IEEE 352-1987 en Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems《核电站安全系统可靠度分析通用原则指南》.pdf

1、Corrected EditionISBN 0-471-60205-1Library of Congress Catalog Number 87-045994Copyright 1987The Institute of Electrical and Electronics Engineers, Inc.345 East 47th Street, New York, NY 10017 USANo part of this publication may be reproduced in any form, in an electronic retrieval system or otherwis

2、e, without the prior written permission of the publisher.ANSI/IEEE Std 352-1987 (R2010)(Revision of ANSI/IEEE Std 352-1975)An American National StandardIEEE Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety SystemsSponsorNuclear Power Engineering Committ

3、eeof theIEEE Power Engineering SocietyReaffirmed 25 March 2010Approved June 13, 1985IEEE-SA Standards BoardReaffirmed 24 March 2005Approved November 21, 1985American National Standards InstituteIEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees

4、 of theIEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus develop-ment process, approved by the American National Standards Institute, which brings together volunteers representing variedviewpoints and interests to achieve the final product. Vol

5、unteers are not necessarily members of the Institute and serve with-out compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus devel-opment process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the informati

6、on containedin its standards.Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or other dam-age, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resultingfrom the publication, use of

7、 or reliance upon this, or any other IEEE Standard document.The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly disclaimsany express or implied warranty, including any implied warranty of merchantability or fitness for a specific purpose, o

8、r thatthe use of the material contained herein is free from patent infringement. IEEE Standards documents are supplied “AS IS.”The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market,or provide other goods and services related to the

9、scope of the IEEE Standard. Furthermore, the viewpoint expressed at thetime a standard is approved and issued is subject to change brought about through developments in the state of the art andcomments received from users of the standard. Every IEEE Standard is subjected to review at least every fiv

10、e years for revi-sion or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to concludethat its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to checkto determine that they have th

11、e latest edition of any IEEE Standard.In publishing and making this document available, the IEEE is not suggesting or rendering professional or other servicesfor, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any other person orentity to another. Any

12、person utilizing this, and any other IEEE Standards document, should rely upon the advice of a com-petent professional in determining the exercise of reasonable care in any given circumstances.Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they re

13、late to specificapplications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepareappropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that anyinterpretation has also receiv

14、ed the concurrence of a balance of interests. For this reason, IEEE and the members of itssocieties and Standards Coordinating Committees are not able to provide an instant response to interpretation requestsexcept in those cases where the matter has previously received formal consideration. Comment

15、s for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliation withIEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriatesupporting comments. Comments on standards and requests for interpr

16、etations should be addressed to:Secretary, IEEE-SA Standards Board445 Hoes LanePiscataway, NJ 08854USAAuthorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute ofElectrical and Electronics Engineers, Inc., provided that the appropriate fe

17、e is paid to Copyright Clearance Center. Toarrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive,Danvers, MA 01923 USA; (978) 750-8400. Permission to photocopy portions of any individual standard for educationalclassroom use can also be

18、 obtained through the Copyright Clearance Center.Note: Attention is called to the possibility that implementation of this standard may require use of subject mat-ter covered by patent rights. By publication of this standard, no position is taken with respect to the existence orvalidity of any patent

19、 rights in connection therewith. The IEEE shall not be responsible for identifying patentsfor which a license may be required by an IEEE standard or for conducting inquiries into the legal validity orscope of those patents that are brought to its attention.iiiForeword(This Foreword is not a part of

20、ANSI/IEEE Std 352-1987, IEEE Guide for General Principles of Reliability Analysis of NuclearPower Generating Station Safety Systems.)This document is basically tutorial and has been prepared to provide the user with the basic principles that are neededto conduct a reliability analysis of safety syst

21、ems. It is not expected or intended that any individual or organizationwould need all of the principles that are presented. For example, an organization may be concerned with quantitativeanalysis and mathematical modeling as discussed in Section 5. The very important problem of failure data is discu

22、ssedin Section 6.; the material on probability distributions, estimation, and condence intervals may be used by those whoare concerned with analysis and evaluation of failure and repair rate data that will be accumulated as nuclear powergenerating station operating experience is accrued. The materia

23、l on established data programs may be of moreimmediate use to those who make reliability or availability predictions on current safety system designs.This document was originally prepared to provide a common and consistent means of reliability analysis for protectionsystems covered by IEEE Std 279-1

