IEEE 497-2016 en Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations《核电站事故监测仪器装置标准》.pdf

1、 IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations Sponsored by the Nuclear Power Engineering Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std 497-2016 (Revision of IEEE Std 497-2010) IEEE Std 497-2016

2、(Revision of IEEE Std 497-2010) IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations Sponsor Nuclear Power Engineering Committee of the IEEE Power and Energy Society Approved 15 May 2016 IEEE-SA Standards Board Abstract: Established in this standard ar

3、e criteria for variable selection, performance, design, and qualification of accident monitoring instrumentation for anticipated operational, design basis events and severe accidents. Keywords: accident monitoring, design criteria, display criteria, IEEE 497, performance criteria, selection criteria

4、, severe accidents, type variables The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2016 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 29 July 2016. Printed in the United States of Americ

5、a. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards docume

6、nts are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furth

7、ermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering profes

8、sional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in

9、any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PRO

10、CUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY

11、 STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version publish

12、ed by IEEE should be considered the approved IEEE standard. 3 Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and

13、shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather

14、than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Sug

15、gestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balan

16、ce of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to inter

17、pretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and reg

18、ulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to

19、 the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and

20、 international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and method

21、s. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of an

22、y individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions

23、 of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. 4 Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be

24、 amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least

25、 every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest

26、 edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/Xplore/home.jsp or contact IEEE at the address listed

27、 previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index

28、.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the

29、 existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters

30、of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. E

31、ssential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any lic

32、ensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement

33、of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. 5 Participants At the time this IEEE standard was completed, the Accident Monitoring Instrumentation Working Group had the following membership: Greg M. Hostetter, Chair Dar

34、yl Harmon, Vice Chair Michiaki Akiyama Jeri Chadwick Alexander Duchac James Gleason Takeshi Ikeuchi Gary Johnson Jason Karns Alex Klemptner Wolfgang Koenig Ifti Rana Yumi Sato Deirdre Spaulding-Yeoman Steve Wyman The following members of the individual balloting committee voted on this standard. Bal

35、loters may have voted for approval, disapproval, or abstention. William Ackerman Satish Aggarwal George Ballassi Royce Beacom William Bloethe Thomas Brewington Daniel Brosnan Nissen Burstein Robert Carruth Suresh Channarasappa Weijen Chen Tom Crawford John Disosway Stephen Fleger James Gleason Randa

36、ll Groves Ajit Gwal Daryl Harmon Hamidreza Heidarisafa Raymond Herb David Herrell Werner Hoelzl David Horvath Greg M. Hostetter Gary Johnson Piotr Karocki Robert Konnik Thomas Koshy G. Lang Jang-Soo Lee William Lumpkins John Macdonald Phillip McClure Kirklyn Melson Michael Newman Warren Odess-Gillet

37、t Jan Pirrong Robert Queenan Ted Riccio Bartien Sayogo Deirdre Spaulding-Yeoman Rebecca Steinman John Stevens John Vergis John White Yvonne Williams Shuhui Zhang When the IEEE-SA Standards Board approved this standard on 15 May 2016, it had the following membership: Jean-Philippe Faure, Chair Ted Bu

38、rse, Vice Chair John Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Stephen Dukes Jianbin Fan J. Travis Griffith Gary Hoffman Ronald W. Hotchkiss Michael Janezic Joseph L. Koepfinger* Hung Ling Kevin Lu Annette D. Reilly Gary Robinson Mehmet Ulema Yingli Wen Phi

39、lip Winston Howard Wolfman Don Wright Yu Yuan Daidi Zhong *Member Emeritus 6 Copyright 2016 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 497-2016, IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations. History This s

40、tandard evolved from IEEE Std 497-2010 B41. It represents a continued effort by IEEE to support the specification, design, and implementation of accident monitoring instrumentation of nuclear power generating stations. IEEE Std 497-2010 B4 was developed to provide criteria for advanced instrumentati

41、on system designs and design modifications based on modern digital technology. It marked a clear path forward for the application of new technology. Though still maintaining applicability to existing systems, this version of IEEE Std 497 provides more current guidance based on historically related s

42、tandards and guidance. It was the working groups intention that the criteria of this standard address the variety of possible accident monitoring channel configurations that current technology affords. It was also the working groups intention to address the display of information using computer gene

43、rated displays and calculated values. The criteria presented in this standard provide guidance in this area without limiting the types of displays that can be made available to accident management personnel. Although written primarily for new plant designs, existing plants may also use the guidance

44、and applicable criteria in this standard. The use of applicable plant procedures to determine the requirements of the accident monitoring instrumentation provides the necessary flexibility for useful design criteria. This standard can be used to help address the necessary changes to the plant config

45、uration that occur over the operating life of any plant. Historically the standard addressed accident monitoring instrumentation used for anticipated operating occurrences (AOOs) and design basis events (DBEs). To address lessons learned from various industry events, the scope of this standard has e

46、volved to now include severe accidents. This evolution was intended to provide a broader applicability to cover both preventative and mitigative phases of potential plant events. A broader applicability of the standard was also achieved by moving to a more international, technology neutral approach

47、to the standard. This approach was achieved by changing to International Atomic Energy Agency (IAEA) definitions of terms, where applicable; the removal, where appropriate, of U.S. specific references; and involvement in the working group of members of other standards organizations. Furthermore, the

48、 corresponding International Electrotechnical Commission (IEC) counterparts to the IEEE standards referenced were investigated and introduced as a second set of normative references. This opens the possibility to apply this standard in the IEC domain. The individual IEEE and IEC reference sets in wh

49、ole are individually appropriate for use in the application of the standard, but inclusion of the IEEE and IEC references does not imply equivalency between the individual references of the two sets. Intended use The standard applies to instrumentation intended for use during anticipated operational occurrences (AOO), design basis events (DBE), and design extension conditions (DEC) including severe accidents. This standard defines severe accidents as a subset of design extension conditions during which fuel damage has occurred. Operationally, severe accidents and design ex