IEEE 3001 2-2017 en Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems.pdf

1、Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems IEEE Std 3001.2 -2017 IEEE 3001 STANDARDS: POWER SYSTEMS DESIGNIEEE Std 3001.2-2017 IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commer

2、cial Power Systems Sponsor Technical Books Coordinating Committee of the IEEE Industry Applications Society Approved 6 December 2017 IEEE-SA Standards BoardAbstract: Commercial, institutional, and industrial design of electrical services, interconnecting with a utility distribution or transmission s

3、ystem is explored. The electrical system information needed by the designer concerning the utilitys system characteristics, and the electrical load information needed by the utility to design a satisfactory electrical interface between the serving utility and the premise electrical distribution syst

4、em is considered. Keywords: electric rates, IEEE 3001.2, service, service entrance, substation, utility metering, utility billing, vaults The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institute of Electrical and Electron

5、ics Engineers, Inc. All rights reserved. Published 10 May 2018. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEE

6、E disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure,

7、purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the

8、standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards

9、 document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT,

10、INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY , OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY , WHETHER IN CONTRACT, STRICT LIABILITY , OR TORT (I

11、NCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of docu

12、ments in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.4 Copyright 2017 IEEE. All rights reserved. Official statements A statement, written or oral, that is not processed in accordance with t

13、he IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual pre

14、senting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardles

15、s of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards

16、represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response

17、to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments

18、 on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards docume

19、nt does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicab

20、le laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, b

21、y reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the docu

22、ments. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please co

23、ntact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.5 Copyright 2017 IEEE. All rights rese

24、rved. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at

25、any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reasonab

26、le to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it h

27、as been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ ieeexplore .ieee .or g/ xpl/ standards .jsp or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-S

28、A Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata periodically. Patents Attention is calle

29、d to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent

30、 applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licens

31、es under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received.

32、 The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assura

33、nce, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtain

34、ed from the IEEE Standards Association.6 Copyright 2017 IEEE. All rights reserved. Participants At the time this IEEE recommended practice was completed, the Power System Design Editorial Working Group had the following membership: Gary H. Fox, Chair Robert Arno Neal Dowling Nehad El-Sherif Barry Ho

35、rnberger Duane Leschert Dennis K. Neitzel Amol Pathak Marcelo Valdes The following members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. Frank Basciano Sirak Belayneh Frederick Brockhurst Gustavo Brunello

36、William Byrd Paul Cardinal Kurt Clemente Glenn Davis Davide De Luca Neal Dowling Gary Fox Randall Groves Chris Heron Werner Hoelzl Robert Hoerauf Laszlo Kadar Gael Kennedy Yuri Khersonsky Jim Kulchisky Saumen Kundu Marc Lacroix Benjamin Lanz Wei-Jen Lee Duane Leschert John Mcalhaney Jr. William McBr

37、ide John McClelland Massimo Mitolo Daleep Mohla Jerry Murphy Daniel Neeser Dennis K. Neitzel Michael Newman Joe Nims Gearold O. H. Eidhin T. W . Olsen Lorraine Padden Antony Parsons Jim Phillips Louie Powell Iulian Profir Moises Ramos Charles Rogers Vincent Saporita Bartien Sayogo Ted Schoenberg Rob

38、ert Seitz Nikunj Shah Jeremy Smith Jerry Smith Gary Smullin Wayne Stec K. Stump David Tepen Marcelo Valdes Kenneth White James Wolfe Jian Yu When the IEEE-SA Standards Board approved this recommended practice on 6 December 2017, it had the following membership: Jean-Philippe Faure, Chair Gary Hoffma

39、n, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson

40、Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Yu Yuan *Member Emeritus7 Copyright 2017 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 3001.2-2017, IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial

41、 and Commercial Power Systems. IEEE 3000 Standards Collection This recommended practice was developed by the Technical Books Coordinating Committee of the Industrial and Commercial Power Systems Department of the Industry Applications Society, as part of a project to repackage IEEEs popular series o

42、f IEEE Color Books. The goal of this project is to speed up the revision process, eliminate duplicate material, and facilitate use of modern publishing and distribution technologies. When this project is completed, the technical material included in the 13 Color Books will be included in a series of

43、 new standardsthe most significant of which will be a new book, IEEE Standard 3000, IEEE Recommended Practice for the Engineering of Industrial and Commercial Power Systems. The new standard will cover the fundamentals of planning, design, analysis, construction, installation, start-up, operation, a

44、nd maintenance of electrical systems in industrial and commercial facilities. Approximately 60 additional dot standards, organized into the following categories, will provide in-depth treatment of many of the topics introduced by IEEE Std 3000: Power Systems Design (3001 series) Power Systems Analys

45、is (3002 series) Power Systems Grounding (3003 series) Protection and Coordination (3004 series) Emergency, Standby Power, and Energy Management Systems (3005 series) Power Systems Reliability (3006 series) Power Systems Maintenance, Operations, and Safety (3007 series) In many cases, the material i

46、n a “dot” standard comes from a particular chapter of a particular color book. In other cases, material from several color books has been combined into a new “dot” standard. The material in this recommended practice largely comes from Chapter 2 and Chapter 15 of the IEEE Red Book, IEEE Std 141-1993,

47、 Recommended Practice for Electric Power Distribution in Industrial Plants, and Chapter 4 and Chapter 7 of the IEEE Gray Book, IEEE Std 241-1990. IEEE Std 3001.2 This publication provides a recommended practice for the electrical design of commercial and industrial facilities. It is likely to be of

48、greatest value to the power-oriented engineer with limited commercial or industrial plant experience. It can also be an aid to all engineers responsible for the electrical design of commercial and industrial facilities. However, it is not intended as a replacement for the many excellent engineering

49、texts and handbooks commonly in use, nor is it detailed enough to be a design manual. It should be considered a guide and general reference on electrical design for commercial and industrial facilities. Tables, charts, and other information that have been extracted from codes, standards, and other technical literature are included in this publication. Their inclusion is for illustrative purposes; where technical accuracy is important, the latest version of the referenced document should be consulted to assure use of complete, up- to-date, and accurat