24、971, Criteria for Protection Systems for Nuclear Power Generating Stations. In theintervening years, Standard 279 has been superseded by Standard 603, and in March, 1984, Standard 279 waswithdrawn. This standard has been expanded in revisions since 1971 to include many technical areas as they havebe

25、come important. In accord with the current version of Standard 603, IEEE Std 603-1980, it has been generalized toapply to safety systems.The general principles presented in this document, and further information given by the references, are sufcient toconduct the reliability/availability analyses of

26、 safety systems, but not every analysis will necessarily employ all of thegeneral principles that are presented. Furthermore, the principles contained herein are not necessarily limited tonuclear power plant safety systems. They may be applied, as applicable, to the analyses of other systems. The us

27、ersmay select those parts of the document that apply to their particular problem.The current revision of this document contains much updated information and clarication, but adheres to the generalprinciples put forth in previous editions.The IEEE will update this document as the state of the technol

28、ogy changes. Comments and suggestions for additionalmaterial to be added should be addressed to the Secretary of the IEEE Standards Board.This document was prepared by Subcommittee 5, Reliability, of the Nuclear Power Engineering Committee of theIEEE Power Engineering Society. The members of the wor

29、king group and other major contributors were as follows:R. L. Olson, Chair F. J. BalohR. G. EasterlingW. C. GangloffS. H. HanauerI. M. JacobsH. T. MartzE. NommJ. R. PenlandF. RosaB. M. TashjianM. I. TemmeI. B. WallJ. J. WroblewskiAuthorized licensed use limited to: IEEE Standards Staff. Downloaded o

30、n July 15, 2009 at 14:32 from IEEE Xplore. Restrictions apply.ivAt the time this guide was approved, the members of the subcommittee were follows:W. C. Gangloff, Chair P. F. AlbrechtA. BarchasL. E. BoothF. ChamowK. ComerW. I. CrowleyD. FinnicumJ. R. FragolaJ. F. FussellP. HassW. HannamanB. W. LoganW

31、 J. Luckas, Jr.R. MilesS. P. MitraP. K. NiyogiR. L. OlsonE. S. PattersonJ. W PegramJ. R. PenlandJ. PittmanS. ReizensteinF. RosaB. M. TashjianM. I. TemmeE. WittryJ. J. WroblewskiAt the time this guide was approved, the members of the Nuclear Power Engineering Committee were as follows:R. E. Allen, C

32、hair B. M. Rice, Vice Chair G. R. Leidich, Secretary J. T. Bauer, Vice Chairman and Standards CoordinatorJ. F. BatesT. M. Bates, Jr.F. D. BaxterR. G. BanhamJ. T. BoettgerD. F. BrosnanW. BuxtonD. G. CainF. W. ChandlerC. M. ChiappettaR. P. DaigleE. F. DowlingJ. J. FerencsikE. P. FogartyJ. M. Gallagher

33、W. C. GangloffJ. B. GardnerL. HanesI. M. JacobsR. F. KarlicekA. LairdD. C. LamkenP. G. LyonsL. C. MadisonT. J. McGrathW. E. ONealR. W. PackM. PaiA. PetrizzoE. S. PattersonJ. R. PenlandN. S. PorterW. S. RautioH. V. RedgateA. R. RobyW. F. SailerW. G. SchwartzA. J. SpurginL. StanleyD. F. SullivanP. Sza

34、badosL. D. TestJ. E. ThomasT. R. VadaroF. J. VolpeThe following persons were on the balloting committee that approved this document for submission to the IEEEStandards Board:R. E. AllenJ. T. BauerF. D. BaxterR. G. BenhamD. F. BrosnanW. E. BuxtonF. W. ChandlerR. P. DaigleE. F. DowlingJ. J. FerencsikE

35、 P. FogartyJ. M. GallagherW. C. GangloffJ. B. GardnerL. C. GonzalezB. GrimR. E. HallL. HanesG. K. HenryR. F. KarlicekJ. T. KeiperT. S. KillenA. LairdD. C. LamkenG. R. LeidichP. C. LyonsW. E. ONealR. W. PackM. PaiJ. R. PenlandC. A. PetrizzoN. S. PorterW. S. RautioH. V. RedgateB. M. RiceA. R. RobyZ.

