved 23 March 2017 IEEE-SA Standards Board 2 Copyright 2017 IEEE. All rights reserved. Abstract: Signal processing algorithms and data structure are defined in this recommended pra

4、ctice in order to share and to infer signal and state information of an instrumentation or control system. These algorithms are based on the signal and transducers attached to the system. This recommended practice also defines a set of transducer signal treatment services based on signal treatment a

5、lgorithms as application programming interface (API), which is used for applications to use or call these transducer signal treatment services. Keywords: IEEE 1451, IEEE 21451, oversampling, segmentation, serial, signal shape analysis, smart actuator, smart filtering, smart sensor, smart transducer,

6、 time-domain signal analysis The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 20 December 2017. Printed in the United States of America.

7、 IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards document

8、s are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Further

9、more, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professi

10、onal or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in an

11、y given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCU

12、REMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY S

13、TANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. 4 Copyright 2017 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is tr

14、anslated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official positi

15、on of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the p

16、ersonal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice per

17、taining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions

18、 also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the sam

19、e reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes La

20、ne Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are r

21、esponsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standard

22、s are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promo

23、tion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. 5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee

24、, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rose

25、wood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these

26、 documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrige

27、nda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present sta

28、te of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at h

29、ttp:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at th

30、e following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this

31、 standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at ht

32、tp:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair d

33、iscrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal vali

34、dity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of t

35、he validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. 6 Copyright 2017 IEEE. All rights reserved. Participants At the time this recommended practice was completed,

36、the Signal Treatment for Smart Transducer Working Group had the following membership: Gustavo Monte, Chair Ruqiang Yan, Vice Chair Francesco Abate Allen Chen Antonio Espirito Santo Sabrina Guia Rodica Holonec Victor Huang Kang Lee Zheng Liu Vincenzo Paciello Antonio Pietrosanto Helena Ramos Eugene S

37、ong Hubert Zangl The following members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. Mihaela Albu Frank Basciano William Bloethe Riccardo Brama Dietmar Bruckner Paul Cardinal Cheng-Jen Chen Keith Chow Hele

38、na Maria Geirinhas Ramos Randall Groves Werner Hoelzl Rodica Holonec Victor Huang Atsushi Ito Robert Johnson Kenneth Karg John Kay Kang Lee Michael Maytum Tremont Miao Gustavo Monte Arthur Neubauer Michael Newman Vincenzo Paciello Sergio Rapuano Robert Robinson Bartien Sayogo Christopher Searles Rob

39、ert Seitz Suresh Shrimavle Jeremy Smith Yuyin Song Joseph Stanco Thomas Strasser John Vergis Stephen Webb Ruqiang Yan Oren Yuen When the IEEE-SA Standards Board approved this recommended practice on 23 March 2017, it had the following membership: Jean-Philippe Faure, Chair Gary Hoffman, Vice Chair J

40、ohn D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley

41、 Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Yu Yuan *Member Emeritus 7 Copyright 2017 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 21451-001-2017, IEEE Recommended Practice for Signal Treatment Applied to Smart Transducers. IEEE Std 21451-001, a re

42、commended practice, defines signal processing algorithms and data structure in order to share and infer signal and state information of instrumentation or control systems. These algorithms are based on acquired signals and the transducers attached to the systems. This recommended practice also defin

43、es the commands and responses for requesting information and algorithms for shape analysis, such as exponential, sinusoidal, impulsive noise, noise, and tendency. 8 Copyright 2017 IEEE. All rights reserved. Contents 1. Overview 10 1.1 Scope . 10 1.2 Purpose 10 1.3 Conformance . 10 2. Normative refer

44、ences 11 3. Definitions, abbreviations, and units 11 3.1 Definitions . 11 3.2 Abbreviations 11 3.3 Units 12 4. Need for the recommended practice . 12 4.1 Introduction . 12 4.2 A Simple example of application. 14 4.3 Outline of the recommended practice 14 5. Smart transducer functional specification

45、15 5.1 ISO/IEC/IEEE 21451 reference model 15 5.2 Users network . 15 5.3 NCAP network interface 16 5.4 ISO/IEC/IEEE 21450 NCAP transducer services 16 5.5 ISO/IEC/IEEE 21450/IEEE 1451.X NCAP module communication interface . 16 5.6 Physical interface between NCAP and TIM 16 5.7 ISO/IEC/IEEE 21450/IEEE

46、1451.X TIM communication interface . 16 5.8 ISO/IEC/IEEE 21450 TIM transducer services . 16 5.9 IEEE 21451-001 TIM transducer signal treatment services 16 5.10 Signal conditioner and data conversion . 17 5.11 Transducers 17 6. Algorithms for signal description . 17 6.1 Introduction . 17 6.2 Segmenta

47、tion algorithm . 17 6.3 Labeling description 19 6.4 Algorithm for real-time segmentation and labeling (RTSAL) . 22 6.5 Description of RTSAL algorithm 24 7. Transducer signal features extraction . 24 7.1 Introduction . 24 7.2 Initial parameters . 25 7.3 Variable definitions . 25 8. First layer algori

48、thms 26 8.1 Introduction . 26 8.2 First layer functions . 26 8.3 Exponential pattern detection 26 8.4 Noise detection 28 8.5 Impulsive noise detection 32 8.6 Sinusoidal pattern detection . 35 8.7 Tendency estimation 40 8.8 Mean estimation 42 9 Copyright 2017 IEEE. All rights reserved. 9. Services re

49、quired for the first layer algorithms 43 10. Prediction 44 10.1 Introduction . 44 10.2 Steady-state signal value estimation 44 10.3 Prediction for damped oscillations 46 11. Filtering 46 11.1 General 46 11.2 Filtering based on iteration selection . 49 12. Compression . 53 12.1 General 53 12.2 Example . 53 12.3 Algorithm 55 13. Complex pattern analysis: impulsive-like signals 58 13.1 Detection of QRS pattern in ECG signals 58 13.2 Unexpected segments 59 14. User-defined application code 61 15. Transducer algorithm data sheet (TADS) . 61 16. IEEE 21451-001 transducer s