36、SabriW. F. SAilerA. J. SpurginL. StanleyD. F. SullivanP. SzabadosW. G. SchwartzL. D. TestJ. E. ThomasT. R. VardaroF. J. VolpeAuthorized licensed use limited to: IEEE Standards Staff. Downloaded on July 15, 2009 at 14:32 from IEEE Xplore. Restrictions apply.vWhen the IEEE Standards Board approved thi

37、s standard on June 13, 1985, it had the following membership:John E. May, Chair John P. Riganati, Vice Chair Sava I. Sherr, Secretary James H. BeallFletcher J. BuckleyRene CastenschioldEdward ChelottiEdward J. CohenPaul G. CummingsDonald C. FleckensteinJay ForsterDaniel L. GoldbergKenneth D. Hendrix

38、Irvin N. HowellJack KinnJoseph L. Koepfinger*Irving KolodnyR. F. LawrenceLawrence V. McCallDonald T. Michael*Frank L. RoseClifford O. SwansonJ. Richard WegerW. B. WilkensCharles J. Wylie* Member emeritusAuthorized licensed use limited to: IEEE Standards Staff. Downloaded on July 15, 2009 at 14:32 fr

39、om IEEE Xplore. Restrictions apply.viCLAUSE PAGE1. Introduction and References .11.1 Introduction 11.2 References 12. Definitions.43. Objectives and Methods53.1 Consideration of the Human Factor . 53.2 Qualitative Analysis. 63.3 Quantitative Analysis. 63.4 Applications of Reliability Methodology 74.

40、 Qualitative Analysis Principles.94.1 Failure Mode and Effects Analysis (FMEA) . 94.2 Fault Tree Analysis 144.3 Reliability Block Diagram . 194.4 Example . 214.5 Extended Qualitative Analysis for Common-Cause Failures 225. Quantitative Analysis Principles.285.1 Mission Definition . 285.2 Mathematica

41、l Modeling . 315.3 Tabular Reference to Popular Logic Configurations . 455.4 Trial Calculations. 465.5 Credibility Check of Results 466. Guides for Data Acquisition and Use .486.1 Input Parameters 486.2 Probability Distributions, Parameters, and Estimation 506.3 Established Data Programs 566.4 Devel

42、oping Field Data Programs. 607. Application of Reliability Methods.657.1 Introduction 657.2 Numerical Goals 667.3 Selection of the Modeling Technique 677.4 Fault Tree Techniques 687.5 The Markov Process as a Reliability Model 697.6 Equipment and System Testing 728. Annex (Informative) .77Authorized

43、licensed use limited to: IEEE Standards Staff. Downloaded on July 15, 2009 at 14:32 from IEEE Xplore. Restrictions apply.Copyright 1987 IEEE All Rights Reserved1An American National StandardIEEE Guide for General Principles ofReliability Analysis of Nuclear Power Generating Station Safety Systems1.

44、Introduction and References1.1 IntroductionThis guide was prepared to provide the designers and operators of nuclear power plant safety systems and theconcerned regulatory groups with the essential methods and procedures of reliability engineering that are applicable tosuch systems. By applying the

45、principles given, systems may be analyzed, results may be compared with reliabilityobjectives, and the basis for decisions may be suitably documented.The quantitative principles are applicable to the analysis of the effects of component failures on safety systemreliability. The principles are applic

46、able during any phase of the systems lifetime. They have their greatest valueduring the design phase. During this phase, reliability engineering can make the greatest contribution towardenhancing safety.These principles may also be applied during the preoperational phase or at any time during the no

47、rmal lifetime of asystem. When the principles are applied during either of these two phases, they will aid in the evaluation of systems,in the preparation or revision of operating or maintenance procedures, and in improving test programs. Although notinherently limited, these principles are intended

48、 for application to systems covered in the scope of ANSI/IEEE Std603-1980 511.2 ReferencesThe following publications shall be used in conjunction with this standard:1 ANSI/ANS 51.1-1983, American National Standard for Nuclear Safety Criteria for the Design of StationaryPressurized Water Reactor Plan

49、ts.2 ANSI/ANS 52.1-1983, American National Standard for Nuclear Safety Criteria for the Design of StationaryBoiling Water Reactor Plants.21The numbers in brackets correspond to those of the references listed in 1.2.2ANSI/ANS publications can be obtained from the Sales Department, American National Standards Institute, 1430 Broadway, New York, NY10018, or from the American Nuclear Society, 555 North Kensington Avenue, La Grange Park, IL 60525.Authorized licensed use limited to: IEEE Standards Staff. Downloaded on July 15, 2009 at 14:32 from IEEE Xplore. Restrictions appl